What Maintenance Does a Car Need at 50,000 Kilometers?

1 Answers
DelaneyLynn
07/28/25 2:51pm
At 50,000 kilometers, a car requires an oil and oil filter change, possible replacement of spark plugs, brake pads, tires, battery, and other components. It also involves inspection and maintenance of the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tire systems. Here is a detailed introduction to car maintenance items: Oil and Oil Filter Replacement: This primarily targets the lubrication system's maintenance. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter removes impurities from the oil to ensure the lubrication system operates normally. The oil filter should be replaced along with the oil during an oil change. Under normal circumstances, a car requires maintenance every 5,000 kilometers. Filter Replacement: The air filter's role is to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter is typically replaced at 20,000 kilometers. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads are part of the inspection items during routine maintenance, with maintenance performed based on usage conditions.
Was this review help?
12
2
Share
More Forum Discussions

How to Replace the Air Filter Element?

Replacing the air filter element involves the following steps: 1. Open the engine hood and locate the air filter housing. Some housings are secured with screws, while others use clips. If secured with screws, use a screwdriver to open it. 2. Remove the old filter element from the housing. To prevent dust and debris from falling in, cover the intake pipe with a clean towel. 3. Install the new air filter element, fasten the clips (or use a screwdriver to tighten the air filter housing cover), and close the engine hood to complete the replacement. The air filter consists of the filter element and the housing. The filter element is responsible for filtering the air, removing dust and sand particles to ensure that clean and sufficient air enters the cylinders.
11
4
Share

How to Step on the Accelerator in an Automatic Transmission Car?

Automatic transmission cars require the following method to step on the accelerator: press down on the accelerator, and when the RPM rises to the gear-shifting range (approximately between 2000 and 2500 RPM), lightly release the accelerator (the automatic transmission will issue a command to upshift) before pressing it again. This method ensures smooth gear shifting. Continue to upshift and accelerate accordingly. An automatic transmission allows the car to automatically shift into different gears based on the driver's manipulation of the accelerator pedal according to driving needs, engine load, and the car's operating conditions. The method to start an automatic transmission car is as follows: 1. Turn on the power and start the car; 2. After ignition, press the brake, shift into D gear, release the handbrake, and slightly press the accelerator to start; 3. After starting, accelerate reasonably according to road conditions.
16
4
Share

How many liters of engine oil does a Land Rover 3.0T require?

Land Rover 3.0T requires 8 liters of engine oil. When adding engine oil, it is essential to ensure that the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or exceed the max mark. The functions of engine oil include cooling, sealing to prevent leaks, cleaning, shock absorption, lubrication to reduce wear, rust and corrosion prevention, and component protection. Taking the Land Rover Defender as an example, its dimensions are 5018mm in length, 2008mm in width, and 1967mm in height, with a wheelbase of 3022mm. The Land Rover Defender is equipped with a 3.0T turbocharged engine, delivering a maximum torque of 550Nm and a maximum power of 294kW.
6
2
Share

What are the hazards of engine oil emulsification to the engine?

Engine oil emulsification poses the following hazards to the engine: The lubrication performance of the oil deteriorates, and prolonged use of emulsified engine oil can affect the engine's lubrication and heat dissipation, potentially causing severe damage to the engine. After engine oil emulsification occurs, the cause of the emulsification should be identified and repaired, followed by the replacement of new engine oil. When engine oil emulsifies, white emulsion-like substances form inside the engine, which can be seen by opening the engine oil filler cap. Engine oil needs to be replaced regularly, as prolonged use can degrade all aspects of the engine's performance. With the continuous improvement in oil quality, the service life of engine oil has become increasingly longer, with some oils lasting up to hundreds of thousands of kilometers before needing replacement.
19
3
Share

How to Adjust the Front Passenger Seat Backrest?

The method to adjust the front passenger seat backrest is as follows: 1. Forward and backward adjustment: Lift the adjustment handle located at the lower right side of the seat to release the locking mechanism, allowing the seat to move forward or backward. Release the handle once the desired position is reached to lock the seat in place. 2. Angle adjustment: Rotate the adjustment knob on the left side of the seat to modify the angle based on the passenger's physique. Adjust the backrest angle by applying force with your back until your palms can comfortably press against the top of the steering wheel. The steps to remove the seat backrest are: 1. Remove the headrest from the backrest. 2. Take out the plastic collar securing the headrest. 3. Lift the entire seat backrest upward to detach it.
9
0
Share

What are the differences between the Magotan Leading Edition and Luxury Edition?

The differences between the Magotan Leading Edition and Luxury Edition are: 1. Different LCD instrument clusters: The Leading Edition requires an optional 10.3-inch LCD instrument cluster; the Luxury Edition comes standard with a 10.3-inch LCD instrument cluster. 2. Different power seats: The Leading Edition lacks power seat memory function; the Luxury Edition features power driver's seat memory function. 3. Different ambient lighting: The Leading Edition has no ambient lighting; the Luxury Edition is equipped with single-color ambient lighting. The Magotan is a mid-size sedan under Volkswagen. In terms of power, this model uses three engines: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.