What Lights to Use on Highways at Night?

1 Answers
DelOwen
07/29/25 5:30pm
When driving on highways at night, use low beams if the speed is below 30 km/h, ensuring the light illuminates beyond 30 meters. For speeds above 30 km/h, use high beams, with the light reaching beyond 100 meters. Below are precautions for nighttime driving: 1. Avoid Overtaking: Try to avoid overtaking at night. If overtaking is necessary, accurately assess the situation ahead, ensure conditions are suitable, follow the vehicle in front, continuously switch between high and low beams (and use the horn if necessary) to signal the vehicle ahead to yield. Only overtake when you are certain the vehicle ahead has yielded. 2. Pay Attention to Road Conditions: During nighttime driving, be mindful of road obstacles, construction signal lights, etc. In poorly lit areas where road conditions are unclear, reduce speed.
Was this review help?
9
0
Share
More Forum Discussions

What Causes the Smell When Turning on the Car Air Conditioner?

The reasons for the smell when turning on the car air conditioner are: 1. Overheated wires or short circuits in electrical components; 2. Dirty air conditioning filter or unclean air ducts; 3. Malfunctioning tires or rubber belts, producing a burnt rubber smell; 4. Damaged fuel tank or leaks in the fuel supply system; 5. Leakage or shortage of electrolyte; 6. Burnt clutch plate or failure to release the handbrake. Solutions to eliminate the smell when turning on the air conditioner include: 1. Placing fruits with strong adsorption capabilities like pomelo peels, pineapples, and lemons in the car; 2. Using white vinegar with sterilizing and cleaning properties inside the car; 3. Utilizing activated charcoal to remove odors; 4. Removing protective films inside the car; 5. Opening windows for ventilation; 6. Spraying an appropriate amount of air freshener.
13
4
Share

What is the flashing red dot in the car?

A flashing red dot inside the car is the indicator light of the vehicle's anti-theft system. After locking the car, if it does not flash, it indicates that the car is not properly locked or the anti-theft system has malfunctioned; if it flashes, it means the anti-theft system is functioning normally. The functions of the car anti-theft system are: Automotive electronic anti-theft refers to the use of electronic signal transmitters and receivers to achieve anti-theft functions. The electronic anti-theft system mainly consists of an electronically controlled remote or key, electronic control circuit, alarm device, and actuator. The key has a chip that amplifies this signal when near the ignition lock. The anti-theft computer will identify whether the key is legitimate. If legitimate, it allows the engine to start; if not, the engine will not start. By locking the ignition switch and prohibiting vehicle startup, the purpose of car anti-theft is achieved. Once in "anti-theft" mode, an audible alarm is triggered. If there is a problem with the anti-theft system, it should be repaired at a 4S shop; otherwise, the car is at risk of being stolen by criminals. If the car is not used for a long time, the battery's negative terminal can be disconnected, but this will stop the anti-theft system from working. Therefore, if the car is not used for an extended period, it is beneficial to drive it around occasionally, which is good for both the car and the battery. Long-term parking accelerates the aging of some car components. With technological upgrades and improvements, modern vehicles are almost all equipped with electronic locks. When the electronic lock is activated, a flashing red light appears, which is a normal phenomenon. The advantage of electronic locks is that there is no keyhole on the outside of the door, and the fuel tank cap has anti-theft treatment. Nowadays, car thefts are becoming increasingly rare. The main types of electronic anti-theft systems include: key-controlled, remote-controlled, alarm-type, and anti-theft systems with both alarm and vehicle immobilization features. In case of theft attempts, besides sounding an alarm, these systems can also cut off the car's starting circuit, ignition circuit, or fuel line to prevent the car from being moved.
14
2
Share

What is the horsepower of the Lynk & Co 03?

The horsepower of the Lynk & Co 03 varies depending on the engine model: 1. The model equipped with the low-power version 1.5T engine has 156 horsepower; 2. The high-power version 1.5T engine has 180 horsepower; 3. The 2.0T engine has 190 horsepower. Taking the 2021 Lynk & Co 03 as an example, it is a compact car with body dimensions of: length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 is equipped with a 1.5T inline 3-cylinder turbocharged engine, with a maximum horsepower of 156ps, maximum torque of 245Nm, and maximum power of 115kW, paired with a 6-speed manual transmission.
9
5
Share

Can You Shift from D to S While Driving an Automatic Transmission?

You can shift from D to S while driving an automatic transmission. You need to press the shift lock, and there's no need to release the accelerator or apply the brakes. Precautions for shifting gears in an automatic transmission vehicle: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting into gear; 3. The vehicle can only be started in P or N gear; 4. To remove the gear lever from P, you must press the brake; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing the direction of travel, switching between D and R gears should be done only after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the internal components of the transmission to overheat and result in damage.
15
5
Share

Where to Add Water to the Crown Radiator?

The radiator of the Crown is located in the engine compartment between the engine and the grille for adding water. Taking the 2018 Crown as an example, it is a mid-to-large-sized car with body dimensions of 5020mm in length, 1805mm in width, and 1480mm in height, a wheelbase of 2925mm, a minimum ground clearance of 140mm, and a body weight of 1660kg. The 2018 Crown features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 235PS, a maximum torque of 350Nm, and a maximum power of 173kW, paired with an 8-speed automatic transmission.
8
3
Share

What is the solution for the dashboard showing low water temperature?

The solutions for the dashboard showing low water temperature are: 1. The water temperature sensor is damaged; 2. The coolant in the car is insufficient. The reasons for high water temperature in a car are: 1. Scale deposits in the radiator and engine water jacket, leading to poor heat dissipation and rising water temperature; 2. The thermostat is damaged, preventing coolant from entering the radiator circulation; 3. The water pump is damaged or the drive belt is slipping, causing poor water pump performance; 4. Insufficient antifreeze leads to poor engine heat dissipation; 5. The cooling fan is faulty or running at low speed. The solutions for high water temperature in a car: 1. Clean the scale deposits in the engine; 2. Inspect or replace the thermostat; 3. Inspect or replace the water pump; 4. Add antifreeze to the engine; 5. Check the cause of the fan malfunction or low speed.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.