What Lights to Use in Foggy Weather for Cars Without Fog Lights?

1 Answers
Phil
07/29/25 10:31pm
Cars without fog lights can turn on the width indicator lights and low beam headlights when driving in foggy weather. Here is some relevant information: 1. Fog Lights: Fog lights refer to automotive fog lights installed at the front and rear of the car, used for illuminating the road and providing safety warnings in rainy or foggy weather. Fog lights have strong penetration, improving visibility for the driver and other traffic participants, whereas regular LED daytime running lights and headlights cannot meet this requirement. 2. Classification: There are two types of front fog lights. One is the yellow projection type, mainly utilizing the penetration of yellow light to see the road ahead clearly. The other is the downward projection type, primarily illuminating the ground near the front of the car.
Was this review help?
11
2
Share
More Forum Discussions

Where is the Mercedes-Benz wiper switch located?

The wiper switch of Mercedes-Benz vehicles is located on the left side of the steering wheel, combined with the light control on a single lever. Mercedes-Benz wipers' automatic intermittent working mode can adjust the swinging frequency, allowing the wiper's movement to vary based on vehicle speed. When the wiper lever is set to the automatic intermittent mode, the wiper will change its swinging frequency according to the adjusted setting and the vehicle's speed. Wipers are also known as windshield wipers or windscreen wipers, and they are devices used to remove raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Precautions for using wipers: Check whether the upper and lower wipers swing in sync; if not, correct them promptly. If the wiper makes a heavy "squeaking" sound while working, there might be an issue with its adjustment or excessive downward pressure. If some moisture remains on the windshield after several wipes, it indicates that the rubber blade is aged and needs replacement. Never operate the wipers dry, as this can damage them and potentially scratch the windshield if sand or other debris is present. Regularly lubricate the wiper joints to reduce mechanical friction. Remove debris promptly; if leaves or other debris accumulate on the windshield after parking, avoid using the wipers directly to clear them. Avoid forcibly peeling off frozen wipers or pouring hot water, as this may cause the wiper blade to tear or the windshield to crack. Instead, start the vehicle, turn on the heater, and direct warm air toward the windshield to thaw the wipers. Additionally, when choosing windshield washer fluid in winter, opt for an antifreeze type based on local temperatures. In colder northern regions, choose a specialized antifreeze washer fluid that remains effective even at -40°C.
16
3
Share

Which has higher fuel consumption, the Taurus or the LaCrosse?

The Taurus has higher fuel consumption. More extended information is as follows:1. Overview of the Taurus: The Ford Taurus, introduced in 1995 with a brand-new appearance, saw no major changes in the new year. The lineup includes four-door luxury models and station wagons. There are various engine options available, with the base model featuring a traditionally crafted 3-liter 2-valve V6 engine with a mid-mounted camshaft. A higher-tier configuration includes a 3-liter 6-cylinder engine with 200PS. The powerful SHO variant is exclusively available in the four-door luxury model. The SHO variant is equipped with a 3.4-liter V8 engine developed in collaboration between Ford and Japan's Yamaha, featuring dual overhead camshafts per cylinder bank, 4 valves per cylinder, advanced technology, and ensuring a powerful driving experience for this model. The Ford Taurus comes in three models: LX, GL, SE, and SHO. 2. Overview of the LaCrosse: The LaCrosse is a new mid-to-high-end sedan launched by SAIC-GM on February 22, 2006. The 'Jun' in its name represents a high-class, premium image, while 'Yue' carries the meaning of 'breakthrough and transcendence.'
17
5
Share

Why can't the trunk of the classic Focus be opened?

Linkage rod or lock cylinder issue. Detailed explanation for the classic Focus trunk not opening is as follows: 1. Linkage rod or lock cylinder problem: If you frequently use the key to open the trunk, the linkage rod may be broken. Go to a repair shop for inspection. If you always use the remote control to open the trunk, the lock cylinder may be dirty or rusted. Spray some rust remover into the lock cylinder a few times to open it. 2. Frozen or stuck: If washed in winter, it might be frozen. In summer, something might be stuck. 3. Trunk itself has issues: The trunk itself may have problems, such as a broken wire or other trunk-related issues causing the car trunk not to open.
14
2
Share

How often should the transmission fluid be changed for a classic Focus?

For the classic Focus, the transmission fluid should be changed approximately every 2 years or 60,000 kilometers. The consequences of not changing the fluid for a long time and the methods are as follows: Consequences of not changing the fluid for a long time: Automatic transmission fluid and manual transmission fluid are different. Automatic transmission fluid first serves a lubrication function and second, it also facilitates gear shifting. Therefore, not changing it for a long time can lead to poor lubrication in the transmission, severe wear of components, and a shortened lifespan of the transmission. It can also cause strong jerking sensations during gear shifts. Hence, it is necessary to change the transmission fluid regularly, and at the same time, the transmission fluid filter should also be replaced. Methods for changing transmission fluid: There are two methods for changing the fluid: one is gravity replacement, and the other is machine circulation replacement. Machine circulation replacement is recommended because it can clean the transmission, whereas gravity replacement only changes the fluid and does not provide a cleaning effect.
6
1
Share

What is the tire model of the imported Volkswagen Touareg?

The tire model of the imported Volkswagen Touareg is 255/55R19. The first number 255 indicates the tire width is 255MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 19 denotes the rim diameter is 19 inches. The imported Volkswagen Touareg has a top speed of 229km/h and can accelerate from 0 to 100km/h in 6.8 seconds. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".
13
0
Share

What type of engine oil is suitable for Jinbei Haishi?

Jinbei Haishi uses 5W-30 semi-synthetic engine oil. For later maintenance and oil changes, you can choose fully synthetic oils from Shell or Mobil. The official manual recommends using 5W-30 engine oil. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better ability to maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in Jinbei Haishi is as follows: Wait for the engine temperature to drop, allowing the oil to flow back to the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add new engine oil through the filler port on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.