What lights should be used when passing through an intersection at night?

2 Answers
MacRowan
07/24/25 12:32pm
When passing through a signalized intersection at night, low beam headlights should be used. Here are the specific details: 1. Passing through intersections at night. If passing through an intersection without traffic signals, it is necessary to alternate between high and low beam headlights when approaching the intersection to alert vehicles and pedestrians in the perpendicular direction. Additionally, speed should be reduced when nearing the intersection to prevent sudden incidents, allowing sufficient time to respond. 2. Use of lights at night. When driving on well-lit roads, low beam headlights should be used, and they should also be used when following another vehicle to make it easier for the preceding vehicle to observe the situation behind through the rearview mirror. If meeting an oncoming vehicle at a distance of 150 meters, high beams should be switched to low beams. Furthermore, when driving at night and encountering slopes, arched bridges, crosswalks, sharp curves, or when overtaking another vehicle, it is necessary to alternate between high and low beam headlights.
Was this review help?
5
1
Share
AdrielFitz
08/11/25 6:39am
When driving through intersections at night, I always switch to low beams. High beams are too glaring and can momentarily blind drivers coming from the opposite direction or the sides, making it difficult for them to see the road ahead. If a pedestrian or cyclist suddenly crosses, it could easily lead to a serious accident. Once late at night at an intersection, I almost hit a cat, but because I was using low beams, the light was evenly distributed, providing clear visibility that helped me avoid danger. High beams are suitable for open highways, but intersections with complex traffic require low beams. It's important to regularly check the bulbs and lenses, as dust can cause the light to scatter more. Driving while fatigued at night is risky, but combining appropriate lighting with focused attention can protect both yourself and others. Once it becomes a habit, driving becomes safer and more civilized.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What to Do About Severe Oil Burning in Audi?

Audi's severe oil burning is caused by: 1. Using poor-quality oil or oil with an incorrect viscosity grade; 2. Excessive clearance between the piston rings and cylinder walls, improper installation of piston rings, or degraded sealing; 3. Overfilling of engine oil leading to oil burning; 4. Oil leakage from the turbocharger; 5. Leaking valve stem seals. The solutions for Audi's oil burning are: 1. Remove the engine cylinder head and replace the valve stem seals; 2. Remove the oil pan and replace the piston rings. Taking the 2021 Audi A3 Limousine as an example, its body dimensions are: 4543mm in length, 1815mm in width, 1458mm in height, with a wheelbase of 2630mm and a fuel tank capacity of 51 liters.
12
1
Share

How to Connect a Phone to a Car USB?

You need to use a car charger adapter. The details are as follows: Car Power Converter: A car power converter (also known as a power inverter or Power-Inverter) is a device that converts DC12V, DC24V, DC36V, or DC48V direct current into AC220V or AC110V alternating current, which is the same as household electricity, for use with general appliances. It is a convenient car power converter. How to Use a Car Charger: (1) Insert the USB car charger head into the car cigarette lighter, and output DC voltage through the standard USB interface. (2) The voltage, current, and other electronic design parameters fully comply with the PDA phone standard and will not damage the device. (3) Connect the USB data cable to power or charge various electronic products such as MP3/MP4, mobile phones, small speakers, Bluetooth devices, PSP, etc.
17
1
Share

How to turn on the headlights of a Polo?

The method to turn on the headlights of a Polo is: rotate the left low beam button to the low beam position to activate the low beams. Press the left lever on the steering wheel downward to switch to high beams, return it upward for low beams, and push it further upward to alternate between low and high beams (flashing). Taking the 2019 Polo as an example, its body dimensions are: length 4053mm, width 1740mm, height 1449mm, with a wheelbase of 2564mm. The 2019 Polo features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, maximum power of 83kW, and maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
3
Share

What are the causes of the Q5 sunroof rattling noise?

The causes of the Q5 sunroof rattling noise are: 1. Aging of the sunroof rubber seal or sealing ring; 2. Loose sunroof screws or malfunctioning lifting mechanism; 3. Dust particles in the sunroof sliding track. The maintenance methods for the car sunroof are: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof guide rails with a damp sponge; 2. Apply silicone oil to the sunroof seal after washing the car, which can effectively prevent the aging of the rubber seal and extend its service life. The solutions for sunroof rattling noise are: 1. Check the sunroof sliding track and add lubricating oil; 2. Tighten the sunroof screws; 3. Replace the rubber seal or sealing ring, and spray rubber conditioner on the seal.
9
1
Share

What are the precautions for stopping and taking the card in Subject 2?

Here are the precautions for stopping and taking the card in Subject 2: 1. Avoid crossing the line: When entering the stop-and-take-card section, in addition to looking at the front of the car and aligning the body, you should also pay attention to the rearview mirror to prevent the rear wheels from crossing the line. 2. Find the right position: During the test, control the speed, find the correct stopping position, and stop in time. Otherwise, if you miss the correct position, you will not be able to take the card (swipe the card), or if you reverse to adjust, you will fail. 3. Control the distance: Just like parallel parking, the stopping position for stopping and taking the card must also be controlled well. You cannot cross the line, but you cannot be too far away either. If it exceeds 50cm, you will lose 100 points.
4
4
Share

What is the purpose of installing a shark fin on a car?

Installing a shark fin on a car can enhance signal reception. Functional shark fin antennas need to be connected to the car's internal wiring and can integrate various powerful automotive electronic functions such as FM, GPS, and GSM, replacing and surpassing traditional rod antennas. Decorative shark fin antennas can also release static electricity and improve signal reception. Steps for installing a shark fin antenna: 1. Wrap the shark fin antenna with 3M tape, ensuring it is as flat as possible. 2. Remove the light on the rear seat of the car and take off the antenna base. 3. Determine and mark the correct position for the shark fin antenna. 4. Apply glue around the inner edge of the installation position, then peel off the tape on the shark fin antenna and align it to the marked position. 5. After installation, secure the shark fin with tape and remove the tape after 24 hours.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.