What lights should be used when passing through a crosswalk?

1 Answers
Costa
07/30/25 6:15am
Motor vehicles should alternately use high and low beams to signal when passing through a crosswalk at night. Here are the relevant regulations: 1. According to Article 58 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": When driving at night under low visibility conditions, motor vehicles should turn on headlights, width marker lights, and rear position lights. Motor vehicles driving in foggy weather should turn on fog lights and hazard warning flashers. 2. Article 59: When passing through an intersection with a crosswalk at night, motor vehicles should alternately use high and low beams to signal. When approaching sharp curves, the top of slopes, or other sections with limited visibility that may affect safety, or when overtaking or encountering emergencies, motor vehicles should slow down and sound the horn to signal.
Was this review help?
1
0
Share
More Forum Discussions

What is the floral formula of Plantago?

The floral formula of Plantago is ↑K(4)C(4)A4G(2:4) (superior ovary). Below are the floral formulas of some common plants: Magnoliaceae: The white orchid belongs to the Magnoliaceae family. The floral formula of Magnoliaceae is: *P6-15, A∞, G∞. Therefore, *P6-15, A∞, G∞ is also the floral formula of the white orchid. Cucurbitaceae: The floral formula of Cucurbitaceae is ♂: K(5)C(5)A1(2)(2), ♀: K(5)C(5)(3:1) or ♂: K(5)C(5)A[1(2)(2)], ♀: K(5)C(5)(3:1). These are climbing or creeping herbs. Common species include cucumber, winter melon, and watermelon.
8
5
Share

How many kilometers should the spark plugs of Haval H6 be replaced?

Haval H6 spark plugs should be replaced every 18 months or 18,000 kilometers, whichever comes first. The original spark plugs for Haval H6 use the Champion RC8PYCBX single platinum model. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be referred to for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Install the removed high-voltage distributor wires according to the firing order and secure the cover.
1
4
Share

What Causes the Steering Wheel of the Buick Excelle to Make Noise?

The reasons for noise in the Buick Excelle's steering wheel include friction between plastic parts, damage to the clock spring, aging of the steering tie rod ball joint, and loosening of the stabilizer bar. Friction between plastic parts: Since the steering wheel is usually made of plastic components, and as the temperature drops, the plastic hardens, causing friction noises. This is a normal phenomenon and nothing to worry about. Damage to the clock spring: If the noise comes from inside the steering wheel, it is most likely due to damage to the clock spring inside the steering wheel. The clock spring needs to be removed and replaced. Be sure to disconnect the airbag fuse to prevent the airbag from deploying. Aging of the steering tie rod ball joint: If the steering tie rod ball joint ages, it can cause the car's steering wheel to shake and make noise. In this case, the steering tie rod ball joint needs to be replaced, and a four-wheel alignment should be performed after replacement. Loosening of the stabilizer bar: If the noise is not coming from the shock absorber, check whether the stabilizer bar bushing is loose or damaged. A loose stabilizer bar bushing can be fixed by adding shims, but if it is damaged, it must be replaced. The reasons for noise in the Buick Excelle's steering wheel include friction between plastic parts, damage to the clock spring, aging of the steering tie rod ball joint, and loosening of the stabilizer bar.
15
3
Share

Which side is the brake and which is the accelerator?

In automatic transmission vehicles, the brake is on the left and the accelerator is on the right. Manual transmission vehicles have three pedals: the far left is the clutch, the middle is the brake, and the right is the accelerator. The positions of the brake and accelerator pedals in manual transmission vehicles are the same as in automatic transmission vehicles, except that manual transmission vehicles have an additional clutch pedal on the left. Below are some mnemonic tips for distinguishing between the brake and accelerator: 1. Left brake, right accelerator: Drivers should always remember that the left pedal is the brake and the right is the accelerator, forming a natural and firm concept in their minds. 2. Heel on the brake: Drivers should develop the habit of placing their heel directly under the brake pedal, allowing them to brake at any time in an emergency. 3. Tilt for the accelerator, straight for the brake: As mentioned, the heel is placed directly under the brake pedal, so the brake is pressed straight down, while the accelerator is to the right of the brake, requiring the toes to tilt to the right to press the accelerator without moving the heel. 4. Foot on the brake when idle: When not accelerating, keep the foot on the brake pedal to be ready for braking. If the foot is placed near the accelerator, it may lead to accidental pressing in a panic, whereas keeping it on the brake allows for better handling of sudden situations.
17
2
Share

Which mode should be used for Haval Big Dog on the highway?

Haval Big Dog uses Sport mode on the highway. Below is the relevant introduction of Haval Big Dog: 1. Design: Full of vitality, the Big Dog adopts a more personalized and rugged design language, featuring a three-spoke multifunction steering wheel, a D-shaped large touchscreen for human-machine interaction, a co-pilot grab handle identical to that of the Mercedes-Benz G-Class, and a more refined rotary electronic gear lever with retro-style air vents. Although it is a light off-road vehicle, it excels in terms of technological sophistication. It offers six driving modes: Economy/Standard/Sport/Sand/Mud/Snow, and may also be equipped with the new-generation L2.9 intelligent driving assistance system. 2. Engine: According to official information, the Big Dog is built on an all-new platform and will be powered by the same 2.0T or 1.5T engines and transmissions as current Haval models. Surprisingly, the 2.0T version will offer a four-wheel-drive model (with an optional rear differential lock configuration).
1
4
Share

What is the 10-Year Inspection Exemption Policy?

There is no 10-year inspection exemption policy for vehicles. Instead, new vehicles within the first 6 years can be exempted from inspection twice (requiring an inspection label application every two years without the need for an on-site vehicle inspection). At the 6th and 8th years, the vehicle must undergo an on-site inspection. For private cars over 10 years old, the original inspection cycle still applies: once a year for vehicles aged 10 to 15 years, and once every six months for vehicles over 15 years old. Regarding the scope of exemption: the new regulation includes 7 to 9-seater non-operational small and micro passenger vehicles (excluding minivans) within the 6-year exemption period. For non-operational small and micro passenger vehicles (excluding minivans) over 6 but under 10 years old, the inspection frequency is adjusted from once a year to once every two years. Relevant regulations: "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China": (1) Article 15: The safety technical inspection of motor vehicles shall be conducted by motor vehicle safety technical inspection institutions. These institutions shall inspect motor vehicles according to national safety technical inspection standards and bear legal responsibility for the inspection results. (2) Article 17: When a registered motor vehicle undergoes a safety technical inspection, if the registered contents on the motor vehicle's license do not match the actual condition of the vehicle, or if the mandatory third-party liability insurance certificate is not provided as required, the inspection shall not be passed.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.