What lights should be used when driving on the highway at night?

1 Answers
LeAthena
07/30/25 1:32am
Generally, when driving on the highway at night, low beam headlights should be used as long as the distance to the taillights of the vehicle in front is visible. Additional information: 1. Prepare for night driving: If planning to drive at night, the driver must get sufficient sleep and rest to ensure full energy for nighttime driving. 2. Maintain moderate speed at night: Due to the limited information available to the driver at night and slower reaction times compared to daytime, it is important to focus on observing the road, terrain, and obstacles. High-speed driving is not advisable; maintaining a moderate speed is sufficient. 3. Slow down in advance when transitioning from light to dark: When turning from a brightly lit street into a dark alley, the eyes need a few seconds to adjust. It is essential to slow down in advance. At this time, flash the high beams once to alert any potential pedestrians or vehicles in the alley.
Was this review help?
7
5
Share
More Forum Discussions

What does installing ETC in a car mean?

The device installed in a car for ETC is called an OBU device. Once the device is installed, activated, and a card is inserted, it can be used normally. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a specialized method for collecting tolls on roads, commonly seen on highways, toll bridges or tunnels, and certain sections of city centers to alleviate urban traffic congestion. According to regulations by the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they must be activated first. During holiday free periods, vehicles with ETC can still use highways, and no tolls will be deducted when passing through ETC lanes. ETC Deduction Principles: Highways have one or more ETC lanes. Using dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane, along with computer networking technology for backend bank settlements, the system allows vehicles to pay tolls without stopping at toll stations. This operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping. Reduces wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption. Users also enjoy a 5% discount on tolls. Improves efficiency: ETC lanes can theoretically increase traffic flow by 2-3 times, making traditional ETC faster, more advanced, and more efficient. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation cards, and the proportion of vehicles equipped with ETC should significantly increase." The plan also set a target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to improving the convenience of ETC installation and usage rates for passenger vehicles, the future will also promote ETC usage for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC. ETC Usage Notes: The ETC transaction sensing range is 8 meters. If the vehicle in front is stationary, maintain a distance of at least 10 meters to avoid mistakenly paying for the vehicle ahead due to faulty or missing ETC devices. The recognition speed for ETC lanes is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed toll deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the tag invalid. In such cases, the device can be taken to the bank where the ETC card was issued or to a highway service office for inspection. If the issue is not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause toll deduction failures. Follow the guidance of on-site staff and use manual MTC lanes to pay with cash or cards. Thick car windshields may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.
13
0
Share

What is the reason for the flashing electronic handbrake warning light in the Haima F7?

The reasons for the handbrake light and brake system light being on include the handbrake not being fully released, brake fluid leakage, or worn brake pads. Handbrake not fully released: You can pull the handbrake and release it again to ensure it is properly engaged. Brake fluid leakage: You can visit a repair shop or 4S store to inspect and fix the leakage point, then refill the brake fluid. These two lights will then turn off, and the system will return to normal. Worn brake pads: This causes the brake fluid level in the reservoir to drop. When the level drops to the point where the sensor is activated, the handbrake light will illuminate. However, if the fluid level is just at the threshold of activation, the handbrake light may flicker on and off as the vehicle moves. Solution: Under the premise of ensuring normal vehicle braking, you should drive to a repair facility as soon as possible for maintenance. If the vehicle's braking is abnormal, park in a safe location and wait for assistance. In cases of brake pedal failure or other special circumstances, pull the control handle to engage the brakes. Pulling the control handle provides braking, while releasing it does not.
3
0
Share

What is the recommended tire pressure for highway driving?

Generally, the tire pressure of a car should be maintained at around 220-260 kPa. Before driving on the highway, it is advisable to inflate the tires to approximately 250 or 260 kPa. Below are some relevant details: 1. Definition of tire pressure: Strictly speaking, tire pressure refers to the air pressure inside the tire. In car maintenance, the engine plays the role of the car's heart—if the engine is damaged, the car's lifespan will be exhausted. Similarly, tire pressure symbolizes the car's blood pressure, and its level has a crucial impact on the car's performance and power. Tire pressure is the lifeblood of the tire; both excessive and insufficient pressure will reduce the tire's lifespan. 2. Dangers of low tire pressure: If the tire pressure is too low, it can cause excessive deformation of the tire's cord layers during highway driving. As the speed increases, this may even lead to the phenomenon of standing waves in the tire, and in severe cases, it can cause a tire blowout (the fatality rate of high-speed blowouts is almost 100%). Therefore, to ensure driving safety on highways, it is essential to maintain adequate tire pressure. 3. Dangers of high tire pressure: If the tire pressure is too high, it can cause the tire cords to overstretch and deform, reducing the tire's elasticity and increasing the load during driving. This makes the tire more prone to internal cracks or bursts upon impact. Additionally, excessive tire pressure accelerates tread wear and reduces puncture resistance.
8
3
Share

Will the Car Air Intake Get Water in Rain?

On rainy days, the car air intake will not get water. Here are specific measures for dealing with a water-soaked car: Slow down or stop: When encountering uncertain water levels, brake promptly without hesitation while driving. Stop to observe where the water line is when trucks or large vehicles pass through, and judge whether to proceed. Maintain slow speed without stopping: If the vehicle has already entered a deep water section, stay calm, keep the throttle steady to control speed, avoid shifting gears or stopping, and exit the area as quickly as possible. Post-disaster precautions: Even if the vehicle does not appear severely damaged, it is essential to have it inspected at a repair shop.
12
5
Share

Is It Harmful to Leave a Car Outside in the Rain?

Leaving a car outside in the rain can have negative effects. Here are the detailed impacts: The car's paint surface can be corroded. In many parts of the country, pollution is widespread, and some areas suffer from severe pollution, resulting in rain that is essentially acidic. Therefore, exposing the car's paint to rain is like exposing it to acid rain, which can corrode the paint, leading to water stains, oxidation, and even cracking. Precautions: Rainwater often contains acidic substances that can corrode the outer glossy layer of the paint. Additionally, rainwater carries invisible dust particles that, when exposed to sunlight, can generate large amounts of oxides. Hence, it is advisable to perform a paint treatment on your car after rain. A simple and effective method is waxing.
10
5
Share

Can You Still Practice Driving in the Rain for Subject Two?

It is not recommended to practice driving in heavy wind and rain. Below are some safety tips for driving in the rain: Reduce speed appropriately: Wet and slippery roads reduce tire grip, which can lead to loss of control when turning or overtaking. Therefore, it's advisable to lower your speed and minimize lane changes or overtaking maneuvers. Fogging inside the car: Rain significantly affects visibility by blurring the rearview mirrors. Additionally, to prevent rain from entering the car, many people roll up their windows, which can cause the interior to fog up. Loss of vehicle control: Puddles form on the road during rain, and when wheels suddenly enter these puddles, the sudden increase in resistance can easily cause the vehicle to skid or lose control.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.