What lights should be used for temporary parking by the roadside?

1 Answers
OValeria
07/29/25 10:46pm
For temporary parking by the roadside, you should use the position lights + hazard warning flashers. Below are precautions for light usage: 1. Low beam headlights: Low beams are frequently used, such as when meeting vehicles on narrow bridges or roads, driving straight through intersections with streetlights, or following vehicles closely in the same direction. 2. High beam headlights: High beams should be used cautiously, generally only when road illumination is poor or there are no streetlights. 3. Alternating between high and low beams: Alternating between high and low beams also requires attention to scenarios, such as sharp curves and slopes, arch bridges, overtaking near pedestrian crossings, or unlit intersections. 4. Others: Hazard lights can be used to signal danger, fog lights should be added when driving in foggy conditions, and position lights should also be activated when parking due to vehicle malfunction.
Was this review help?
18
5
Share
More Forum Discussions

Do motorcycles have fuel injectors?

Motorcycles have fuel injectors. Each cylinder is equipped with one fuel injector and one spark plug. Definition of fuel injector: The fuel injectors used in modern cars are essentially simple solenoid valves. When the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection port. Fuel is then sprayed at high speed through the annular gap between the needle valve head and the injection port, forming a mist that facilitates complete combustion. Working principle of fuel injector: A fuel injector is a normally closed valve (a normally closed valve remains closed when there is no control signal input, whereas a normally open valve remains open when there is no control signal input). The opening and closing of the valve is controlled by the up and down movement of a needle valve.
14
2
Share

What is the Impact of New Energy Vehicles on the Traditional Auto Repair Industry?

The rapid development of new energy vehicles is bound to threaten the traditional fuel vehicle industry and its supply chain. These impacts will directly affect the engine and transmission manufacturing industries, posing certain challenges to these sectors. The structure of pure electric vehicles is significantly simpler than that of traditional fuel-powered vehicles. Definition of New Energy Vehicles: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources (or conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and drive systems to form vehicles with advanced technical principles, new technologies, and innovative structures. Types of New Energy Vehicles: New energy vehicles include four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). Unconventional vehicle fuels refer to fuels other than gasoline and diesel.
17
2
Share

What is the function of the engine radiator?

The car radiator, also known as the heat exchanger, is a key component in the automobile cooling system. As an essential part of a water-cooled engine's heat dissipation circuit, the radiator absorbs heat from the engine block. Radiator working principle: The radiator is a vital component of water-cooled engines, serving as a major element in the engine's heat dissipation circuit. It absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, its temperature doesn't rise significantly after absorbing engine heat. The engine's thermal energy is transferred through the liquid cooling circuit using water as the heat transfer medium, then dissipated through large-area cooling fins via convection to maintain optimal engine operating temperature. Method for checking pipe blockage: Fill the radiator with water and secure the cap. Start the engine. Pinch the return hose halfway with one hand while revving the engine with the other. If the hose shows suction when engine speed increases, the radiator is functioning properly. Otherwise, it indicates blockage. This method also works for testing the water pump when the radiator is in good condition.
16
2
Share

How Many Years Can Putty and Paint Last?

Generally, putty and paint can last for 2 to 3 years. Automotive Painting Process: After metal sheet repair is completed, it is handed over to the painting department for pre-painting treatment, which takes two to five hours. Before painting, the repair area must be thoroughly cleaned, an evaluation of the work process is conducted, and non-repair areas are masked off. There are 12 steps in the treatment process, and if the primer is damaged, rust-proofing treatment is also required. Starting the Painting: Painting also involves several steps, briefly summarized as: rust-proof paint, body filler, first coat primer, mid-coat primer, and topcoat. Completing these steps takes 2-4 hours, with the most critical step being color matching, making the entire process quite complex. Paint Surface Treatment: Removing pinholes and achieving a mirror finish. This is commonly referred to as grinding, polishing, and waxing, which also takes 2-3 hours to complete.
18
4
Share

What Causes the Squeaking Sound from the Sunroof?

The reasons for the squeaking sound from the sunroof: Aging of Sunroof Seals or Gaskets: Sunroof seals are often exposed to rain or direct sunlight, which can cause them to deteriorate. Rubber conditioner can temporarily restore the performance of the seals. Open the sunroof fully and spray the conditioner onto the seals. Of course, a more direct solution is to replace the sunroof seals. Loose Sunroof Screws: Loose screws can cause noises from the roof lining and the sunroof, and may even pose a risk of the sunroof detaching. Locate the sunroof screws and tighten them. Dust Particles in the Sunroof Tracks: With repeated opening and closing of the sunroof, dust inevitably accumulates in the track gaps. When enough dust builds up, friction occurs during operation, leading to noise. Use a cloth to remove the dust, and regular maintenance is essential.
17
2
Share

Which joint-venture Yamaha model offers better value for money?

Yamaha Fuxi offers relatively high cost performance. Other Yamaha joint-venture models with good cost performance include: Yamaha Xunying 125, which performs well in all aspects with a stylish appearance, but is slightly more expensive and has lower cost performance. Yamaha JOG is compact and convenient, but its price has risen to a relatively high level. Reasons why Yamaha Fuxi offers better value for money: Compared to the JOG, the Fuxi has the same configuration but a different front face, and is cheaper than the JOG. The main reason Fuxi hasn't seen a price increase is because the JOG is selling too well while the Fuxi is overlooked. In fact, the two models are the same—the JOG has a round face, while the Fuxi has a pointed face. Both the JOG and Fuxi have a displacement of 100cc. Although this is smaller than the Xunying 125, their speed is faster than the Xunying.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.