What lights should be turned on when entering a tunnel in Subject 2?

What are the reasons for the sluggish and dull acceleration of Wuling Zhiguang?

Wuling Zhiguang's sluggish and dull acceleration is caused by exhaust, fuel system, electrical system, and exhaust issues. Intake system: Check if the air filter is clogged. Fuel system: Check if the fuel filter is clogged; inspect whether the engine fuel supply rubber hose is aged or cracked; disassemble the fuel injector and clean it with carburetor cleaner; disassemble the fuel supply pipe on the engine side and try starting the engine, directing the fuel pipe elsewhere to see if the fuel sprays vigorously; if the pressure is low, the fuel pump may be faulty. Electrical system: Disassemble the spark plug to check for severe blackening; inspect the high-voltage coil wiring for any damage. Exhaust system: Run the engine for a while; open the hood and observe if the exhaust pipe turns red, indicating poor exhaust flow.

11

1

Share

What is the top speed of the GAC Emkoo?

The top speed of the GAC Emkoo is 80km/h. Below is relevant information about the GAC Emkoo: 1. Product Introduction: The GAC Trumpchi Emkoo is a sporty sedan built on the GPMA platform. In terms of powertrain, the initial models are equipped with GAC's new 1.5T engine from the Julang Power series, with potential future additions of a 2.0T version. 2. Exterior and Interior: The GAC Trumpchi Emkoo adopts a 'Light Sculpture Surface' design language, offering two styling variants – Sport and Luxury. Specifically, the Sport variant features a large hexagonal front grille with vertical slats, accented by two blue polygonal decorative elements resembling fighter jet air intakes, complemented by carbon-fiber-like trim. The sharp-looking headlights incorporate two vertically aligned LED light strips, officially named 'Full-LED Sharp Edge Headlights'. Additionally, the side air intakes are adorned with blade-like accents, enhancing both sporty aesthetics and aerodynamic performance.

19

0

Share

Is the Sun Film Applied on the Inside or Outside of the Glass?

The sun film is applied on the inside of the glass to protect it from damage caused by external conditions. Below is an introduction to car window films: Introduction: Car window films are thin layers applied to the front and rear windshields, side windows, and sunroofs of vehicles. These films are also known as sun films or heat-insulating films. Their primary functions include blocking ultraviolet (UV) rays, reducing heat, preventing injuries from shattered glass, minimizing glare, and, due to their one-way transparency, protecting personal privacy. Additionally, they help reduce damage to interior items and passengers caused by UV exposure. By reflecting sunlight physically, they lower the interior temperature, reducing the need for air conditioning, which in turn decreases fuel consumption and saves costs. Benefits: Heat Insulation and Sun Protection: The film effectively blocks a significant amount of heat generated by infrared rays. UV Protection: Medium and long-wave UV rays can penetrate thick glass, but the heat-insulating film blocks most UV rays, preventing skin damage and slowing the aging of car interiors. Safety and Explosion Prevention: The base layer of the film is made of polyester, which is highly resistant to tearing and puncturing. Combined with the adhesive layer, the film enhances the glass's strength, preventing injuries to passengers in case of accidental breakage.

17

1

Share

What documents are required for the first maintenance?

First maintenance requires documents such as the driver's license, maintenance manual, and warranty manual. Current vehicle models are covered by nationwide warranty, allowing free first maintenance at any 4S shop across the country. First maintenance refers to the initial service after a new car has been driven, and the timing varies by vehicle, typically after driving 1,000 to 3,000 kilometers. Purpose of first maintenance: Ensure the vehicle's optimal performance state; enhance driving safety; reduce engine noise; extend the vehicle's service life. Contents of first maintenance: Replace engine oil and oil filter; inspect the operation of the braking system, such as the gap and wear of brake pads and discs; check the bolts of various systems; inspect and adjust drive belts; check and adjust tire balance and alignment; inspect and replenish various fluids; check the operation of components such as lights, battery, and shock absorbers. Points to note for first maintenance: Be sure to grasp the optimal timing for first maintenance, which is usually specified in the user manual; understand the required first maintenance items; changes in the car after first maintenance; call ahead to schedule the first maintenance appointment.

8

5

Share

Can the Brake Pads of Trumpchi GA5 Be Enlarged in Size?

Trumpchi GA5 brake pads cannot be enlarged in size. The original size must be used, as the space for installing the brake pads is already designed and cannot accommodate larger brake pads, nor can smaller ones be installed. Introduction to Brake Pads: Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking relies on the brake pads, making high-quality brake pads the guardian of both people and vehicles. Composition of Brake Pads: Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting temperature distribution. The heat insulation layer is made of non-conductive materials to provide thermal insulation. The friction block is composed of friction materials and adhesives, which are pressed against the brake disc or drum during braking to generate friction, thereby achieving the purpose of deceleration. Due to friction, the friction block gradually wears out, and generally, the lower the cost of the brake pads, the faster they wear.

10

0

Share

Is the Vellfire a domestically produced car?

The Vellfire is not domestically produced; it is an imported luxury MPV model. More relevant information is as follows: 1. The Vellfire is a hybrid vehicle, equipped with a 2.5-liter naturally aspirated engine. This 2.5-liter naturally aspirated engine has the model code 2AR-FXE, with a maximum power output of 86 kW. The engine can deliver its maximum power at 4,700 rpm and its maximum torque between 2,800 and 4,000 rpm. 2. This engine features VVT-i technology and hybrid injection technology, and it uses an aluminum alloy cylinder head and block. The vehicle is equipped with two electric motors, one on the front axle and another on the rear axle. The front axle motor has a maximum power of 105 kW and a maximum torque of 270 Nm, while the rear axle motor has a maximum power of 50 kW. The vehicle offers strong performance and excellent fuel economy. 3. The Vellfire uses a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. This vehicle is four-wheel drive. The Vellfire provides excellent ride comfort and has a spacious interior.

1

4

Share

What lights should be turned on when entering a tunnel in Subject 2?

What are the reasons for the sluggish and dull acceleration of Wuling Zhiguang?

What is the top speed of the GAC Emkoo?

Is the Sun Film Applied on the Inside or Outside of the Glass?

What documents are required for the first maintenance?

Can the Brake Pads of Trumpchi GA5 Be Enlarged in Size?

Is the Vellfire a domestically produced car?

What are the reasons for the sudden automatic parking failure in Haval H2?

What kind of oil is generally used for naturally aspirated engines?

Where is the spare tire placed in the Hongguang MINIEV?

Can I Claim Insurance for Water Accumulation in the Car Due to a Clogged Sunroof?