What lights should be turned on when encountering vehicles in foggy weather?

1 Answers
Sam
07/30/25 6:19am
Turn on both front and rear fog lights, and you can also activate the hazard warning lights when encountering vehicles, while using the high-low beam switching. Here are some precautions for driving in foggy weather: 1. Proper use of lights: When driving in foggy weather, the driver should turn on both front and rear fog lights. If the fog is extremely heavy, the hazard warning lights can also be activated. The main purpose of turning on fog lights and hazard warning lights is to allow other drivers to observe better and avoid rear-end or scraping accidents. 2. Timely roadside parking: If heavy fog suddenly appears and there is no time to enter the nearest service area, park the car on the emergency stopping lane of the highway as soon as possible, while turning on the fog lights, width lights, and tail lights. In addition, set up warning signs more than 150 meters away in the direction of oncoming traffic.
Was this review help?
5
0
Share
More Forum Discussions

What causes a Camry to suddenly stall?

The sudden stalling of a Camry may be caused by low-voltage power failure during driving. The relevant explanations are as follows: 1. Reasons for stalling: Excessive carbon deposits in the throttle body, idle speed motor, intake tract, intake valves, and combustion chamber may lead to sudden vehicle stalling. Carbon buildup roughens the inner walls of the intake pipes, creating vortices at these rough spots that affect air intake efficiency and fuel-air mixture quality, resulting in stalling. 2. Solution: Immediately turn on hazard warning lights, then grip the steering wheel and use intermittent braking (the brake system remains functional after engine stall - the first few brake applications will still work). After the vehicle comes to a complete stop, place warning triangles 200 meters behind the car.
7
1
Share

What is the function of ACC adaptive cruise control?

ACC adaptive cruise control, also known as active cruise control, is an intelligent automatic control system. The following is an introduction to the ACC adaptive cruise control system: 1. Detecting vehicles ahead: (1) Adaptive Cruise Control (ACC) is a vehicle function that allows the vehicle's cruise control system to adjust speed according to driving conditions. (2) The radar installed at the front of the vehicle is used to check whether there is a slower vehicle ahead. If the system detects that the vehicle ahead is not on the driving path, it will accelerate the vehicle to return to the previously set speed. 2. Features of the ACC adaptive cruise control system: The greatest advantage of the adaptive cruise control system is that it can not only maintain the speed preset by the driver but also reduce the speed as needed under specific driving conditions, even automatically braking. 3. Function of the ACC adaptive cruise control system: Through feedback signals from distance sensors, the ACC control unit can judge road conditions based on the moving speed of objects approaching the vehicle and control the vehicle's driving state.
9
5
Share

Should a Broken Headlight Bracket Be Repaired or Replaced?

The headlight bracket not only provides support for the lamp but also offers additional support for the front bumper. If the headlight bracket is broken, it should be replaced directly for the following reasons: 1. Repairing a broken bracket is difficult and troublesome. 2. Even if repaired, there may still be other safety hazards, making it unsafe. Relevant information about car headlights is as follows: 1. Car headlights: Also known as car front headlights or car LED daytime running lights, they serve as the 'eyes' of the car. They not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. 2. Function: The headlight assembly also includes position lights, which are used for driving in the evening or at night to inform other drivers of your position, enhancing safety during nighttime driving.
3
5
Share

Why does the Audi A6L's brake pedal feel hard when pressed?

Audi A6L's brake pedal feeling hard when pressed can be attributed to the following reasons: Brake booster pump failure: A malfunction in the brake booster pump can result in a lack of assistance when braking, making it difficult to press the pedal. Engine vacuum tube blockage: Another possible reason is a blockage in the engine vacuum tube, which can also cause the brake pedal to feel very hard when pressed. Brake master cylinder and slave cylinder sticking: If the brake master cylinder and slave cylinder are stuck, it can make braking difficult, giving a particularly hard and unyielding feel when pressing the pedal. Brake fluid pipe blockage: A blockage in the brake fluid pipe can prevent proper lubrication when braking, leading to increased difficulty in pressing the brake pedal.
18
3
Share

Does the new Audi S4 no longer have exhaust sound?

Audi S4 does have exhaust sound, and it's quite captivating. The S4 is a mid-sized performance vehicle under the Audi brand. Here are the relevant details: 1. Configuration: The Audi S4 is equipped with a 3.0T V6 turbocharged engine. This engine delivers a maximum power of 260kW and a peak torque of 500N·m, offering abundant power output. It also features multiple driving mode switching functions. All models come with a four-wheel drive system, paired with an 8-speed automatic manual transmission, achieving a 0-100km/h acceleration time of 4.7 seconds. 2. Interior Configuration: The central control area of the Audi S4 utilizes an 8.3-inch LCD display, and this model is fitted with an 8.3-inch floating standard LCD screen.
3
3
Share

Do Verna brake pads need to be replaced both front and rear?

Verna brake pads do not need to be replaced together front and rear. Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drum or brake disc rotating with the wheels. The friction linings and friction blocks within them bear external pressure, generating friction to achieve the purpose of vehicle deceleration. The Verna has a length, width, and height of 4340mm, 1700mm, and 1460mm respectively, with a wheelbase of 2570mm. The practicality of the Verna sedan's overall configuration is quite good, with all models equipped with dual airbags, engine electronic anti-theft devices, multifunction steering wheel, etc., providing great convenience for daily driving.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.