What lights should be turned on when driving on the highway at night?

2 Answers
StValerie
07/29/25 4:55am
When driving on the highway at night, you should turn on the high beams, low beams, turn signals, and width indicators. Below are the correct practices for using lights and precautions for nighttime driving: Correct practices for using lights: During normal driving, turn on the night lights and width indicators. If there are no vehicles ahead, you can appropriately use the high beams to briefly observe the road surface and surrounding conditions at a greater distance ahead, then quickly switch back to low beams. When meeting another vehicle, use a combination of high and low beams. If there is a vehicle ahead or an oncoming vehicle, switch from high beams to low beams. Precautions for nighttime driving: When driving at night, it is essential to control your speed; pay attention to road conditions; as drivers' reaction times decrease at night, it is even more important to reduce speed and maintain a safe following distance, especially in poorly lit areas. Always slow down and, if encountering hazardous sections, stop to assess the situation before proceeding.
Was this review help?
10
2
Share
LeLucas
08/12/25 8:34am
I'm a seasoned driver with over 20 years of experience, often driving on highways at night. Once on the highway, when it gets dark, you need to turn on your low beams so you can see the road 100-200 meters ahead, and others can spot your car too. If there are no other vehicles or pedestrians around, you can switch to high beams to see road signs or obstacles further away, but you must immediately switch back to low beams when you spot an oncoming car or a vehicle ahead to avoid blinding them, which is very dangerous. On highways, speeds are high, and without proper lighting, your car's reflectivity is insufficient, which can easily lead to rear-end collisions or others failing to see your lane changes. I also recommend checking if your taillights and turn signals are working properly. In bad weather, you can turn on fog lights to increase visibility. Remember, safe driving isn't just about you—proper lighting makes the road safer for everyone, especially on highways where even a slight lapse in attention can lead to serious accidents. Developing the habit of checking your lights as soon as you get in the car is crucial. My experience tells me: don't cut corners on these small but vital details.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What does AHD reversing camera mean?

AHD reversing camera refers to a high-definition reversing image system installed at the rear of the vehicle. It consists of ultrasonic sensors, a controller, a display, and a buzzer. Its function is to allow the driver to see the situation behind the vehicle on the display when reversing, avoiding accidents caused by the driver's inability to see the rear situation during reversing, thereby improving driving safety. The method to activate the reversing camera is: shift the vehicle into reverse gear, and the reversing camera will automatically turn on. The automotive reversing camera system uses a far-infrared wide-angle camera device, which can clearly display obstacles behind the vehicle on the in-car display screen.
13
5
Share

When is it not necessary to paste the car insurance sticker?

Since 2018, the car insurance sticker no longer needs to be pasted, but this does not mean that the car does not need to be insured. Additional information: 1. Relevant laws: Compulsory traffic insurance is one of the types of car insurance that must be purchased as stipulated by the state. The compulsory traffic insurance sticker must still be pasted on the car. According to the "Road Traffic Safety Law", any vehicle driving on the road without the inspection qualification sticker or compulsory traffic insurance sticker, or without carrying a driver's license or vehicle license, will be detained by the public security traffic management department in accordance with the law. The compulsory traffic insurance sticker and the motor vehicle inspection qualification sticker should be pasted in the upper right corner of the motor vehicle. Failure to paste or violation of regulations will result in a fine. 2. Notes: The environmental protection sticker for motor vehicles also does not need to be pasted. In the future, all vehicle-related inspection information can be queried in the local vehicle management database. Pickup trucks will be treated the same as family cars, and there is no need to paste insurance stickers or environmental protection stickers. The reflective strips on the rear of the vehicle also do not need to be pasted. Although these stickers do not need to be pasted, car insurance must still be purchased in accordance with regulations, which is also for the safety of the car owner. Remember to bring your driver's license and vehicle license when you go out.
3
1
Share

What are the models equipped with wet dual-clutch transmission?

Models equipped with wet dual-clutch transmission include: 2019 Haval H7, 2019 Haval H7L, Lynk & Co 01 PHEV, Tayron, T-Roc, etc. Wet dual-clutch transmission refers to a dual-clutch transmission where the clutch plates are immersed in transmission fluid. Dual-clutch transmissions are categorized into dry and wet types. Characteristics of dual-clutch transmission: 1. DSG transmission improves the vehicle's fuel economy; 2. Quick response; 3. The vehicle does not experience power interruption during acceleration, making the acceleration stronger and smoother; 4. When in manual mode, it does not upshift even if the accelerator is fully depressed unless the upshift operation is performed.
19
0
Share

What to Do If Your Car Stalls After Driving Through Water in the Rain?

The solutions for a car stalling after driving through water in the rain are: 1. Stay calm and immediately turn off the ignition switch, then disconnect the negative terminal of the battery as soon as possible to prevent electrical short circuits caused by water entering various electronic components in the car; 2. Move the vehicle to a safe location, preferably with the front higher than the rear, to allow water in the exhaust pipe to drain out and avoid damage to the catalytic converter and muffler. Reasons for a car stalling after driving through water in the rain: 1. Moisture or water ingress causing a short circuit in the high-voltage ignition system; 2. Water entering the exhaust pipe; 3. Water entering the air intake, specifically at the air filter; 4. Water entering the engine, causing damage and preventing normal operation, leading to stalling.
15
1
Share

What is the emission standard of Fengguang S560?

Fengguang S560 complies with the China V emission standard, which refers to the National Fifth Stage Emission Standard for motor vehicle pollutants. Taking the 2021 Fengguang S560 as an example, it is a compact SUV with the following dimensions: length 4560mm, width 1815mm, height 1735mm, wheelbase 2690mm, and a fuel tank capacity of 50 liters. The 2021 Fengguang S560 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It delivers a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 220Nm, paired with a 6-speed manual transmission.
18
2
Share

What transmission is equipped in the Compass?

The Compass is equipped with a 6-speed manual transmission, a 7-speed dual-clutch transmission, and a 9-speed automatic transmission. The Compass is a compact SUV under the Jeep brand. Taking the 2021 Compass as an example, its body dimensions are: length 4424mm, width 1819mm, height 1635mm, with a wheelbase of 2636mm and a curb weight of 1430kg. The 2021 Compass features a front MacPherson independent suspension and a rear multi-link independent suspension, with a maximum horsepower of 173ps, maximum power of 127kw, and maximum torque of 270nm, paired with a 7-speed dual-clutch transmission.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.