What lights should be turned on when driving a motor vehicle in foggy weather?

1 Answers
MacJeremiah
07/29/25 5:13pm
When driving a motor vehicle in foggy weather, the fog lights should be turned on. If visibility is low, the hazard warning lights should also be activated. According to relevant regulations, when driving at night without streetlights, poor lighting, or in conditions of low visibility such as fog, rain, snow, dust, or hail, motor vehicles must turn on the headlights, position lights, and tail lights. When a following vehicle is driving close to the vehicle in front in the same direction, high beams should not be used. Due to poor visibility in foggy conditions, fog lights must be turned on as they have strong penetration and can alert oncoming and following vehicles to your position. Car fog lights are installed at the front and rear of the vehicle and are used to illuminate the road and provide safety warnings during rainy or foggy weather.
Was this review help?
7
0
Share
More Forum Discussions

What are the damages to a car from removing the center console?

Vehicles that have undergone dashboard removal and installation are generally prone to issues such as abnormal noises caused by improper dashboard assembly, poor sealing, and increased noise. However, removing and installing the dashboard has little to no impact on the vehicle's handling and overall performance. Below is relevant information about the dashboard: 1. Definition: The dashboard, also known as the instrument panel, is widely used in the cabins of all vehicles and engineering machinery. It mainly consists of instruments, steering wheel, dashboard shell, dashboard frame, and dashboard wiring harness. 2. Requirements: The dashboard is the most complex interior component in passenger vehicles. From design to installation, it must go through processes such as creative styling, structural design, model making, and prototype trial assembly, all of which are indispensable.
3
3
Share

What are the differences between Mazda 3 and Axela?

Mazda 3 and Axela have the following differences: 1. Different engine displacement: The engine displacement of Axela is 1.5 liters, while that of Mazda 3 is 1.6 liters. The engine displacement of Mazda 3 is slightly higher than that of Axela. 2. Different engine power: The maximum output power of Axela's engine is 86, while that of Mazda 3's engine is 79. The engine power of Mazda 3 is slightly lower than that of Axela. 3. Different exhaust emission standards: The exhaust emission standard of Axela is China VI, while that of Mazda 3 is China IV. Therefore, the exhaust emissions of Axela are more environmentally friendly.
19
5
Share

How long will it take for problems to occur if a steel wool pad is placed in the exhaust pipe?

If a steel wool pad is stuck in the exhaust pipe and cannot be removed, the area through which air can pass will begin to decrease within a few days, leading to an increase in exhaust backpressure. Excessive exhaust backpressure can cause poor engine exhaust flow, preventing the complete expulsion of exhaust gases and reducing the intake of fresh air. This results in decreased charging efficiency of the vehicle, leading to a reduction in the engine's output power and torque, which can cause sluggish acceleration and even engine vibration. Below is a detailed introduction to this issue: 1. Introduction One: The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. 2. Introduction Two: Some vehicles are equipped with turbochargers at the exhaust pipe location to increase horsepower. To minimize exhaust resistance, the exhaust pipe outlet is typically positioned at the lower part or the rear of the vehicle.
19
5
Share

Can Vehicle Annual Inspection Be Done on Weekends?

Vehicle annual inspection can be conducted on weekends. According to Article 15 of the "Opinions on Strengthening and Improving Motor Vehicle Inspection Work": Inspection institutions shall implement an uninterrupted system on Saturdays, Sundays, and holidays, providing extended inspection services. Contents of annual inspection: Check whether the engine, chassis, body, and their accessories are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced and match the initial inspection records. Inspect whether the vehicle's braking performance, steering control, lights, exhaust, and other safety performance meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles". Check whether the vehicle has been modified, remodeled, or altered; whether the driving license, license plate, and all registrations in the vehicle file match the actual condition of the vehicle, and whether any changes have been made; whether approval and alteration procedures have been completed. Check whether the license plate, driving license, and the enlarged license plate characters printed on the vehicle are damaged, altered, or illegible, and whether replacement is needed. For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is located, as well as the maximum number of passengers allowed in the cab, are printed in Chinese imitation Song font on both sides of the door as required. For trucks, check whether the rear tailgate (including the rear tailgate of the trailer) is printed with the vehicle number enlarged 2~3 times as required; for individual or joint-venture vehicles, check whether the word "individual" is printed on both sides of the door. The characters must be clear, and unit codes or other patterns are not allowed (special cases require approval from the vehicle management office).
13
0
Share

What brand is takyee engine oil?

takyee engine oil is a brand of American Del Lubricants. Here are some precautions regarding engine oil replacement: 1. Oil selection: Choose engine oil based on the requirements of the engine. Do not use high-grade oil in lower-grade engines, nor use low-grade oil in high-grade engines. Select oil that matches the engine. 2. Viscosity selection: Choose oil with different viscosity based on the engine's operating condition. If the engine is in good condition and the seasonal temperature is low, use oil with lower viscosity; if the engine is severely worn and the seasonal temperature is high, use oil with higher viscosity. 3. Do not overfill: The oil level should be slightly below the mark on the dipstick. Do not overfill. Excessive oil not only increases the crankshaft's rotational resistance but also reduces the engine's output power. Moreover, the excess oil may enter the combustion chamber and participate in combustion, leading to oil burning, blue smoke emission, and increased fuel consumption.
14
3
Share

What causes the P000A camshaft adjustment to be too slow?

P000A camshaft adjustment being too slow is generally caused by a damaged intake adjustment valve. Below is relevant information about the Audi A4: 1. Interior and seating: The three-spoke steering wheel is a highlight, featuring thumb buttons for gear shifting, which enhances the sporty feel. Additionally, the Audi A4 offers optional luxury features typically found in C-class vehicles: the in-car navigation system on the center console can receive TV programs or adjust audio settings, while the BOSE sound system adds an artistic passion to every journey. The Audi A4 also comes with a full-size spare tire, reflecting Audi's user-centric philosophy. 2. Transmission system: In terms of powertrain, the Audi A4 3.0 comes standard with Audi's patented quattro all-wheel-drive system, providing double the traction. This system automatically, accurately, and timely distributes the ground force to each wheel during steering or braking on various complex road surfaces, thereby improving directional stability and traction under challenging driving conditions.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.