What lights should be turned on in rainy weather?

1 Answers
LukasMarie
07/29/25 10:50pm
In rainy conditions, you should turn on the headlights or fog lights. When the rain is heavy, the rainwater itself can obstruct visibility, and water on the road surface can be kicked up by the tires of the vehicle ahead, creating a mist that also significantly affects visibility. In such cases, turning on the headlights or fog lights can improve visibility. In fact, traffic regulations have specific rules regarding light usage in rainy weather: "During periods when streetlights are on at night, or when driving in conditions of low visibility such as fog, rain, snow, sandstorms, or hail, headlights, position lights, and rear lights must be turned on." Therefore, the most important aspect of driving in the rain is ensuring that other vehicles can always see you. Even if the rain is so heavy that the outline of the vehicle is unclear, the lights can still indicate the presence of a vehicle in that position, which is safer for both yourself and others. 1. Position lights (or daytime running lights): In light rain or when the rain first starts, position lights can be effective. However, if the rain becomes heavier, the illumination intensity of ordinary halogen position lights may not be sufficient. Nowadays, some models that use LED daytime running lights instead of position lights (such as the Audi A3 in the image below) have better illumination intensity and can handle heavier rain. 2. Headlights: When the rain reaches a moderate level, it is necessary to turn on the low beams, and you can also turn on the front fog lights at the same time. These two are collectively referred to as headlights. At this point, the main purpose of the headlights is not for illumination but to increase your own visibility. For example, in the image below, the vehicle in the rearview mirror has turned on the low beams and front fog lights, making it particularly noticeable in the rearview mirror.
Was this review help?
9
2
Share
More Forum Discussions

How to Adjust the Headlight Height of the Cruze?

The method to adjust the headlight height of the Cruze is as follows: 1. After turning on the high beams, stand in front of the headlights with your feet as vertical and close to the headlights as possible, observe where the light hits your feet, and note the center point of the light beam; 2. Move vertically to a wall and mark the position of the light beam center on the wall based on the position on your feet; 3. Use a screwdriver to rotate the adjustment gear of the headlight to align the light beam center with the mark on the wall. The Cruze is a compact sedan under SAIC-GM Chevrolet, with body dimensions of: length 4666mm, width 1807mm, height 1460mm, and a wheelbase of 2700mm.
4
5
Share

What are the causes of excessively high engine idle speed?

Engine idle speed being excessively high can be caused by: 1. Faults in the coolant temperature sensor, throttle position sensor, idle control valve, or fuel injector; 2. Throttle sticking or not closing properly; 3. Air leaks in the intake system. Solutions for excessively high engine idle speed include: 1. Cleaning or replacing the idle control valve and using a specialized decoder to perform a basic idle speed setting; 2. Cleaning and inspecting the fuel injector's spray volume to ensure there are no blockages or leaks; 3. Adjusting or replacing the throttle position sensor. The impacts of excessively high engine idle speed are: 1. Increased fuel consumption; 2. Damage to the clutch friction plate; 3. Increased vehicle noise.
6
5
Share

What is the normal tire pressure for an SUV?

SUV tire pressure is normal between 2.2 and 2.5 bar. The functions of tires are: 1. To serve as the medium for force transmission between the vehicle and the road surface, transmitting driving force, braking force, and steering force to achieve the vehicle's driving, braking, and steering operations; 2. To support the vehicle load, where the vehicle's load causes the tire to sink until the average pressure on the tire's contact area balances with the internal inflation pressure; 3. To reduce and absorb vibrations and impacts during driving, preventing early damage to vehicle components caused by severe vibrations; 4. To adapt to the vehicle's high-speed driving conditions, reduce driving noise, and ensure driving safety, comfort, handling stability, and fuel economy.
14
2
Share

Can small dents on the hood be repaired?

Small dents on the hood can be repaired. The repair methods are: 1. Apply toothpaste and cola evenly on the dent, wipe repeatedly, and then remove the residual toothpaste and cola; 2. Use a touch-up pen with the same color as the car paint to restore the color; 3. Apply a layer of nail polish of the same color on the scratch to prevent rust; 4. Go to a professional beauty shop for polishing and waxing. The hood is made of rubber foam and aluminum foil materials, which can reduce engine noise, isolate the heat generated by the engine during operation, and effectively protect the paint surface on the hood, preventing it from aging and cracking.
13
2
Share

What transmission does the Mercedes-Benz G500 use?

Mercedes-Benz G500 uses a 9-speed automatic transmission, also known as a torque converter transmission, which connects to the engine via a torque converter and relies on planetary gears for shifting and torque conversion. The G500 is equipped with a 4.0L twin-turbocharged engine, with a maximum power output at 5250 rpm and maximum torque available between 2000 to 4750 rpm. The G500 is a mid-to-large-sized SUV with body dimensions of 4857mm in length, 1931mm in width, 1962mm in height, a wheelbase of 2890mm, and a fuel tank capacity of 100L.
6
1
Share

What is the Chinese equivalent of the Euro 5 emission standard?

Euro 5 is equivalent to China's National 5 emission standard, which refers to regulations on the content of carbon monoxide, hydrocarbons, nitrogen oxides, and other harmful gases emitted from vehicle exhaust. Methods to check a vehicle's emission standard include: 1. Checking the motor vehicle conformity certificate; 2. Looking up the vehicle's accompanying list; 3. Logging into the motor vehicle exhaust pollution supervision and management website; 4. Inspecting the back of the environmental protection label on the car's front windshield; 5. Taking the vehicle registration form to the vehicle management office for inquiry. Solutions for vehicles failing to meet emission standards are: 1. Cleaning the throttle valve, oxygen sensor, and three-way catalytic converter; 2. Using higher-quality fuel.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.