What Lights Should Be Turned On in Rainy Weather?

1 Answers
DeRowan
07/28/25 6:36pm
When the rain is light, you should use the width indicator lights; when the rain is heavy, you should turn on the headlights or front fog lights. Also, avoid using hazard lights while driving and do not use the outline lights for extended periods. Relevant details are as follows: 1. Width Indicator Lights: The word 'width' in 'width indicator lights' literally means 'to indicate width,' serving as signal lights to alert other vehicles. 2. Front Fog Lights: Front fog lights are installed at the front of the car, usually in a bright yellow color and positioned slightly lower than the headlights. They are used to illuminate the road during rainy or foggy weather. Due to low visibility in foggy conditions, the driver's line of sight is limited. These lights can increase the driving distance, especially the strong light penetration of yellow anti-fog lights, enhancing visibility for the driver and other traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance.
Was this review help?
9
5
Share
More Forum Discussions

What does a yellow exclamation mark in Volkswagen indicate?

When a yellow exclamation mark appears on the car dashboard, it indicates one of four possible issues: general fault, automatic transmission fault, abnormal tire pressure, or lighting fault. Below is a detailed analysis of these four scenarios: General Fault: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance or components and functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a parenthesis represents the tire pressure monitoring warning light. This light illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a brake system warning, typically due to brake system failure or low brake fluid level. Immediate inspection of the brake system is necessary to avoid accidents.
9
3
Share

What is the purpose of purchasing car insurance?

Car insurance is a type of property insurance, also known as motor vehicle insurance. It refers to a commercial insurance that compensates for personal injury, death, or property damage caused by natural disasters or accidents involving motor vehicles. Below is an introduction to the roles of various types of car insurance: 1. Compulsory Traffic Insurance: This is a mandatory insurance required by the state, which compensates for the losses of third-party victims within the liability limits in the event of a traffic accident. 2. Third-Party Liability Insurance: Commonly referred to as 'Three-Party Insurance,' it compensates for the direct losses of third parties in accidents involving personal injury, death, or property damage. It serves as the strongest supplement to Compulsory Traffic Insurance in terms of coverage, with optional coverage ranging from hundreds of thousands to millions. 3. Vehicle Damage Insurance: This insurance compensates for the shortcomings of Compulsory Traffic Insurance and Third-Party Liability Insurance, which do not cover damages to the insured's own vehicle. Daily driving inevitably involves minor collisions, and without Vehicle Damage Insurance, the repair costs would have to be borne by the vehicle owner. 4. No-Deductible Insurance: Vehicle Damage Insurance and Third-Party Liability Insurance set different deductible rates based on accident liability. To minimize personal losses, vehicle owners can purchase No-Deductible Insurance as an add-on, transferring their share of the liability back to the insurance company. 5. Theft and Robbery Insurance: Comprehensive Theft and Robbery Insurance covers situations where the insured vehicle is stolen or robbed under non-intentional, non-deliberate, and non-violation circumstances. If the case remains unsolved after reporting and investigation within a certain period, the insurance company compensates for the corresponding losses.
13
3
Share

What type of engine oil is used for the Audi Q7?

Audi Q7 originally uses 0W30 - Castrol EDGE engine oil. For later maintenance and oil changes, you can choose Audi-specific engine oil, Mobil 1, or Shell synthetic oil. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high-temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it maintains viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in an Audi Q7 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick and ensure the engine oil level is within the standard range.
11
2
Share

What is the difference between brake lights and tail lights?

The differences between brake lights and tail lights are as follows: 1. Different light colors: The brake light is red; the tail light is white. 2. Different usage times: The brake light turns on when the brake is pressed; the tail light remains on continuously. 3. Different functions: The brake light effectively prevents rear-end collisions, reduces traffic accidents, and alerts following vehicles that the car is slowing down or stopping. Incorrect use or malfunction of the brake light can easily lead to rear-end collisions. The tail light mainly includes amber turn signals that indicate the direction of the car and reverse lights that assist in observation.
6
5
Share

Causes and Solutions for High Temperature in Single-Cylinder Diesel Engines

The causes of high temperature in automotive diesel engines include insufficient coolant and loose fan belts. Below are detailed explanations of the causes and corresponding solutions: 1. Insufficient Coolant: If the diesel engine's cooling system lacks coolant, it will affect the engine's heat dissipation, leading to high temperatures. Solution: Regularly check the coolant level in the radiator and expansion tank, and replenish it promptly if the level is low. 2. Loose or Faulty Fan Belt: If the cooling fan malfunctions, the motor and circuit need to be inspected and repaired. Solution: Tighten the fan belt or replace it directly.
20
3
Share

How long does it take to charge a 12v maintenance-free battery?

12v maintenance-free battery charging time is approximately 20 hours. Here is the relevant introduction about 12v maintenance-free batteries: 1. Features: Due to structural advantages, maintenance-free batteries consume very little electrolyte and basically do not require distilled water replenishment during their service life. They also feature shock resistance, high temperature resistance, compact size, and low self-discharge. The service life is generally twice that of conventional batteries. 2. Charging method: Maintenance-free batteries can also be recharged, and the charging method is basically the same as that of conventional batteries.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.