What lights should be turned on for temporary roadside parking during the night in Subject 3?

1 Answers
OBentley
07/30/25 7:27am
When a motor vehicle is temporarily parked at night, the hazard warning flashers, clearance lights, and rear position lights should be turned on. Below are some related extensions about Subject 3 lighting: 1. Situations requiring low beam headlights: Low beam headlights must be turned on when driving in areas without streetlights at night, during dusk when it is relatively dark, or at dawn when light first appears; if encountering heavy fog, snow, or heavy rain that obstructs visibility, low beam headlights must be turned on even during the day; in some road sections where there are lighting facilities but the brightness is insufficient, low beam headlights should be turned on. 2. Situations requiring high beam headlights: Roads without streetlights or with poor lighting; unfamiliar road conditions requiring the reading of signs; when overtaking another vehicle, alternating between high and low beam headlights to alert the vehicle in front to yield.
Was this review help?
4
2
Share
More Forum Discussions

What Tier Does Cadillac Belong to in the Automotive Market?

Cadillac is classified as a second-tier luxury car brand. Here are some details about Cadillac: 1. Exterior Design: The exterior design incorporates various elements. The Cadillac concept car features a convertible sports car design, with a body length exceeding 5 meters, which is quite large for a convertible. 2. Interior Design: The retro-inspired styling gives the car a high-tech feel. The three-dimensional interior design makes the Ciel appear simple yet filled with a futuristic ambiance. 3. Performance: Cadillac is equipped with a 3.6L V6 twin-turbocharged direct-injection engine and also includes a hybrid system, delivering a maximum output of 425 horsepower.
14
3
Share

How to Adjust Valve Clearance in an Engine?

Engine valve clearance adjustment method is: 1. Loosen the lock nut; 2. Select the appropriate thickness on the feeler gauge and insert it between the adjusting screw and the valve; 3. Turn the adjusting screw so that the feeler gauge can move flexibly inside; 4. Fix the adjusting screw with a screwdriver and tighten the nut with a wrench; 5. Confirm that the feeler gauge is neither too loose nor too tight. Hazards of excessive or insufficient engine valve clearance: 1. Excessive valve clearance: It will cause impact noise between the valve transmission parts and between the valve and the valve seat, and accelerate wear; 2. Reduced duration of valve opening: The cylinder charging coefficient decreases, and the exhaust is not thorough; 3. Insufficient valve clearance: When the engine is hot, the valve cannot be closed tightly, causing air leakage, resulting in reduced power and burning of the valve.
17
0
Share

In which country is the Škoda headquarters located?

Škoda's headquarters is located in Mladá Boleslav, Czech Republic, and it is one of the world's four oldest automobile manufacturers. Taking the 2020 Škoda Octavia as an example, it belongs to the compact car category with body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, a wheelbase of 2686mm, a fuel tank capacity of 51 liters, and a curb weight of 1210kg. The 2020 Škoda Octavia features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 113 PS, a maximum power of 83 kW, and a maximum torque of 145 Nm, paired with a 5-speed manual transmission.
15
4
Share

What are the differences between the second and third generation EA888?

Here is an introduction to the differences between the second and third generation EA888: 1. Different engines: The third-generation EA888 engine has made a significant change by integrating the exhaust manifold directly into the cylinder head. Due to the extremely high working temperatures of the exhaust manifold and its more complex structure, this poses a considerable challenge to the stability of the cylinder head. To address this, the cooling system within the cylinder head has been improved, with higher flow rates ensuring better heat dissipation efficiency (otherwise, the coolant in this area could even risk boiling). 2. Injection system: Volkswagen's new dual injection system not only enhances power performance but also reduces emissions (the stringent European emission standards now place significant pressure on all manufacturers). Of course, the dual injection system combined with higher direct injection pressure (increased from the previous 150Bar to 200Bar) imposes higher demands on the stability of the fuel system, which is undoubtedly a challenge for Volkswagen's engineers.
17
0
Share

How to Cancel the Maintenance Reminder on a Ford?

To cancel the maintenance reminder on a Ford, follow these steps: 1. Press the ignition switch off button while simultaneously stepping on the accelerator pedal and the brake pedal; 2. Press the ignition switch on button, and after 20 seconds, the maintenance light will flash; 3. Turn off the ignition switch and release the brake pedal and accelerator pedal to cancel the maintenance reminder. Taking the 2020 Ford Edge as an example, it is a mid-size SUV with body dimensions of: length 4878mm, width 1925mm, height 1734mm, a wheelbase of 2850mm, a fuel tank capacity of 69 liters, and a curb weight of 1850kg. The 2020 Ford Edge features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 245PS, a maximum power of 180kW, and a maximum torque of 390Nm, paired with an 8-speed automatic transmission.
7
5
Share

What is the correct parking procedure for an automatic transmission vehicle?

The correct parking procedure for an automatic transmission vehicle is: 1. Press the brake pedal to slow down and come to a complete stop; 2. After stopping, shift into N (Neutral) gear; 3. Engage the parking brake; 4. Release the foot brake and ensure the vehicle is stationary; 5. Press the foot brake again and shift into P (Park) gear; 6. Turn off the engine. Automatic transmission vehicles do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The starting procedure for an automatic transmission vehicle is: 1. Turn the ignition key to the power position; 2. Press the foot brake and shift from P (Park) to N (Neutral) gear; 3. Release the foot brake and start the engine; 4. Allow the engine to warm up while stationary; 5. Press the foot brake and shift from N (Neutral) to D (Drive) gear, then release the parking brake; 6. Gradually release the foot brake and smoothly press the accelerator to start moving.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.