What Light is the Reverse Gear?

2 Answers
LeCole
07/30/25 1:44am
Reverse gear activates the reverse lights. Here is the relevant introduction: Reverse Lights: Reverse lights do not need to be manually turned on. When the car is shifted into reverse gear, the reverse lights will automatically turn on, and they will automatically turn off when the car exits reverse gear. There is a button on the central console for reversing, which is the hazard warning light. Pressing it will automatically turn on the hazard lights to alert pedestrians. Precautions for Reversing: The speed when reversing should not be too fast. It should be done in coordination with the rearview camera and mirrors. The slower the speed, the more reaction time the driver has. You can turn on the turn signals or hazard warning lights when reversing. Try to avoid turning the steering wheel while stationary, as this increases the load on the steering system and can wear out the tires. The brake lights and reverse lights are located in the same position when reversing, both serving to alert pedestrians.
Was this review help?
18
4
Share
OBraxton
08/15/25 7:33am
The reverse light automatically turns on when the car is put into reverse gear, located at the rear of the vehicle, typically as a white bulb. This light is designed to illuminate the road behind while reversing, helping the driver see obstacles and also alerting pedestrians and other vehicles that the car is moving backward. Having driven for many years, I know the circuit for this light is quite simple: there's a switch on the transmission that closes when reverse gear is engaged, allowing current to flow from the fuse to the bulb. If the light doesn't work, it could be due to a burnt-out bulb, a blown fuse, or poor contact in the wiring. It's best to check it regularly, especially since a non-functioning reverse light at night can be dangerous, increasing the risk of collisions in poor visibility. Replacing the bulb is usually inexpensive and can be done yourself—just open the rear cover and remove the light housing. The reverse light is an essential safety feature; don't underestimate its role, as it effectively reduces the risk of accidents.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to properly turn off a keyless ignition system?

Keyless ignition utilizes radio frequency identification (RFID) technology. When the driver enters the vehicle, the onboard detection system immediately recognizes the smart card in your key fob. After verification, the vehicle's computer activates, allowing you to start the engine by simply pressing (or turning) the start button inside the cabin. The process of turning off a keyless ignition is somewhat similar to starting it. First, depress the brake pedal to bring the vehicle to a complete stop. Then, shift the gear from D (Drive) to N (Neutral), and engage the parking brake (for electronic parking brakes, simply lift the switch). Next, release the foot brake (but do not turn off the power yet) to ensure the vehicle remains stationary under the parking brake's force, preventing potential P (Park) gear lock-up. Continue holding the foot brake, shift from N to P gear, then release the foot brake. Finally, press the start/stop button to power off the vehicle, completing the shutdown process.
15
5
Share

What is the ETC system for highway tolls?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC toll collection method: Through microwave-dedicated short-range communication between the RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, the system uses networked technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles paying tolls without stopping when passing through bridge and road toll stations. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driving license must include the page with the most recent annual inspection stamp. Credit card application form, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt to a designated outlet to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old. Own a vehicle registered under personal name. Below are the precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power, but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, avoid installing it on the blackened areas of the windshield or where the solar panel might be blocked. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to an ETC service point for unlocking. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle ahead from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, resulting in failed toll deduction. When using a debit card to bind ETC, insufficient balance will also cause toll deduction to fail.
8
2
Share

Can I Buy a Car in Another Province and Register It Locally?

You can buy a car in another province and register it locally, as long as you have the purchase invoice and the vehicle qualification certificate. Here are some considerations for buying a car in another province and registering it locally: Choose a reputable 4S store: Make sure to buy from a reputable 4S store and confirm whether the store supports out-of-province car purchases. When picking up the car, inspect it carefully, as you are an out-of-province buyer, and there is a possibility of being sold a stock car or a problematic vehicle. Drive carefully on the return trip: Since the car is in its break-in period, drive cautiously on the way back, avoiding high engine RPMs, sudden acceleration, and hard braking.
8
3
Share

What are the differences between BMW 3 Series GT and 3 Series?

BMW 3 Series GT and 3 Series differ in terms of power, dimensions, and configurations. Below are the specific details of these differences: Power Differences: The BMW 3 Series is equipped with a 1.5T inline 3-cylinder turbocharged engine, delivering a maximum power of 100 kW and a maximum torque of 220 Nm. In contrast, the 3 Series GT features a 2.0T inline 4-cylinder turbocharged engine, with a maximum power of 135 kW and a maximum torque of 270 Nm. Dimension Differences: The dimensions of the BMW 3 Series are 4643mm in length, 1811mm in width, and 1454mm in height, with a wheelbase of 2810mm. The 3 Series GT measures 4824mm in length, 1828mm in width, and 1518mm in height, with a wheelbase of 2920mm. Configuration Differences: The BMW 3 Series lacks certain configurations such as rear side airbags, collision warning, automatic emergency braking, and rearview camera, which are available in the 3 Series GT. The 3 Series GT includes additional features like rear side airbags, collision warning, automatic emergency braking, and rearview camera compared to the standard 3 Series.
10
0
Share

Is Full Car Polishing Necessary?

Full car polishing is not mandatory. Here are some details about polishing: 1. Purpose: The purpose of car polishing is to restore the gloss of the paint, but it is generally not recommended for new cars, as they do not require polishing. Although polishing may thin the paint, a small amount of polishing is tolerable, as it only removes the oxidized surface layer and foreign substances. Polishing once or twice has minimal impact. 2. Frequency: New car paint is typically in excellent condition. After the initial period, if necessary, polishing should be done at most once a year. Polishing once or twice is acceptable, but excessive polishing can weaken the paint's self-maintenance ability, reduce its thickness, and even cause damage. Therefore, it is essential to control the frequency of polishing and minimize the number of times to maintain the paint's condition.
11
1
Share

How often should a car from July 2013 undergo annual inspection?

According to the new annual inspection regulations, vehicles from 2013 that underwent inspection before November 20, 2020, when the new policy took effect, need to be inspected in 2021. For those inspected after November 20, 2020, no inspection is required in 2021. Relevant details are as follows: 1. New Rules: Under the new regulations, non-operational small passenger vehicles (excluding minibuses) aged between 7 and 9 years fall under the exemption category. For non-operational small passenger vehicles (excluding minibuses) older than 6 years but less than 10 years, the annual inspection frequency is adjusted to once every two years. 2. Annual Inspection: For private cars older than 10 years, the inspection cycle remains unchanged as per the original regulations, i.e., once a year for vehicles aged between 10 and 15 years, and every six months for vehicles older than 15 years.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.