What license plate is issued for plug-in hybrid vehicles?

1 Answers
LaSimon
07/29/25 9:04pm
Plug-in hybrid vehicles are issued green license plates, which are not subject to the traffic restriction policy based on the last digit of the plate number. The primary color of these plates is green. Green license plates are divided into: 1. Small new energy vehicle plates use gradient green as the background color; 2. Large new energy vehicle plates use a combination of yellow and green as the background color. License plates refer to vehicle plates, which are panels hung on the front and rear of the vehicle, made of materials such as aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information. Plug-in hybrid vehicles are classified into: 1. Micro hybrid; 2. Mild hybrid; 3. Moderate hybrid; 4. Full hybrid.
Was this review help?
18
1
Share
More Forum Discussions

How to Slowly Release the Clutch?

Manual transmission car, find the right fulcrum, press quickly and lift gently, slowly lift the clutch, use the heel as a fulcrum, adjust the sitting posture and seat position. Finding the fulcrum: Since the clutch needs to be kept stable for a long time during driving, the left foot cannot be suspended, and a suitable heel fulcrum must be found. Press quickly and lift gently: Note that once you need to press the clutch, you must press it down quickly and then lift it gently. This can prevent the car from jerking forward and maintain a steady speed. Lifting the clutch: Once you notice the car starts moving slowly, immediately stop releasing the clutch and control the car to move slowly. Heel as the fulcrum: When the clutch is raised to about one-third of its height, use the entire heel as a fulcrum to control the clutch. This ensures the speed is slow and steady, and even if you need to control the clutch for a long time, the left foot won't feel tired or shake. Adjusting the sitting posture and seat: Everyone's height is different, so the seat position also varies. Therefore, to press the clutch steadily, the seat position must be adjusted in advance.
17
1
Share

How to Drive an Audi A6?

Audi A6 is used as follows: 1. Start the car when the gear lever is in the P position; 2. When shifting to D (drive) or R (reverse), the brake pedal must be pressed; 3. After the gear is shifted into position, release the brake and the car will start moving forward or backward; 4. Press the brake pedal when stopping; 5. For long-term parking, shift to N (neutral), release the brake, and engage the handbrake. Taking the Audi A6 2004 model as an example, its body dimensions are: length 4886mm, width 1810mm, height 1475mm, wheelbase 2850mm, minimum ground clearance 115mm, and fuel tank capacity 70l.
1
4
Share

What kind of water should be added to car windows?

Car windows should be filled with windshield washer fluid. Windshield washer fluid refers to a super-concentrated cleaning agent for car windows, which has functions such as anti-stickiness, anti-static, anti-corrosion, dustproof, cold resistance, acid rain resistance, antifreeze, and UV protection. Car windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Car windshield washer fluids are categorized into: 0°C fluid for summer use, -20°C and -35°C fluids for winter use. The method for adding windshield washer fluid to a car is: 1. Open the front hood; 2. Locate the washer fluid reservoir, open the cap, and add the fluid.
13
0
Share

What to Do When the Car's Water Temperature Is Too High?

The solution to a high car water temperature is: Do not turn off the engine, open the hood, and pour water over the radiator to quickly lower the temperature. During engine operation, the normal water temperature should be around 90 degrees. The reasons for high car water temperature include: 1. Insufficient coolant; 2. Faulty cooling fan; 3. Faulty water pump; 4. Faulty thermostat. The consequences of high car water temperature include: 1. Accelerated engine wear and reduced lubrication effectiveness of the oil; 2. Risk of radiator bursting due to excessive heat; 3. Increased engine block temperature, prolonged high temperatures can cause deformation or damage to the cylinder head and block.
5
4
Share

What to Do When a Mercedes Car Key Runs Out of Battery?

When a Mercedes car key runs out of battery, the solution is to replace the battery. The replacement method is as follows: 1. Press the button on the car remote key to remove the mechanical key; 2. Insert a tool into the hole at the back of the key and gently pry it open; 3. Open the back cover and remove the old battery for replacement. Models under the Mercedes brand include: Mercedes A-Class, Mercedes S-Class, Mercedes G-Class, Mercedes C-Class, Maybach, etc. Taking the Mercedes C-Class as an example, its body dimensions are: length 4784mm, width 1810mm, height 1457mm, wheelbase 2920mm, fuel tank capacity 66l, and it is equipped with a 1.5T turbocharged engine.
17
0
Share

Where is the battery located in the Mercedes-Benz R350?

The battery of the Mercedes-Benz R350 is located under the front passenger seat. The functions of the battery are: 1. When the generator is overloaded, it can assist the generator in supplying power to electrical equipment; 2. When the generator is not generating electricity or the voltage is low, it supplies power to electrical equipment; 3. It can convert part of the electrical energy into chemical energy for storage. The Mercedes-Benz R350 is a mid-to-large-sized MPV with body dimensions of: length 5157mm, width 1922mm, height 1674mm, wheelbase 3215mm, and a fuel tank capacity of 80 liters. It is equipped with a 3.5L naturally aspirated engine with a maximum power output of 200kW.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.