What license plate does a hybrid electric vehicle use?

2 Answers
SanRemington
07/24/25 6:23am
Hybrid electric vehicles can be registered with new energy vehicle license plates, which are green plates. More information about new energy vehicle license plates is as follows: 1. New energy vehicle license plates are divided into small new energy vehicle license plates and large new energy vehicle license plates. The dimensions of new energy vehicle license plates are 480mm×140mm. Small new energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates have a yellow-green dual-tone color scheme. 2. New energy vehicle license plates embody the concept of "green environmental protection," with green as the main color tone. They include special identifiers and utilize new anti-counterfeiting technologies and manufacturing processes, enabling both differentiated management and easy identification, while also highlighting the characteristics of new energy and technological innovation.
Was this review help?
18
2
Share
CodyLynn
08/11/25 2:09am
I've been driving for several years, and my car is a Toyota hybrid with a blue license plate because it doesn't require external charging. It has a small battery and mainly relies on the gasoline engine to generate electricity for driving. For plug-in hybrid models, like those from BYD or Geely, they come with green license plates. Green plates offer many benefits, such as exemption from license plate lotteries and traffic restrictions in cities with driving limits, as well as savings on purchase taxes. Before buying a car, make sure to check the vehicle model and manual carefully, as hybrid cars can be confusing—some people mistakenly assume all hybrids have green plates. Driving a blue-plate hybrid offers low daily fuel consumption and is cost-effective, but don’t expect policy benefits. It’s advisable to confirm the license plate type during regular maintenance to avoid issues during annual inspections. Overall, understanding the distinction between plate colors can make your car selection process much easier.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What is the ground clearance of the Vision X6?

The ground clearance of the Vision X6 is 200mm. A higher ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain, but it raises the center of gravity, reducing stability. Conversely, a lower ground clearance weakens the vehicle's ability to traverse obstacles or rough surfaces, but it lowers the center of gravity, thereby improving stability. Below is relevant information about automotive ground clearance: 1. The ground clearance of a car should not be less than 140mm, as severe urban traffic congestion requires special design considerations for engine cooling; otherwise, it may easily lead to overheating. Most European passenger cars have a ground clearance between 100mm and 140mm, while most Japanese and Korean passenger cars range between 140mm and 180mm. Generally, off-road vehicles have a ground clearance between 180mm and 220mm. 2. A lower car ground clearance means the vehicle is closer to the ground. The most obvious benefit of a low ground clearance is greater stability at high speeds. During driving, the car is affected by wind resistance. The lower the ground clearance, the smaller the gap between the car and the ground, causing airflow at high speeds to mainly pass over the top of the car. The pressure generated by the airflow on top can push the car toward the ground, enhancing tire grip and making the drive more stable. 3. A high ground clearance offers good passability, allowing the vehicle to adapt to most road conditions, which is the greatest advantage of high-clearance vehicles. With a high ground clearance and greater distance from the ground, there is less concern about damage from stones or rough road surfaces to the undercarriage.
6
2
Share

Do I still need to collect the annual inspection sticker for a 7-year-old car?

Any vehicle is required to collect the annual inspection sticker after passing the inspection. Below are the relevant details: Introduction: Any vehicle must obtain the annual inspection sticker after the inspection, even if it does not require an on-site inspection. Vehicles eligible for the 6-year exemption only need to collect the inspection pass sticker once every 2 years. Over the entire 6-year exemption period, the sticker needs to be collected a total of 3 times: the first time is when the new vehicle is registered, at which point the vehicle license and inspection pass sticker are issued; the second time is when the vehicle reaches 2 years of registration, and the third time is when it reaches 4 years of registration. Notes: It is important to note that when the vehicle reaches 6 years of registration, it must undergo an on-site inspection in that same month. The motor vehicle inspection regulations stipulate that only after passing the inspection can the vehicle be driven on the road, so inspections or sticker collections must be completed before the inspection cycle begins.
10
5
Share

What Causes the Vehicle Body to Touch the Line During Parallel Parking?

The vehicle body's projection has already crossed the line, which is considered as touching the line in the driving test. Below is an introduction to Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test subject. Small vehicle Subject 2 test items: include five mandatory tests—reverse parking into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving (commonly known as S-curve) (some regions also have a sixth item—highway toll card collection). Large vehicle Subject 2 test items: include stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, turning at a right angle, passing a limited-width gate, passing continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) weather, slippery roads, and emergency handling.
11
5
Share

What are the brands of refrigerated trucks?

There are many brands of refrigerated trucks, including Changan, Foton, Yuejin, Dongfeng, Sinotruk, Jiangling, Qingling, Shacman, etc. Additional information: Refrigerated truck: A refrigerated truck refers to an enclosed van-type transport vehicle used to maintain the temperature of frozen or fresh goods. It is equipped with a refrigeration unit and a polyurethane insulated compartment, making it a specialized transport vehicle for refrigeration. Refrigerated trucks can be classified by manufacturer, chassis load capacity, and compartment type. Refrigerated transport: Refrigerated trucks are commonly used to transport frozen foods (freezer trucks), dairy products (dairy transport vehicles), vegetables and fruits (fresh goods transport vehicles), vaccines and medicines (vaccine transport vehicles), etc.
13
1
Share

Where are the low beam and high beam lights on the Mercedes-Benz GLC?

The low beam and high beam light switch of the Mercedes-Benz GLC is controlled by the light control knob on the left side of the driver's seat. Here are introductions to other lights: 1. The turn signal is controlled by the light control lever on the left side of the steering wheel. In the light control area on the left side of the steering wheel, simply rotate the knob at the top of the light control lever to switch between different light modes, but this operation needs to be performed with the ignition on. 2. Method to turn on the high beam: first turn the light knob to the low beam position, then push the light control lever forward to turn on the high beam. 3. Instant high beam function: when you need to warn the other party, you can pull the light control lever backward to activate the high-low beam alternating function. At this time, the high beam indicator light can be seen on the dashboard.
19
3
Share

How to Cancel Driving Test Registration?

Driving test candidates can cancel their registration either through the official online booking system of the driving test center or by contacting their driving school. To cancel the driving school records, it is important to note that regulations may vary by region. Many driving schools can assist students with the cancellation process, eliminating the need for personal attendance. However, in other regions, personal presence at the site is often required. The applicant must bring their original ID card, or the original driving school agent can bring the student's original ID card to the vehicle management office to submit a written cancellation request. Article 38 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulates that applicants who are learning to drive on the training ground or on the road must obtain a driving learning certificate in accordance with the regulations. The validity period of the driving learning certificate is three years, and applicants must complete the subject two and subject three tests within this period. Those who fail to complete the tests within the validity period will have their previously passed subjects invalidated.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.