···
Log in / Register

What license does an A2 driver's license downgrade to at age 60?

4 Answers
Alyssa
08/28/25 7:45am

What C license does an A2 driver's license downgrade to at age 60. Below are relevant details: Regulations: Drivers holding A2 licenses aged 60 or above must undergo automatic downgrade procedures. License holders need to bring their original A2 driver's license, ID card, medical examination report, etc. to the local vehicle management office or relevant authorities to exchange for a C license. Replacement: To voluntarily downgrade from A2 to C1, drivers need to provide their ID card and original driver's license, and fill out an application form at the vehicle management office. Those aged 60 or above are no longer permitted to drive large buses, tractor units, city buses, medium-sized buses, large trucks, trolleybuses, or trams.

Was this review help?
18
1
Share
KateDella
09/10/25 5:57am

I've always been quite familiar with driving regulations. When a holder of an A2 driver's license reaches the age of 60, the license will automatically be downgraded to a C1 license. This is because as people age, their reflexes may not be as sharp as before, and driving large buses poses higher risks. After the downgrade, they can safely drive smaller cars. I recommend preparing your ID card, photos, and medical examination report in advance and going to the vehicle management office to get a new license. It only costs a few dozen yuan. Safety is the top priority, and this policy is quite considerate. It allows you to continue taking your family out, ensuring everyone stays safe and sound.

Was this review help?
15
0
Share
Expand All
KyleMarie
10/24/25 6:48am

Having driven for decades, I've seen many friends downgrade their driver's licenses at 60, switching directly from an A2 license to a C1 license. The process is straightforward. Just bring the necessary documents to the DMV, fill out a form, and it's done without much time wasted. After the downgrade, you can still drive a car for daily commuting, relieving the pressure of driving large vehicles and making life easier. I also want to say, this is a common change, so don't worry about it disrupting your daily routine—just maintain a positive attitude.

Was this review help?
17
0
Share
Expand All
VanGianna
12/07/25 7:12am

At the age of 60, an A2 driver's license will be downgraded to a C1 license, allowing the holder to drive small cars. This is based on safety considerations, as advanced age may not be suitable for operating large vehicles. It is necessary to promptly visit the vehicle management office to replace the license to avoid violations. The process includes submitting documents and undergoing a medical examination.

Was this review help?
12
0
Share
Expand All
More Forum Discussions

Do Uneven Brake Discs Need Resurfacing?

Brake discs will experience wear during use. If the wear is uneven, it can lead to an uneven surface on the brake disc, where some areas are higher and others lower. This can cause brake shudder, affecting braking performance. If the unevenness of the brake disc impacts braking, it is necessary to remove the brake disc for resurfacing or replace it entirely. Below is an introduction to brake pad resurfacing: 1. Resurfacing can address most issues with brake pads and discs, such as burrs, scratches, grooves, and other uneven conditions. 2. Generally, if there is brake noise or issues with the brake pads, resurfacing can help. Its purpose is to improve the coordination between the brake pads and discs, ensuring the proper functioning of the braking system and restoring normal braking performance. However, the resurfacing force should not be excessive, and the number of resurfacing sessions should be limited. Excessive resurfacing can thin the brake disc, posing safety risks and reducing its effectiveness and lifespan.
19
2
Share

How to open the audio equalizer for BYD Song?

You can adjust the bass value to 8-9, the midrange value to 2-3, and the treble value to 5-6. The left-right balance can be adjusted to the middle position, and the front-rear balance can also be adjusted to the middle position. Here is some extended information about the BYD Song audio system: 1. When adjusting the car audio, you can first turn off the midrange and treble of the front and rear channels, listen to the subwoofer separately, adjust the crossover through the sound, control the proportion of mechanical noise and subwoofer well, reduce the volume of the rear channel, and then test the subwoofer. 2. For car audio, the crossover point of the subwoofer is set between 80Hz-100Hz, and the crossover point of the midrange and treble speakers in the high-pass section is about 60Hz-90Hz.
8
4
Share

How to use the Mondeo electronic parking brake?

Mondeo is equipped with an electronic parking brake, located on the right side of the driver. There is a switch: pulling it down engages the parking brake, while pushing it up releases the parking brake. Below are some extended details about the electronic parking brake: 1. The car's electronic parking brake is an Electronic Parking Brake system, abbreviated as EPB. The button symbol on the vehicle is "P", and its working principle is the same as the traditional mechanical handbrake, both achieving parking brake control through the friction generated between the brake disc and brake pads. 2. Currently, the electronic parking brake technology applied in cars is mainly the caliper-integrated electronic parking brake system. This system replaces the traditional parking brake handle, mechanical levers, and cables with electronic buttons and motor components.
17
1
Share

How to Deal with Small Rust Spots on White Car Paint?

Methods for Removing Rust from Car Surface: 1. Manual Treatment: Use tools such as scrapers, steel brushes, sandpaper, and broken hacksaw blades to manually knock, scrape, brush, and sand to remove rust. 2. Mechanical Rust Removal: Utilize electric or pneumatic tools to achieve rust removal. Common electric tools include electric brushes and electric grinders, while pneumatic tools include pneumatic brushes. Electric and pneumatic brushes use specially designed circular steel brushes that rotate to clean rust or oxide scales through impact and friction. Electric grinders use high-speed rotation of the grinding wheel to remove rust spots, which is particularly effective for deeper rust spots, offering high efficiency and good construction quality. 3. Flame Treatment: Use a gas welding torch to heat deep rust spots that are difficult to remove manually until they turn red. The high temperature alters the chemical composition of the rust oxides, achieving rust removal. 4. Chemical Treatment: Apply acidic solutions to the rusted areas of the metal, allowing them to react chemically with the rust (metal oxides) to form salts that detach from the metal surface, thereby removing the rust.
18
4
Share

What is the normal valve clearance for the Crown?

The valve clearance for the Crown is 0.25mm for the intake valve and 0.30mm for the exhaust valve. The function of the car valve is to specifically input air into the engine and discharge the exhaust gas after combustion. The symptoms of car valve damage are as follows: 1. It affects the working efficiency of the engine, and the car's power will decrease; 2. Abnormal noise will be generated, the engine will experience unstable idling or poor acceleration during operation, and the overtaking performance will also decrease. In severe cases, it will also cause difficulty in starting the engine, resulting in failure to ignite, air leakage, or increased carbon deposits; 3. It leads to unstable cylinder operation. Unstable cylinders will cause the engine to shake, the engine to work weakly, and the exhaust pipe to become blocked, which may result in black smoke from the exhaust in severe cases.
19
5
Share

How to Adjust Mirrors for Subject 2?

Subject 2 exam vehicle rearview mirror adjustment method: 1. After getting in the car, adjust the seat and backrest to maintain a normal driving posture, then start adjusting the rearview mirrors. 2. The rearview mirror adjustment buttons are located on the inner side of the front doors and can be adjusted in four directions: up, down, forward, and backward. 3. Left rearview mirror adjustment method. Maintain an upright sitting posture. For left-right adjustment, make the car body occupy one-third of the left rearview mirror surface. For up-down adjustment, position the rear door handle to appear near the upper edge of the left rearview mirror surface, allowing you to see the left rear wheel of the car. 4. Right rearview mirror adjustment method. Similarly, maintain an upright sitting posture. For left-right adjustment, make the car body occupy one-third of the right rearview mirror surface. For up-down adjustment, position the rear door handle to appear near the upper edge of the left rearview mirror surface.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.