What level of SUV is the BMW X1?

2 Answers
MacIsaac
09/03/25 4:53am
The BMW X1 is classified as a compact SUV. Taking the 2021 BMW X1 as an example, it belongs to the compact SUV category with the following body dimensions: length 4565mm, width 1821mm, height 1620mm, wheelbase 2780mm, front track 1561mm, rear track 1565mm, fuel tank capacity 61 liters, and luggage compartment capacity 505 liters. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, maximum power of 103kW, and maximum torque of 220Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
10
1
Share
Verona
09/15/25 6:28am
As a parent who frequently drives in the city to pick up and drop off kids, I find the BMW X1 to be a compact luxury SUV. It's one size smaller than the X3, measuring about 4.5 meters in length, making it particularly agile—turning in crowded neighborhoods is effortless, and parking spots are a breeze. The interior space is practical, with comfortable front seats. Although the rear isn't super spacious, it fits two child seats plus a large backpack without issue, and the trunk is sufficient for shopping bags and small luggage. Under the hood, it typically comes with a 2.0T engine, offering fuel efficiency comparable to sedans, even on long trips. Market-wise, it competes with the Audi Q3 and Mercedes-Benz GLA in the same segment, starting at a reasonable price of around 300,000 RMB—an entry-level luxury option with great value. The driving experience retains BMW's sporty DNA, with precise steering and stable handling at high speeds. Maintenance-wise, it's reliable, with routine service costs that aren't excessive. Overall, it's a great fit for buyers like me who balance family needs with a touch of style.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What are the differences between Cadillac ATS and XTS?

The main differences between ATS and XTS lie in their positioning. Below are the detailed differences between Cadillac ATS and XTS: 1. Difference one: Engine layout. The Cadillac ATS-L adopts a front-engine, rear-wheel-drive layout, while the XTS uses a front-engine, front-wheel-drive layout. 2. Difference two: Engine power. Both are equipped with a 2.0T engine, but the ATS-L has a maximum power output of 205KW and a maximum torque of 400N·m, whereas the XTS has a maximum power of 198KW and a maximum torque of 353N·m. 3. Difference three: Transmission. The ATS-L is equipped with an 8AT transmission, while the XTS comes with a 6AT transmission. 4. Difference four: Exterior and interior design. Since the ATS-L has not been updated after the 2017 model, its design style is relatively older, whereas the XTS features Cadillac's latest design language.
6
2
Share

What materials can 308 welding wire weld?

308 is a Cr19Ni10 stainless steel welding rod with titanium-type flux coating, suitable for both AC and DC welding. During welding, the flux coating exhibits characteristics of not turning red or cracking, and the weld metal possesses excellent mechanical properties and resistance to intergranular corrosion, making it particularly suitable for flat welding of thin plates. Additional information: 1. Z308 welding rod: Z308 is a cast iron welding rod with pure nickel core and strongly reducing graphite-type flux coating, generally used for repairing cast iron thin parts and machined surfaces, such as engine mounts, machine tool guide rails, gear seats, and other important gray cast iron components. 2. E308 welding rod: E308 is a stainless steel welding rod, belonging to the chromium-nickel stainless steel welding rod category, used for welding stainless steel materials. The stainless steel welding rod is a titanium-type flux-coated Cr19Ni10 stainless steel welding rod that can be used with both AC and DC. During welding, the flux coating does not turn red or crack, and the weld metal exhibits good mechanical properties and resistance to intergranular corrosion, making it particularly suitable for flat welding of thin plates.
18
4
Share

What is the difference between 22-cylinder and 30-cylinder?

The difference between 22-cylinder and 30-cylinder car air pumps lies in their inflation speed. The 30-cylinder model inflates faster than the 22-cylinder one. Slower inflation speeds make it more difficult to inflate larger vehicles. Details are as follows: Working principle of car air pumps: Car air pumps operate by drawing power from external or built-in batteries to run the motor. The motor generates power to draw in surrounding air, creating air pressure that opens the valve of the connecting device. The air pressure then enters the air cylinder. When inflating tires, the air pressure in the cylinder flows through the outlet hose into the tire's valve, using the pressure to open the valve core rubber ring and allow air to enter the tire. Requirements for selecting an air pump: Consider the power rating. Small cars can opt for low-power air pumps, which are cheaper and more energy-efficient. For accurate inflation data, precision is crucial. High-quality tire pressure gauges typically feature an embedded, integrated design to prevent impact and loosening that could affect measurement accuracy.
17
4
Share

What are the five driving modes of the GLC?

Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz. The five driving modes of the GLC are: 1. E (Eco) Mode: Its function is to save fuel and energy, but the vehicle's power will be reduced, making it feel sluggish. The transmission always shifts to the highest gear as soon as possible, allowing 6th gear cruising at 60 km/h. 2. C (Comfort) Mode: This is the most commonly used mode. In this mode, balanced comfort is the GLC's greatest performance, offering a calm, smooth, and unhurried drive. The steering is light and precise, especially at low speeds. 3. S (Sport) Mode: In this mode, the transmission keeps the engine RPM above 2500, and the steering wheel immediately feels much tighter. 4. S+ (Sport+) Mode: Sport+ is more aggressive than Sport mode. 5. IN (Individual) Mode: Allows customization of powertrain and steering settings, such as combining Eco mode power with Sport mode steering.
16
2
Share

Can the front and rear fog lights be turned on together?

The front and rear fog lights can indeed be turned on simultaneously. On the lighting control switch, when you turn the switch to the rear fog light position, both the front and rear fog lights will activate. Fog lights do not have a glare shield, and their light has strong penetration in foggy conditions. Therefore, in extremely poor visibility weather, it is essential to turn on the fog lights—both to alert and warn oncoming vehicles and pedestrians and to make it easier for vehicles behind to spot your car. Fog lights should not be used as regular daytime running lights. Due to their high penetration, fog lights should not be turned on unnecessarily, as they can significantly interfere with the driver's vision. Fog lights also have a minor utility: when driving on rough, uneven roads at night, high beams and low beams often fail to illuminate the road ahead clearly. In such cases, turning on the front fog lights can provide additional illumination. Of course, once the road conditions return to normal or when an oncoming vehicle approaches, the fog lights should be turned off promptly.
4
0
Share

What is the function of the coupler and draft gear?

The function of the coupler and draft gear: To mitigate the longitudinal impacts and vibrations caused by changes in locomotive traction force during operation, or collisions between vehicles during starting, braking, and shunting operations. The draft gear has the capability to dissipate impacts and vibrations between vehicles, thereby reducing damage to the vehicle structure and loaded cargo. The working principle of the draft gear involves using compressed elastic elements to cushion the impact force, while friction and damping during the deformation of the elastic elements absorb the impact energy. The coupler and draft gear is a vehicle component used to connect vehicles with each other, locomotives, or multiple units, transmitting traction force, braking force, and mitigating longitudinal impact force. It consists of the coupler, draft gear, coupler yoke, follower plate, etc., forming an integrated unit installed in the draft sill at the end of the underframe. This ensures safe and reliable vehicle coupling and interchangeability of the coupler and draft gear installation. Types of draft gears: Based on their structural characteristics and working principles, draft gears can generally be classified into: friction draft gears, rubber draft gears, and hydraulic draft gears.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.