What level of car does the Tiida belong to?

What are the methods for car tire maintenance?

Methods for car tire maintenance include: 1. Regularly clean out stones stuck in the tire treads; 2. Avoid exposing tires to direct sunlight; 3. Frequently check tire pressure—refer to the normal tire pressure values listed on the inside of the fuel tank cap and adjust accordingly; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Choose smooth roads while driving, avoiding objects that could puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires. The functions of tires are to support the entire weight of the vehicle, transmit traction and braking torque, prevent vibration and damage to car components, and ensure driving safety.

19

3

Share

What are the common locations for car oil leaks?

Common locations for car oil leaks: 1. Oil filter leakage; 2. Valve cover leakage; 3. Engine timing cover leakage; 4. Engine oil pan leakage; 5. Crankshaft oil seal leakage. Causes of car oil leaks: 1. Fastening nuts not tightened properly or overtightened; 2. Oil pan drain plug not tightened or damaged; 3. Improper oil seal installation with misaligned shaft neck and seal edge; 4. Drain plug gasket not replaced for extended periods; 5. Aging seals on oil cooler or filter base causing poor sealing; 6. Use of low-quality oil filters; 7. Excessive transmission fluid; 8. Poor sealing of oil cooler.

8

2

Share

What do the numbers and letters on car tires represent?

The numbers and letters on car tires represent the following meanings: 1. Section width: The increased width of the tire and its contact area with the ground enhances grip and improves braking performance; 2. Aspect ratio: The ratio of the tire's section height to its section width; 3. Radial tire and rim diameter: Common tires are denoted by 'R', indicating a radial tire, where the internal cord fabric is arranged at a 90-degree angle to the tire's centerline, resembling the meridians on a globe; 4. Load index: A numerical value representing the maximum load capacity, indicating the maximum weight the tire can bear under normal inflation conditions; 5. Speed rating: The maximum speed at which the tire can carry a specified load under defined conditions.

19

2

Share

What Are the Specifications of Car Tires?

Car tire specifications include: 155/65R13, 75/70R14, 185/60R15, 205/40R16, 225/45R17, 265/30R19, 255/40R18, 295/30R20. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to car components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy-saving economy.

20

5

Share

What Are the Reasons for Difficult Cold Starting of a Car?

The reasons for difficult cold starting of a car are: 1. Weak or aging battery; 2. Restricted fuel flow; 3. Poor performance of the ignition system; 4. Valve sticking or carbon buildup; 5. Frozen exhaust pipe; 6. Poor atomization of the air-fuel mixture inside the engine; 7. Aging spark plugs. Solutions for difficult cold starting of a car: 1. Push-starting the car; 2. Jump-starting with cables, ensuring positive connects to positive and negative to negative; 3. Timely battery recharge; 4. Replacing with suitable engine oil; 5. Timely replacement of spark plugs; 6. Periodic cleaning of the electronic throttle; 7. Adding antifreeze.

11

3

Share

What is the method for cleaning a car condenser?

The method for cleaning a car condenser is as follows: 1. Open the engine hood and unscrew the fixing screws of the front grille; 2. Remove the front grille; 3. Use a toothbrush or a brush to clean the condenser from top to bottom; 4. Assemble the water gun and hose, check that the installation is secure, then turn on the faucet and clean the condenser from top to bottom. The car condenser consists of pipes and cooling fins, and its function is to dissipate heat and cool the high-temperature, high-pressure refrigerant vapor discharged by the compressor, causing it to condense into a high-pressure liquid refrigerant. The working principle of the condenser: the refrigerant enters the evaporator, the pressure decreases, changing from a high-pressure gas to a low-pressure gas. This process absorbs heat, lowering the surface temperature of the evaporator, and the fan blows out cold air.

1

2

Share

What level of car does the Tiida belong to?

What are the methods for car tire maintenance?

What are the common locations for car oil leaks?

What do the numbers and letters on car tires represent?

What Are the Specifications of Car Tires?

What Are the Reasons for Difficult Cold Starting of a Car?

What is the method for cleaning a car condenser?

What is the function of automotive urea?

What Are the Solutions When a Car Door Lock Won't Open?

What are the reasons for black smoke coming from a car?

How to distinguish the front and back of car tires?