What level of car does the Mercedes-Benz AMG belong to?

What is the Emission Standard of the Chevrolet Cavalier?

The Chevrolet Cavalier complies with the China VI emission standard. It is a compact car. Taking the 2020 Chevrolet Cavalier as an example, its body dimensions are: length 4474mm, width 1730mm, height 1471mm, wheelbase 2600mm, minimum ground clearance 150mm, and curb weight 1120kg. The 2020 Chevrolet Cavalier features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, maximum torque of 180Nm, and maximum power of 92kW. It is paired with a 6-speed automatic transmission.

18

2

Share

What Are the Reasons for High Transmission RPM?

The reasons for high transmission RPM are: 1. Clutch slippage; 2. Prolonged failure to change transmission fluid; 3. Damage to hydraulic components inside the transmission. Methods for maintaining an automotive transmission: 1. Replace automatic transmission fluid every 12 months or 20,000 kilometers; 2. Avoid coasting in neutral; 3. Regularly check fluid levels; 4. Avoid skipping gears when upshifting; 5. Do not forcibly shift into neutral; 6. Do not shorten warm-up idling time; 7. Prevent gear grinding during engagement; 8. Clean the transmission; 9. Avoid driving immediately after cold starts without warming up; 10. Perform regular automatic transmission maintenance. The functions of a transmission are: 1. Alter gear ratios to expand the torque and RPM range of driving wheels, enabling optimal engine operation; 2. Allow reverse driving while maintaining the engine's rotational direction; 3. Utilize neutral to interrupt power transmission, facilitating engine startup, idling, gear shifting, or power output.

2

5

Share

What is the function of the front and rear oxygen sensors?

The functions of the front and rear oxygen sensors are: 1. The front oxygen sensor detects the oxygen content in the exhaust; 2. The rear oxygen sensor checks whether the three-way catalytic converter is functioning properly. The working principle of the front oxygen sensor is: The front oxygen sensor can detect the oxygen content in the exhaust and then feed the signal back to the ECU. Based on this signal, the ECU can adjust the air-fuel ratio of the engine. The working principle of the rear oxygen sensor is: The rear oxygen sensor feeds the signal back to the ECU, and the ECU compares the data from the front and rear oxygen sensors. If the data from both sensors is the same, it indicates that the three-way catalytic converter is damaged.

12

2

Share

What are the damages to the car if not warming it up?

Not warming up the car can cause the following damages: engine wear, as the engine oil settles at the bottom when the car is cold, leaving the engine internals in a state of dry friction. The method to warm up the car is: after starting the vehicle, let it idle for 1 to 2 minutes, allowing the engine coolant temperature to reach normal levels before driving. The benefits of warming up the car are: 1. After prolonged parking, the engine oil flows back into the oil pan, leaving the upper part of the engine lacking lubrication. Warming up helps to lubricate these parts; 2. When the engine hasn't reached its operating temperature, the fuel system, still cold, cannot effectively vaporize gasoline completely. Warming up improves efficiency; 3. It helps distribute the transmission gear oil to lubricate the upper part of the transmission.

12

2

Share

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

Wheel balancing and four-wheel alignment differ in their fundamental purposes: wheel balancing is performed on the wheels, while four-wheel alignment adjusts the length and position of various suspension components. The steps for wheel balancing are: 1. Remove the center cap of the wheel hub, install the balancing machine for measurement, and input the data; 2. Measure the width of the wheel rim and input the data; 3. Based on the data calculated by the computer, add appropriate balancing weights to the inner and outer sides of the wheel rim, and retest until the standard is met. The steps for four-wheel alignment are: 1. Connect the power and turn on the machine; 2. Attach the target to the wheel with the target facing the camera; 3. Click into the measurement program on the computer interface; 4. Open the camera to confirm if the target is positioned correctly, adjusting it if necessary; 5. Click to measure and follow the prompts to obtain the measurement data; 6. Adjust the total front toe data of the vehicle to the green standard range.

13

5

Share

What Causes the Lack of Power in Acceleration for the Old Mondeo?

Reasons for the lack of power in acceleration for the old Mondeo are as follows: 1. Check the fuel supply system: Replace the fuel filter and clean the fuel injectors, as they affect the engine's fuel supply requirements. 2. Check the electrical system: Whether the spark plug's electrode gap is too large, leading to slow sparking frequency and affecting the engine's combustion quality. Replacement is recommended. 3. Check the intake system: Whether the air filter is dirty, if the vacuum tubes are aged or leaking, and clean the throttle body, as these can affect the air intake volume. 4. Check the exhaust system: Whether the catalytic converter is clogged, affecting the exhaust flow. Cleaning or replacement is recommended.

3

2

Share

What level of car does the Mercedes-Benz AMG belong to?

What is the Emission Standard of the Chevrolet Cavalier?

What Are the Reasons for High Transmission RPM?

What is the function of the front and rear oxygen sensors?

What are the damages to the car if not warming it up?

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

What Causes the Lack of Power in Acceleration for the Old Mondeo?

What is bestune?

Where are Lynk & Co cars produced?

Are the engines of the Camry and Lexus ES the same?

What are the causes of new car shaking?