What level of car does the Lynk & Co 05 belong to?

1 Answers
ReedLee
07/30/25 2:16am
Lynk & Co 05 is a compact crossover SUV. Extended content is as follows: 1. Body dimensions: The length, width, and height of this car are 4592 mm, 1879 mm, and 1628 mm respectively, with a wheelbase of 2734 mm. It is a five-door, five-seat SUV model, and this car is equipped with a 2.0-liter turbocharged engine across the entire lineup. 2. Power parameters: The maximum power of this engine is 187 kW, with a maximum power speed of 5500 rpm, and a maximum torque of 350 Nm, with a maximum torque speed range of 1800 to 4800 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. 3. Suspension: The Lynk & Co 05 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension can improve the car's handling and ride comfort. It also enhances the wheel's grip.
Was this review help?
13
0
Share
More Forum Discussions

Where is the reference point for right-angle turns located on the door handle?

During the right-angle turn test, you should turn the steering wheel when the door handle and that edge are parallel. Relevant information about the road test is as follows: 1. Introduction 1: The road test is a subject of the driver's license examination, where the examinee actually drives the vehicle under the supervision of the examiner, navigating various road conditions. 2. Introduction 2: The road test on safe and civilized driving knowledge includes safe driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. The deduction points for right-angle turns are as follows: 1. Crossing the line: If the body is not adjusted to maintain a 30 cm distance from the right sideline, it is easier to cross the line during the turn. Additionally, whether in right-angle turns or S-turns, slow speed is key. If the speed is too fast and the steering is not timely, it can lead to crossing the line. 2. Lights: During the turn, the left turn signal must be activated. Forgetting to turn it on or off is the most common mistake made by students. Many students mistakenly switch the left turn signal to the right turn signal when turning it off, which is also a noteworthy issue.
18
0
Share

What gear should be engaged when running the air conditioner for a long time while parked?

If you need to run the air conditioner for an extended period while parked, it is best to engage the P (Park) gear. The P gear is the parking gear, where the transmission's parking mechanism locks the vehicle, preventing it from rolling. Alternatively, you can also use the N (Neutral) gear, but since N is the neutral position, the transmission is not under load, and the vehicle can move. In this case, be sure to engage the parking brake (handbrake) to prevent the vehicle from rolling. Below are the functions of a car's air conditioning system: 1. Temperature regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the cabin temperature; in winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize residual heat for warming. 2. Humidity regulation: Humidity significantly affects passenger comfort. The cabin humidity should generally be maintained between 30% and 70%. Standard car air conditioning systems do not regulate humidity; only ventilation systems or advanced luxury cars with integrated heating and cooling systems can adjust humidity. 3. Airflow regulation: The speed and direction of airflow greatly impact comfort. If air is blowing directly, the speed should be limited to a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environment, age, health, and temperature preferences. 4. Air purification: Cabin air quality is crucial for comfort.
17
1
Share

How many days does it take to receive a notification for traffic violation photos?

Generally, SMS notifications for traffic violation photos are received within 3 to 7 days, with a maximum of around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is confirmed as a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners typically do not receive an immediate violation notification via SMS. There is usually a delay, and the duration can vary. After an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police personnel for verification. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, vehicle owners must visit the traffic police department at the location of the violation within one month before the vehicle's annual inspection. If a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received within 15 days, it is likely that no violation was recorded. Methods for querying traffic violations: Traffic violation queries refer to checking motor vehicle violations of traffic management rules through online platforms or query terminals. Methods include terminal queries at traffic police branches, traffic violation websites, phone queries, and mobile app queries. Website query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone query: Dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance location. For on-the-spot violations, such as those directly caught by a traffic officer, they must be processed at the violation location. Mobile app query: Open the "Traffic Management 12123" app, select "violation query," and clear any unresolved violations.
6
0
Share

Reasons for Friction Noise When Braking?

Friction noise when braking is commonly caused by issues such as noise in new cars, brake disc and pad noise, or sudden braking noise. Noise when braking in new cars: The brake pads and discs of new cars have not yet fully worn in, so they may sometimes produce a "squeaking" friction sound, which is normal. After some use, the noise will naturally disappear. Noise after replacing brake pads: After installing new brake pads, incorrect installation can cause noise. Common installation errors include installing the brake pads upside down, with the metal side touching the brake disc, resulting in braking noise. Noise due to brake disc issues: Prolonged use can cause deep grooves on the brake disc surface or deep steps at the edges. Uneven contact between the brake pads and the disc can produce noise. In such cases, the brake disc needs to be replaced or polished using a brake disc resurfacing machine. Noise from sand in the brake disc: If foreign objects like sand or small stones get between the brake pads and disc while driving, the brakes may produce a sharp hissing sound. Continuing to drive normally will usually dislodge the sand or stones, eliminating the noise. If the noise persists, the wheel may need to be removed to extract the debris. Noise during sudden braking: When braking suddenly, if you hear a noise and feel vibrations in the brake pedal, this is a normal phenomenon caused by the activation of the ABS system.
8
5
Share

Can the in-car dash cam pick up sounds inside the vehicle?

Can the in-car dash cam pick up sounds inside the vehicle? The answer is yes, because dash cams are capable of recording audio. A dash cam is an instrument that records images, sounds, and other relevant information during vehicle operation. The recording function can be enabled in the settings of the dash cam. Below are the functions of a dash cam: 1. Protecting the legal rights of drivers: In cases involving pedestrians, bicycles, or motorcycles crossing the road, it can help drivers avoid extortion by providing solid evidence. 2. Facilitating the determination of accident liability: In the event of an accident, replaying the recorded footage makes it clear who is at fault, allowing traffic police to handle the situation quickly and accurately. It also enables vehicles to be removed from the scene promptly, helping to restore traffic flow while preserving crucial evidence. This contributes to a safe and smooth traffic environment and ensures fairness. 3. Serving as a deterrent to reduce accident rates: With a dash cam installed, drivers are less likely to engage in reckless driving, significantly lowering the incidence of accidents. Even if an accident occurs, the dash cam can capture relevant information about the involved vehicles, greatly reducing hit-and-run cases. 4. Providing evidence for insurance claims: In cases where compensation for traffic accident damages needs to be determined by court rulings, the dash cam can offer evidence, leading to more accurate sentencing and compensation. 5. Effectively preventing fraud: When encountering professional fraudsters or road robbers, the dash cam can record the scene of the incident and the appearance of the perpetrators, providing key evidence for solving the case. 6. Documenting life experiences: Many car owners enjoy road trips and use dash cams to record their journeys—whether smooth and scenic or rough and muddy—all of which make for memorable experiences.
20
3
Share

Why is my application for the Subject 1 exam still under review?

When applying for the Subject 1 exam online, the reservation status typically shows whether it was successful or not within 24 hours. If the reservation page continues to display "under review," it indicates that the reservation was unsuccessful, and you need to cancel and reapply. Below is an introduction to the driving test subjects: 1. Subject 1: The exam on road traffic safety laws, regulations, and related knowledge. The structure of the exam question bank and the basic question types are determined by the Ministry of Public Security, while provincial traffic management departments under the public security authorities establish the exam question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. 2. Subject 2: The field driving skills test, which includes: reversing into a parking space, stopping and starting on a slope, turning at a right angle, driving along a curve, and parallel parking. In cities like Shanghai, Subject 2 consists of nine mandatory items: reversing into a parking space, turning at a right angle, parallel parking, driving through a tunnel, stopping to take a card, driving along a curve, making a U-turn on a narrow road, emergency stopping, and stopping and starting on a slope. 3. Subject 3: The road driving skills test, which includes basic items such as: preparing to drive (walking around the vehicle counterclockwise, fastening the seat belt, turning on the left turn signal, shifting gears, releasing the handbrake, and honking the horn), starting, driving straight, changing lanes, passing through intersections, pulling over, passing through pedestrian crosswalks, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. 4. Subject 4: Safe and civilized driving knowledge, which tests related knowledge on safe and civilized driving.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.