What level is the Hongqi H7?

1 Answers
KateLee
07/29/25 2:44pm
Hongqi H7 is a large and medium-sized car, with exterior dimensions of 5095 mm in length, 1875 mm in width, and 1485 mm in height, a wheelbase of 2970 mm, a minimum ground clearance of 142 mm, a fuel tank capacity of 70 liters, and a curb weight of 1800 kg. The Hongqi H7 is equipped with a 1.8L turbocharged engine, with a maximum horsepower of 188 hp, a maximum power of 138 kW, a maximum power speed of 5500 rpm, a maximum torque of 260 Nm, a maximum torque speed range of 2000 to 4500 rpm, and uses multi-point electronic fuel injection.
Was this review help?
11
5
Share
More Forum Discussions

How to Repair Scratches on Wheel Rims?

Methods for repairing scratches on wheel rims: 1. Clean the wheel hub: Use paint thinner to wipe around the scratches to remove dirt. For the deepest parts of the scratches where dirt is hard to remove, use a toothpick to clean thoroughly. 2. Apply touch-up paint: Prepare the brush tip neatly, apply the touch-up paint, and after the paint dries and slightly shrinks, it's best to apply it slightly raised. 3. Apply soapy water: After letting it dry completely for about a week, use waterproof paper dipped in soapy water to smooth the surface. Then use a compound to polish it to a shine, followed by waxing.
18
3
Share

How many points are deducted for the front of the car touching the line in Subject 2?

Touching the line with the front of the car results in a deduction of 100 points because it indicates that the vehicle body has crossed the line. In the Subject 2 exam, crossing the line with the vehicle body deducts 100 points, resulting in a failed exam. In addition to the vehicle body crossing the line, failing to park properly in reverse, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time will also deduct 100 points. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The exam is considered passed under the following conditions: ① For applicants of large buses, trailers, city buses, medium buses, and large trucks, a score of 90 points or above is required; ② For other vehicle types, a score of 80 points or above is required. If the Subject 2 exam is failed, one retake is allowed on the spot. If the retake is not taken or is still failed, the exam is terminated, and the applicant must reschedule the exam after ten days. Within the validity period of the driving skill test permit, the number of exam retakes for Subject 2 and Subject 3 road driving skills tests must not exceed five. If the fifth retake is still failed, the results of other previously passed subjects will be voided.
12
2
Share

What is the fuel consumption of a manual Sagitar?

The vehicle's combined fuel consumption per 100 kilometers is 5.5L. The above figure is the NEDC combined fuel consumption, which represents the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, approximately around 6.5L. Specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of around 1.2 tons has a fuel consumption of about 7.5 liters (calculated under full load conditions), while an SUV weighing around 1.5 tons has a fuel consumption of 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag coefficients increase fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, leading to reduced fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point for fuel efficiency. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Typically, small-displacement cars reach this point at around 70 km/h, while larger-displacement cars achieve it at about 100 km/h. Staying within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at red lights can increase fuel consumption.
14
0
Share

How to Check if the Driver's License Has Been Issued?

Driver's licenses are generally issued on-site and require personal signature for collection. Relevant information: 1. Definition: The full name of a driver's license is the motor vehicle driver's license, also known as a "driving license," which is a certificate required by law for motor vehicle drivers. 2. Expansion: Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive arbitrarily. Generally, individuals cannot drive on the road without a license. However, for those who have already mastered safe driving techniques, the document that permits them to drive on the road is the "driver's license." This indicates that a driver's license is a type of "permit."
18
3
Share

Is Replacing the Front Bumper Beam Considered a Major Accident?

Repairing or replacing the bumper beam does not constitute a major accident. Below is an introduction to the definition of an accident vehicle: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear and tear, resulting in a decline in mechanical performance and economic value. Generally, accident vehicles are those with structural damage. Additionally, flood-damaged cars and fire-damaged cars also fall under the category of special accident vehicles. Here is an introduction to the function of the automotive bumper beam: 1. Evenly distributing force: When a vehicle is involved in a collision, the front bumper beam can distribute the energy generated from any form of offset or frontal collision as evenly as possible between the two energy-absorbing brackets, allowing the energy to be absorbed to the maximum extent by the energy-absorbing brackets and evenly transmitting the collision force to other energy-absorbing parts. 2. Protecting components: During low-speed rear-end collisions in urban areas, the front bumper beam plays a certain role in protecting components such as the fenders, radiator, hood, and lights. The rear bumper beam can reduce damage to areas such as the luggage compartment, tailgate, and rear light assembly.
12
3
Share

Why Does the Car Steering Wheel Always Pull to One Side?

The following is a related introduction to car steering wheel pulling to one side: 1. Check the front tire pressure: Check whether the front tire pressure is consistent. If one side is too low, it should be inflated. 2. Check the low leaf spring: If the tire pressure on both sides is equal, but when viewed from the front to the back, one side is high and the other side is low, check whether the leaf spring on the low side is broken. If it is not broken, the spring is too soft or lacks sufficient curvature and should be replaced. 3. Touch the brake drum by hand: After driving a certain distance, touch the brake drum by hand. If any individual brake drum is hot to the touch, it indicates that the wheel brake is dragging and should be adjusted. 4. Touch the brake drum by hand: If the pulling phenomenon still occurs after the above checks, check whether the front axle and frame are deformed and whether the front wheel alignment is out of specification. If necessary, correct the deformation.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.