What level is the Bora?

2 Answers
DiBentley
07/24/25 5:35am
The Bora is a compact-level vehicle with dimensions of 4663mm in length, 1815mm in width, and 1462mm in height, and a wheelbase of 2688mm. It is equipped with a 5-speed manual transmission, reaching a top speed of 190 km/h. The body type is a 4-door, 5-seater sedan with a fuel tank capacity of 50L and a trunk capacity of 506L. The Bora uses a 1.5L L4 naturally aspirated engine, delivering a maximum horsepower of 113 hp and a maximum torque of 145 Nm, with a front-wheel-drive configuration. The front suspension features a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The tire specification is 195/65R15.
Was this review help?
8
2
Share
VonKira
08/11/25 1:15am
As a father who drives frequently, I've always felt that the Bora is well-suited for family life. It's a compact sedan under the Volkswagen brand, positioned as an entry-level family car with a reasonable space layout. The back seat comfortably fits two children without feeling cramped, and the trunk space is sufficient for weekend getaway luggage. Its fuel consumption is satisfying, averaging around 6 liters per 100 kilometers, making stop-and-go city driving less of a concern for fuel costs. Safety features are comprehensive, with standard ABS, airbags, and electronic stability control, giving peace of mind when driving the kids around. Maintenance costs are also reasonable, with routine servicing costing just a few hundred yuan, and the 4S shop services are reliable. In daily use, the Bora offers a stable and comfortable driving experience—nothing too flashy but practical and dependable. In short, for an average family, this car offers great value for money and is a thoughtful travel companion.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Handle Traffic Violations When Borrowing a Friend's Car?

If you commit a traffic violation while borrowing a friend's car, you need to bring the vehicle's registration certificate, your own driver's license, and ID card to the traffic management office to handle the violation. The following is an introduction to electronic violations: 1. Introduction: Generally refers to traffic violations, where motor vehicle drivers, non-motor vehicle drivers, or pedestrians violate road traffic safety laws and traffic management regulations. In addition, violations can also refer to handling matters contrary to conventional rules. 2. Regulations: Violations refer to motor vehicle drivers, non-motor vehicle drivers, and pedestrians violating road traffic safety laws and traffic management regulations. 3. Classification: Generally, there are two main types of traffic violation fines. One is on-the-spot violation tickets. The other is electronic violation records. On-the-spot violation tickets are usually issued by traffic law enforcement officers who gather evidence at the scene and issue a penalty decision.
4
4
Share

What engine is used in the Nissan NV200?

Nissan NV200 is equipped with an HR16DE engine, which is a 1.6-liter naturally aspirated four-cylinder engine. This engine has a maximum power output of 91kW and a maximum torque of 153Nm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a CVT transmission. The Nissan NV200 is a commercial vehicle based on a sedan platform, available in three variants: a 5-seat commercial version with dual-row seating, a 7-seat commercial version with triple-row seating, and a 7-seat passenger version with triple-row seating. The vehicle measures 4400mm in length, 1695mm in width, and 1847mm in height, with a wheelbase of 2725mm. It features a MacPherson independent front suspension and a leaf spring non-independent rear suspension, which enhances its load-carrying capacity.
3
1
Share

What Does Automatic Dual Clutch Mean?

Automatic dual clutch refers to the dual-clutch transmission. The dual-clutch transmission combines the flexibility of a manual transmission with the comfort of an automatic transmission, while also providing uninterrupted power output. Traditional manual transmissions use a single clutch. When shifting gears, the driver must press the clutch pedal to engage different gears, resulting in a power interruption during gear changes, which causes intermittent power output. This design aims to avoid the power interruption issue during gear shifts in traditional manual transmissions, achieving the goal of rapid gear shifting. Simply put, a dual-clutch system consists of two sets of clutches working simultaneously—one set manages the odd-numbered gears, while the other manages the even-numbered gears. The dual-clutch transmission differs from conventional automatic transmission systems; it is based on a manual transmission yet belongs to the automatic transmission category. It is a transmission mechanism capable of both transmitting and cutting off power. Its primary functions are to ensure smooth vehicle starts, reduce the impact load on transmission gears during gear shifts, and prevent overload in the drivetrain.
10
2
Share

What are the two raised lines on the front of the car called?

In fact, these two lines are the 'ribs' of the panel, called panel reinforcement ribs. As the name suggests, they are used to increase the strength of the engine hood steel plate. Without these two 'ribs,' pressing on the steel plate might cause it to deform under pressure. With these reinforcement ribs, the steel plate is less likely to deform when pressed. Essentially, they serve as an anti-pressure device. Passenger car engine hoods typically have two raised lines with the following functions: 1. Even force distribution: They help maintain uniform force distribution across the hood panel after bending, keeping the hood shape intact. 2. Enhanced aesthetics: They fulfill visual design requirements, making the entire car body more aesthetically pleasing. 3. Driving assistance: They assist drivers in judging and controlling the distance and position of the road edges while driving (primarily because during driving school training, these raised lines are used as reference points for distance and orientation).
9
4
Share

What is the fuel consumption of the new Yuexiang?

The fuel consumption of the new Yuexiang is as follows: Combined cycle fuel consumption: 6.0L/100km; Urban cycle fuel consumption: 9.3L/100km; Suburban cycle fuel consumption: 6.3L/100km. Possible reasons for high fuel consumption are as follows: 1. Vehicle malfunction: Leading to reduced efficiency, such as insufficient cylinder pressure, ignition failure, or fuel system issues. Please return to the dealership for inspection and repair. 2. Insufficient tire pressure: Regularly check tire conditions and maintain proper tire pressure, which not only saves fuel but also extends tire life. 3. Brake drag: Perform a slow neutral coasting test to ensure the brakes are not dragging. 4. Short-distance usage: If the workplace is very close to home, the engine may not reach normal operating temperature before arriving at the destination. Since a cold engine is less efficient, most of the fuel is consumed in heating the engine and coolant, making high fuel consumption unavoidable. This type of driving condition can also lead to engine carbon buildup.
6
1
Share

Can All-Terrain Tires Be Used as Snow Tires?

All-terrain tires cannot be used as snow tires. If your area experiences heavy snowfall in winter, it is recommended to use dedicated snow tires. Tires are the components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. Tires come in different designs, each with distinct purposes and performance characteristics. All-terrain tires feature a more rugged tread design with slightly larger gaps between the tread blocks compared to highway tires. This design has the downside of reduced highway performance and increased noise, but it offers better durability and traction on unpaved surfaces, making them a compromise between off-road and highway performance. Snow tires, on the other hand, are specifically designed for use in snowy conditions, enhancing the vehicle's mobility and safety on icy and snowy roads. The tread of snow tires uses a special silica-based compound that remains exceptionally soft at extremely low temperatures, maintaining excellent grip on ice. Additionally, the tread pattern often employs a cross-Z siping technology, which improves braking performance on snow and ice, shortens braking distances, and provides optimal traction.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.