What level does the Roewe RX3 belong to?

1 Answers
VioletFitz
07/30/25 9:24am
Roewe RX3 is a compact SUV. It is equipped with two types of engines: a 1.6L naturally aspirated engine and a 1.3L turbocharged engine. The 1.6L naturally aspirated engine is paired with either a 5-speed manual transmission or a CVT transmission, while the 1.3L turbocharged engine is matched with a 6AT transmission. The front suspension of the Roewe RX3 uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension. The dimensions of the Roewe RX3 are 4408mm in length, 1804mm in width, and 1651mm in height, with a wheelbase of 2625mm.
Was this review help?
8
5
Share
More Forum Discussions

Is the handbrake engaged when pulled up or down?

Pulling the handbrake up engages the brake, while pushing it down releases the brake. Introduction to the handbrake: The professional term for the handbrake is auxiliary brake. Unlike the main braking system, it uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. A return spring is also used in conjunction with the handbrake. Using the handbrake at high speeds: At high speeds, the handbrake cannot replace the foot brake. If the driver pulls the handbrake while driving at high speed, it can easily cause the rear wheels to lock up, the cable to snap, leading to vehicle skidding or even rollover. Similarly, during sharp turns or when driving on rainy, snowy, or icy roads, sudden use of the handbrake should be avoided as it can cause the ABS system to fail, with the rear wheels losing all rotation signals, making the vehicle prone to deviation and fishtailing.
11
1
Share

Should the Brake Be Pressed or Released When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, the brake should be released. During gear shifting, the clutch and accelerator must be coordinated properly. Fully depress the clutch, then release the accelerator pedal, and quickly shift to the appropriate gear. Master the Correct Hand Position: Many drivers often neglect the correct hand position for gear shifting, sometimes casually using two or three fingers to flick the gear lever, which is neither standardized nor safe. The correct hand position for shifting is to cover the gear lever head with the palm facing downward and grip it firmly before shifting. Driving Precautions: Avoid driving in low gear for extended periods: If driving at low speeds for a long time, the speed is low but the engine RPM is high, resulting in fewer miles covered per unit of time and relatively increased fuel consumption. Therefore, it is recommended to shift up to the appropriate gear as soon as possible after starting the vehicle, unless it is a cold start in low temperatures. Generally speaking, higher gears are more fuel-efficient than lower gears.
1
3
Share

What is the difference between Audi Q2 and Q2L?

Audi Q2 and Q2L have the following differences: 1. Different design styles: The exhaust pipe of the Audi Q2 adopts a single-sided single-outlet design; the exhaust pipe of the Audi Q2L adopts a single-sided dual-outlet chrome design. 2. Different engines: The Audi Q2 is equipped with a 1.0TFSI three-cylinder and a 2.0TFSI four-cylinder engine; the Audi Q2L is equipped with a 1.4TFSI engine. 3. Different dimensions: The Audi Q2 has a length, width, and height of 4191mm, 1794mm, and 1508mm respectively, with a wheelbase of 2601mm; the Audi Q2L has a length, width, and height of 4236mm, 1785mm, and 1548mm respectively, with a wheelbase of 2628mm.
8
1
Share

How to Determine the Thickness of Car Brake Pads?

Brake pad thickness can be visually inspected by looking through the wheel hub gaps. If the brake pads have worn down to one-third of their standard thickness, they should be replaced as soon as possible. Here is more information about brake pads: 1. The standard thickness of brake pads is generally around 1.5cm. As the car undergoes braking operations during use, friction will gradually reduce their thickness. The critical thickness point for brake pads is typically around 2-3 millimeters. If the brake pad thickness is less than 3mm, replacement is mandatory. 2. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking performance is decisively determined by the condition of the brake pads.
12
5
Share

How to Turn on the Air Conditioning in a Volkswagen Passat?

First, turn on the fan and then press the A/C switch (the light will illuminate). Adjust the temperature to the desired level (blue indicates cooling). If it's an automatic air conditioning system, press the AUTO button, and the air conditioning will start working automatically. First, turn on the fan and then press the A/C switch (the light will illuminate). Adjust the temperature to the desired level. Below is some related information about the Volkswagen Passat: 1. The Passat is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in Volkswagen's lineup. Since its debut in 1973, the Volkswagen Passat has swept the global automotive market with its high safety standards, classic design, and top-tier manufacturing quality, selling over 20 million units in more than 40 years. 2. The Passat surpasses the standard design of mid-range sedans in terms of power performance, overall design, safety concepts, driving and riding comfort, as well as durability and longevity. Volkswagen AG's engineers have perfectly combined automotive design and technology to create the Passat, a car with superior value, winning the affection of countless consumers. Currently, the main manufacturer selling the Passat in China is SAIC Volkswagen.
4
2
Share

How often should a Volkswagen Lavida be serviced?

Volkswagen Lavida's maintenance interval is determined by the type of engine oil used, with different oil types requiring different change intervals. Here are the specific details: 1. Mineral oil change interval is 5,000 kilometers or 3 months. 2. Semi-synthetic oil change interval is 7,500 kilometers or 6 months. 3. Full-synthetic oil change interval is 10,000 kilometers or 1 year. 4. The actual interval may vary depending on the vehicle's driving conditions. Proper daily maintenance and care of the vehicle are essential for driving safety, and maintaining good vehicle condition is a guarantee of driving safety. Regular maintenance is necessary to achieve optimal performance.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.