What level does the Excelle GT belong to?

Does washing a car with seawater cause damage?

Washing a car with seawater can cause damage: Due to the high salt content in seawater, it chemically reacts with iron, accelerating oxidation and having strong corrosive properties, which can significantly harm the vehicle's exterior. If the car's exterior quality is poor, rust spots can appear in a short time. Below are some precautions for car washing: 1. Washing frequency: Under normal circumstances, washing the car once every 1-2 weeks is considered standard. 2. Wash as needed: Since each car is parked in different environments, some cars, aside from road driving, are mostly parked in underground garages and may remain clean for up to a month in good weather. Many vehicles parked outdoors typically accumulate a layer of dust within two weeks. Therefore, the washing frequency varies depending on the vehicle. 3. Detergents and washing tools: First, ensure the detergent used is neutral, as acidic or alkaline detergents can be somewhat corrosive to the car paint. For washing tools, especially the towels used on the car body, it's essential to use specialized pure cotton car-washing towels to avoid scratching the paint. 4. Wash after rain: Given the current environmental pollution, rainwater often contains acidic substances, so it's advisable to clean the car promptly. If there are stains or mud on the car, it's also recommended to wash them off as soon as possible to prevent corrosion and oxidation of the paint. 5. Regular paint maintenance: Maintenance treatments for the car paint surface generally include waxing and glazing. Between the two, glazing offers slightly better results than waxing, lasts longer, and is also more expensive.

3

4

Share

Does switching from long-term use of 95-octane gasoline to 92-octane have any impact?

Switching from long-term use of 95-octane gasoline to 92-octane does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles recommended for low-octane gasoline, accidentally using high-octane gasoline will not cause damage. However, the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in a noticeable drop in performance. For vehicles recommended for high-octane gasoline, using low-octane gasoline can cause engine knocking. Because the octane number is significantly lower, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the suitable gasoline grade. High-compression engines can be tuned to use low-octane gasoline due to factors like ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane.

10

5

Share

Which one is the Prado between Land Cruiser and Prado?

Prado is the Prado, while Land Cruiser is the Land Cruiser. The dimensions of the Prado are: length 4840mm, width 1885mm, height 1890mm, with a wheelbase of 2790mm, a fuel tank capacity of 87 liters, a minimum ground clearance of 190mm, and a curb weight of 2285kg. The Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280ps, a maximum power of 206kW, and a maximum torque of 365Nm, paired with a 6-speed automatic transmission.

17

4

Share

Where is the tire pressure reset button for Mazda CX4?

The tire pressure reset button for Mazda CX4 is located in the central control display. The usage method is as follows: 1. Turn on the ignition switch, press the 'car' button, and the screen will display the maintenance cycle; 2. Press the 'back' button to return, then the screen will show vehicle maintenance and inspection. Use the knob to select the tire pressure monitoring system; 3. Rotate the knob to select the 'store now' option; 4. Press the confirm button, and a prompt indicating tire pressure storage will appear. The Mazda CX4 has a body length, width, and height of 4637mm, 1855mm, and 1524mm respectively, with a wheelbase of 2700mm, a fuel tank capacity of 45 liters, a minimum ground clearance of 206mm, and a body weight of 1493kg.

16

5

Share

Where is the production location of Lynk & Co?

Lynk & Co's production location is in Zhangjiakou. The models under Lynk & Co include: Lynk & Co 01, Lynk & Co 02, Lynk & Co 03, Lynk & Co 06, Lynk & Co Lite, Lynk & Co 07, etc. Taking the 2021 Pure Lite Lynk & Co as an example, its body dimensions are: 4639mm in length, 1840mm in width, 1472mm in height, with a wheelbase of 2730mm, a minimum ground clearance of 169mm, and a body weight of 1395kg. The 2021 Pure Lite Lynk & Co features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 69ps, a maximum power of 156kw, a maximum torque of 245nm, and is paired with a 6-speed manual transmission.

7

0

Share

What should be paid attention to when following a car?

When following a car, you should pay attention to: 1. The speed of the car in front: During driving, closely monitor the speed of the car in front and adjust the following distance in time; 2. The type of the car in front: When the car in front is a large bus or truck, and the following car is a small or mini car, the large vehicle ahead will block the view, making it impossible to judge the road conditions ahead, so a larger following distance is required; 3. Road conditions: Different roads have different braking distances. If the road surface has a small friction coefficient, the following distance should be increased; 4. Weather impact: When following a car in rain or snow, the slippery road surface will increase the unsafe braking zone, so the following distance should also be increased.

8

2

Share

What level does the Excelle GT belong to?

Does washing a car with seawater cause damage?

Does switching from long-term use of 95-octane gasoline to 92-octane have any impact?

Which one is the Prado between Land Cruiser and Prado?

Where is the tire pressure reset button for Mazda CX4?

Where is the production location of Lynk & Co?

What should be paid attention to when following a car?

What are the methods for car air conditioning maintenance?

What is the difference between AGM and EFB batteries?

What are the pros and cons of car color-changing film?

Does the Honda XRV belong to GAC or Dongfeng?