What Letter Represents the Drive Gear?

1 Answers
DelJace
07/30/25 6:26am
Automatic transmission forward gear is D. Here is more relevant information: 1. Precautions for driving an automatic transmission vehicle: (1) When the gear lever is in the P or N position, the key cannot start the car. (2) When shifting to D (Drive) or R (Reverse), the brake pedal must be pressed; otherwise, the gear cannot be shifted. (3) After shifting to the desired gear, releasing the brake will cause the car to start moving forward, and then you can accelerate. 2. L gear is the low forward gear: When going downhill or descending a long slope, shifting to this gear limits the car to the lowest gear automatically, allowing the engine to assist in braking. This prevents the danger of overheating brake pads from prolonged braking.
Was this review help?
7
4
Share
More Forum Discussions

Where is the headlight control module located in the Mercedes ML350?

The headlight control module in the Mercedes ML350 is located beneath the engine, near the steering axle of the chassis. Function of the headlight control module: It acts like a miniature computer, an integrated circuit. The driver's control switch signals are processed by the module, which then commands the car's headlights to perform the corresponding actions, such as switching the corresponding bulbs. Reasons why car headlights may not work: If all lights fail to turn on when the switch is activated, or if all lights in a specific switch position do not illuminate, possible causes include an open circuit or grounding issue in the power line before the light switch; a tripped or blown fuse in the circuit; poor contact or failure to close at the bimetallic strip contacts of the light switch; or the switch itself may be damaged.
1
1
Share

Does 84 Disinfectant Affect Car Paint?

84 disinfectant does affect car paint. 84 disinfectant has strong oxidizing properties and is highly corrosive to metals. Car paint is a protective film sprayed onto automobiles, serving as a type of coating that helps prevent the body from corroding easily. Methods for maintaining car paint include: Promptly remove dust from the vehicle body to minimize the adsorption of dust caused by static electricity on the car surface. Rinse off rain stains with clean water immediately after rainfall; when wiping, follow the direction of water flow from top to bottom. Cover the vehicle with a car cover and park it in a garage or on a flat surface away from direct sunlight to prevent damage to the car paint.
15
4
Share

How many questions are there in the motorcycle test?

50 questions, each worth 2 points, totaling 100 points. A score of 90 or above is required to pass. Subject 1 rules: 50 questions, each worth 2 points, with a test duration of 45 minutes. The maximum score is 100 points. After completing the test with a passing score, sign to confirm the result. Subject 2 rules: The test site has several iron poles placed 3 meters apart. The motorcycle must be driven in an S-shape through the poles back and forth once, without crossing the boundary lines or stepping on the ground with the foot during the ride. After completing the test with a passing score, sign to confirm the result. Subject 3 rules: Identification of various road signs, traffic police hand signals, and handling methods for various situations encountered while riding a motorcycle. After completing the test with a passing score, sign to confirm the result.
3
0
Share

How many times does the Audi A6 key light flash when pressed once?

The Audi A6 key light flashes once when pressed. If it flashes slowly three times, it indicates that the key is out of the sensing range and the car is already locked. If it flashes quickly three times, it means the vehicle is not locked properly. Hidden functions of the Audi A6 key: Press and hold the unlock button, and all four windows will roll down together; press and hold the lock button, and all four windows will roll up together. However, this function is not enabled by default and needs to be set in the multimedia system under driving assistance before it can be used. Reasons why the car key does not start: A common reason is insufficient battery power in the car key, in which case the battery needs to be replaced. If there is no response when pressing the key near an airport or radio transmitter, try moving the vehicle away from these areas and try again, as it is likely due to signal interference affecting the car key's control. Additionally, if there is no reaction when inserting the key to start, it is best to check the starter relay, starter fuse, and other components before trying again.
10
1
Share

What are the precautions for a new car?

Here are some precautions for a new car: Check the vehicle documents: Purchase invoice; vehicle certificate; three-guarantee service card; vehicle user manual; check the nameplate: verify the displacement, manufacturing date, chassis number, engine number, etc. on the nameplate. The numbers on the certificate must match the engine number and chassis number on the car. Interior inspection: Check the cleanliness of all areas inside the car. There should be no dirt, especially in corners and other areas; the seat surfaces should be clean and intact, and they should be comfortable to sit on without feeling any foreign objects inside that might affect comfort; check if all parts of the center console are complete, if the buttons are reliable, and if the surfaces are clean without scratches or stains. If there are sun visors and vanity mirrors, check them as well; inspect the cleanliness of every storage space inside the car and the reliability of opening and closing them.
16
1
Share

Why Does the Motorcycle Foot Peg Get Stuck?

The motorcycle foot peg may get stuck due to engine seizure from overheating or damage to other internal engine components. Engine seizure from overheating: Piston rings and engine cylinder walls can experience catastrophic failure. Lack of engine oil lubrication causes excessive cylinder heat, melting the piston rings and fusing them with the cylinder wall. This requires replacement of the cylinder kit for resolution. Damage to other engine components: 1. Generator coil failure - Loose rotor fasteners may cause the rotor and stator to become jammed by the screws, preventing rotation and engine starting. Solution: Replace generator coils and fasteners. 2. Clutch disintegration - Excessive clutch wear thins the housing, leading to breakage. The broken pieces can jam the crankshaft, preventing engine operation. Solution: Replace the complete clutch assembly.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.