What letter represents China VI?

1 Answers
GiaLee
07/29/25 11:59pm
China VI is represented by the letter VI. China VI refers to the National Sixth Stage Emission Standards for Motor Vehicle Pollutants. Methods to check China VI compliance include: 1. The vehicle's environmental protection compliance label; 2. The page in the vehicle conformity certificate where the numbering begins; 3. Estimating the vehicle's emission standard based on its manufacturing year; 4. Using the original or a copy of the motor vehicle registration certificate to inquire at the local vehicle management office. China VI standards were established to prevent environmental pollution from exhaust emissions of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The emission standards for China VI are: 1. Carbon monoxide emission content of 700mg; 2. Non-methane hydrocarbon emission content of 68mg; 3. Nitrogen oxide emission content of 60mg; 4. Particulate matter emission content of 4.5mg.
Was this review help?
6
0
Share
More Forum Discussions

What is the matching method for the new Santana remote control?

Santana remote control matching method is as follows: 1. Take out the Santana remote control key and press the metal button on the top of the remote to extend the mechanical key. 2. Go to the Santana driver's door and locate the mechanical keyhole cover on the right side of the door handle. Insert the mechanical key into the small rectangular hole below the cover to pry it open. 3. Press the unlock button on the remote control, and within 60 seconds, insert the mechanical key into the lock hole, turn it one full rotation to the left, pull the door handle, and open the door. 4. Enter the Santana vehicle, insert the mechanical key into the ignition start keyhole, turn the key one full rotation to the right to start the vehicle. This completes the entire process of matching the Santana remote control key.
8
2
Share

How to Start the CHR?

The starting procedure for the CHR is as follows: 1. For the Toyota CHR, the starting steps are to press the brake, shift to N gear, ignite, shift to D gear, and release the brake to start. 2. For models equipped with a one-key start function, the starting steps are to first press the start button, wait for the ACC light to turn on, and after the vehicle completes self-inspection, press the brake and press the start button again to start the vehicle. Below is a brief introduction to the Toyota CHR: 1. The front face of the Toyota C-HR features the new-generation Toyota style, with headlights spanning a large distance directly from the grille emblem to the A-pillar, creating a striking visual impact. The front bumper is designed with tooth-like decorations on both sides, with a sealed internal structure. The front bumper uses a diamond-patterned grille mesh, showcasing a good sense of layering. LED daytime running lights are standard across all models, while LED headlights are equipped in the luxury version and above, with other models using halogen lights. 2. In terms of interior, the Toyota C-HR appears very composed, with the most eye-catching feature being the "skyward" central control display screen, which, along with some function buttons below, is designed to lean toward the driver's side. Most of the central control area is wrapped in soft materials, offering good texture, and the black lacquer panel running across the front enhances the visual effect.
5
4
Share

How to Locate a Car?

There are several methods available for car positioning: 1. Cars with built-in GPS: Some vehicles come with built-in GPS positioning services in their navigation systems at the time of production. For such cars, simply clarify with the dealer at the time of purchase, download the corresponding app on your phone, complete the registration as required, and you can track your car's location in real-time. 2. Install a GPS tracker in the car: By installing a GPS tracker, vehicle information can be linked to the owner's mobile phone. The owner can not only check the vehicle's location and historical driving routes in real-time but also receive timely alarm alerts in case of abnormalities such as speeding, vibration, or theft. 3. Install a GPS dash cam. 4. Utilize a discarded mobile phone for positioning.
19
4
Share

What is the actual fuel consumption of the Baojun 510?

Baojun 510 fuel consumption is 6.2-6.6L/100km. The following is a related introduction about the Baojun 510: 1. Exterior features: In terms of styling design, the Baojun 510 adopts a very distinctive split headlight design, with LED daytime running lights connected to the front grille, which is quite large, while the headlights are positioned on either side of the grille. The rear of the vehicle features conventional halogen tail lights. 2. Configuration: The Baojun 510 is equipped with an 8-inch LCD capacitive touchscreen, along with practical and convenient features such as keyless entry + one-button start, automatic climate control, leather-wrapped steering wheel, cruise control, and power-adjustable/folding/heated exterior rearview mirrors.
1
5
Share

What is the crozz car?

crozz is a Volkswagen car. Here is the relevant information: 1. Vehicle configuration: The car has a length, width, and height of 4592mm, 1852mm, and 1629mm respectively, with a wheelbase of 2765mm. The body type is a 5-door, 5-seat SUV, equipped with a single-speed electric transmission, and a top speed of 160 km/h. The car features rear-wheel drive, front MacPherson independent suspension, rear five-link independent suspension, electric power steering, a monocoque body structure, front ventilated disc brakes, rear disc brakes, and an electronic parking brake. 2. Technology configuration: The ID-Crozz is equipped with various technological features, envisioning a future scenario with advanced autonomous driving systems. The car is designed with a retractable steering wheel function to create more space for the driver. Additionally, there are no traditional physical buttons in the car; functions like media control and window operation are all managed via touchscreen. The traditional dashboard is integrated into the steering wheel and the front windshield, creating a futuristic AR-like virtual reality experience.
14
1
Share

What is the reason for the Cruze's low beam not working while the high beam is on?

Cruze if the high beam is on, but the low beam is not working, it may be that the low beam filament is burned out. You can see this by disassembling it, and just replace the bulb. However, if both low beams are not working and the filaments are not burned, you should check if the switch has power. If there is no issue, then check if the fuse is normal. Here is some additional information: 1. Bulbs are divided into headlights, middle lights, and small lights. Headlights refer to the front headlights, mainly including quartz lamps and xenon lamps; middle lights refer to brake lights, turn signals, etc.; small lights refer to interior lights, instrument panel lights, indicator lights, and width lights. 2. Rotating the lever head once turns on the small lights, and twice turns on the headlights. The lever can be pushed up and down. When in the middle position, pushing up switches between low and high beams, and releasing the lever automatically returns it to the middle position. Pushing down switches to the high beam, and you can hear a click sound when pushing down. Releasing the lever does not return it to the original position.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.