What kind of vehicle is used for pouring concrete?

What does 1000r/min mean?

1000r/min is the unit of engine speed. The following are specific details about engine speed: 1. 800/min~1200/min: During cold starts, the idle speed of the ignition engine should be below 800/min or above 1200/min; otherwise, the engine's condition is poor. 2. Below 2000r/min: While driving, try to avoid letting the engine operate below 2000r/min. If the speed is too low, the engine will lack power, and the load on the engine at low speeds can be excessive, causing damage and easily leading to carbon buildup. 3. Above 4000r/min: When the engine operates above 4000r/min, the combustion time becomes shorter, and the fuel does not burn completely, leading to a significant increase in fuel consumption. If driving normally in fifth gear, the speed generally reaches 150km/h, which is already a relatively dangerous speed. 4. 2200~3500r/min: The engine operates most economically and performs best within the range of 2200~3500r/min. During regular use, try to keep the engine speed within this range.

16

2

Share

What are the differences between the Yidong Plus and the Ruicheng CC?

The main differences between the Yidong Plus and the Ruicheng CC are that the Yidong model is longer and has more powerful output. Below is an introduction to the differences between the Changan Yidong and Ruicheng CC: Changan Yidong Plus: The dimensions of this car are 4730mm in length, 1820mm in width, and 1505mm in height, with a wheelbase of 2700mm. It is equipped with a Blue Whale 1.4T engine with a maximum power of 116kW and a peak torque of 260Nm, reaching maximum torque at 1500 rpm. It is paired with a 7-speed dual-clutch transmission. Changan Ruicheng CC: The dimensions are 4490mm in length, 1860mm in width, and 1580mm in height, with a wheelbase of 2710mm. The Changan Ruicheng CC is powered by a 1.5T turbocharged engine with a maximum power of 115kW at 5500 rpm and a maximum torque of 225Nm between 2000-4000 rpm. It is paired with either a 6-speed manual transmission or the latest Aisin third-generation 6-speed automatic transmission.

11

3

Share

Do You Need to Replace Two Tires When One is Damaged?

When one tire is damaged, it is not always necessary to replace two tires. It depends on the wear condition of the other tire. If the wear is severe, it is best to replace both tires together. Below are situations where replacing two tires is recommended: 1. Prolonged Usage: If the tires have been in use for a long time or have high mileage, it is advisable to replace both tires simultaneously. Generally, when a tire has reached half of its lifespan, you can consider replacing both tires, typically after driving more than 40,000 kilometers. 2. Different Tire Brand or Model: If the repair shop does not have the same brand and model of tire as the one on the vehicle and can only provide a different brand, it is recommended to replace both tires for long-term use. The main functions of tires include: 1. Load Bearing: Supporting the entire weight of the vehicle and bearing the load of the car; 2. Traction: Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface; 3. Damage Prevention: Preventing severe vibrations and early damage to automotive components.

11

5

Share

What is C1?

C1 driver's license is one of the codes for motor vehicle driving licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. The application age requirements are as follows: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. The permitted vehicle types are as follows: The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Vehicles that cannot be driven with a C1 license include: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.

4

3

Share

Should the turn signal be turned off when pulling over for the parking test in Subject Three?

Generally, when adjusting the direction while pulling over, the turn signal will automatically return to its normal position as the steering wheel is straightened. Therefore, there is no need to manually turn the turn signal on or off when parking. During the road test, it is mandatory to use the turn signal when pulling over; failing to do so will result in point deduction. Below is relevant information about the Subject Three test: 1. Introduction: Subject Three includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Content: The road driving skills test for Subject Three generally includes: preparing to start, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling procedures.

3

0

Share

What are the three filters in a car and how often should they be replaced?

Car three filters refer to the air filter, oil filter, and fuel filter. It is recommended to replace the three filters every 5,000 kilometers. Below are the specific details of routine car maintenance items: 1. Oil and oil filter replacement: Mainly for the maintenance of the lubrication system. The primary function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the oil during an oil change. Under normal circumstances, a car should be serviced every 5,000 KM. 2. Filter element replacement: The air filter's function is to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The fuel filter is generally replaced after driving 20,000-25,000 KM. 3. Spark plug replacement: Spark plugs are consumable parts and should be replaced every 20,000 KM. In addition, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during routine maintenance, and they should be serviced and maintained based on usage conditions.

19

0

Share

What kind of vehicle is used for pouring concrete?

What does 1000r/min mean?

What are the differences between the Yidong Plus and the Ruicheng CC?

Do You Need to Replace Two Tires When One is Damaged?

What is C1?

Should the turn signal be turned off when pulling over for the parking test in Subject Three?

What are the three filters in a car and how often should they be replaced?

Where are Mercedes-Benz engines produced?

What are the differences between the Verano Pro and Verano Pro GS?

What Are the Tips to Absolutely Avoid Stalling During the Slope Start in Subject 2?

Which Tires Should Snow Chains Be Installed On?