What kind of urea solution should be added to the Great Wall Pao?

1 Answers
PatrickFitz
07/29/25 9:18pm
The Great Wall Pao can use the automotive urea solution available in the auto parts market. The Great Wall Pao series is a flagship model under the Great Wall pickup truck lineup, making its debut at the Shanghai Auto Show on April 16, 2019. It is a brand-new product series built on a new platform and manufactured at the new Chongqing factory, targeting mainstream international markets. Below is an introduction to the Great Wall Pao: 1. Design philosophy: "Pao" symbolizes strength, the courage to break from tradition, ambition, and the explosive release of accumulated energy; it represents uniqueness, a refusal to be ordinary, and boundless imagination. 2. Brand strategy: The "Super Five-Star" plan, which focuses on the user and strives comprehensively in five major areas—super symbols, super factories, super products, super services, and super experiences—to create a full-scenario pickup truck lifestyle and accelerate the globalization process.
Was this review help?
15
4
Share
More Forum Discussions

What Causes Abnormal Noises in the Engine?

Abnormal noises in the engine can be caused by exhaust pipe leakage, dirty throttle valve, or engine misfire. Below are detailed explanations: Exhaust Pipe Leakage: When there is a leakage in the intake or exhaust pipe, the vehicle produces a loud roaring noise as the exhaust rate increases during acceleration. In this case, the exhaust pipe needs to be inspected and replaced. Dirty Throttle Valve: During acceleration, the engine load increases, requiring the throttle valve to open wider and more fuel to be injected. If the throttle valve opening is not optimal due to dirt blockage, it can result in poor air-fuel mixture ratio, causing noise during acceleration. Cleaning the throttle valve is necessary in this situation. Engine Misfire: Engine misfire refers to one or more cylinders not functioning properly, often manifesting as insufficient vehicle power and severe shaking of the exhaust pipe, accompanied by distinct thumping noises from the engine. Inspection and replacement of the engine cylinder are required in this case.
4
2
Share

Are there any tricks when ordering a car from a 4S store without stock?

In the automotive market, the demand for each car model changes daily, and vehicle prices may also fluctuate significantly. If the warehouse has too many new cars, there is a risk of inventory accumulation, and the merchant's funds may also face liquidity issues. Here is an introduction to 4S stores: 1. Introduction: A 4S store, fully known as an automobile sales service 4S store, is a sales outlet that integrates automobile sales, maintenance, parts, and information services. It was introduced from Europe to China after 1998. 2. Features: 4S stores are invested and built by dealers according to the standards set by automobile manufacturers. The design inside and outside the store is unified, with huge investments, often exceeding tens of millions, luxurious and grand, and a comfortable environment. They can only sell a single brand of cars specially authorized by the manufacturer. 3. Business Scope: The 4S store model has developed extremely rapidly in China in recent years. The 4S stores in the automotive industry are a business model introduced by automobile manufacturers to meet customer needs in terms of services. The core meaning of a 4S store is 'automobile lifetime service solution.'
7
4
Share

How Many Digits Does an Engine Number Have?

Common engine numbers typically consist of 7-8 digits. The sequence and content of engine numbers may vary among different manufacturers. Generally, it includes the engine model, production date, and a randomly assigned serial number given when the engine comes off the production line. Some may also include a place-of-origin code. Engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and engine attributes. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, among others. Engines installed in passenger cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production number of the engine, where each engine is assigned a unique number that differs from all others. Structure of an Engine Number: Front Section: Includes product series code, generation symbol, and regional or corporate code. Manufacturers may choose appropriate letters as needed, but these must be approved and recorded by the industry standardization authority. Middle Section: Composed of symbols representing the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear Section: Consists of symbols indicating structural features and usage characteristics. Tail Section: Distinguishing symbols. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols. The rear and tail sections can be separated by a hyphen.
11
4
Share

Is It Normal to Have Slight Bubbles After Tire Repair?

The reasons for slight bubbles after tire repair are as follows: 1. Air entering the tire interior: This may be due to the tire not being repaired in time after being punctured by a nail or the puncture hole being relatively large, allowing air to enter the tire's interior. The air then escapes from the internal puncture, forming slight bubbles. 2. Incomplete repair: It could also be caused by incomplete tire repair leading to air leakage. In such cases, the gas inside the tire will leak quickly, requiring re-inspection and repair of the bubble location. Additional information: The following situations indicate that the tire is not worth repairing and should be replaced promptly: 1. When the puncture hole diameter exceeds 6mm; 2. When the tire has been repaired more than 4 times; 3. When there is a puncture on the tire sidewall; 4. When the tire has worn down to the level of the tread pattern; 5. When the tire is aged and covered with small cracks; 6. When the tire is deformed or has been excessively crushed due to low-pressure driving.
10
2
Share

What is the reason for the S40 indicating that the engine needs repair?

S40 indicating that the engine needs repair is due to a malfunction in the engine system. The following are the specific reasons for engine failure: 1. Sensor failure: including water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine fault light to illuminate. 2. Poor maintenance: Poor engine maintenance is the most common cause of the engine fault light turning on. Vehicles have a certain maintenance cycle. If the owner does not perform maintenance on schedule, combined with poor driving habits, it will increase the burden on engine operation. 3. Oil quality issues: Oil quality includes fuel and engine oil. The fuel added to the car generally has a grade, and engine oil is also divided into semi-synthetic and full synthetic. If the owner does not add as required, it will cause engine wear over time. 4. Poor combustion of the mixture: Engine spark plug failure, ignition coil failure, fuel pump failure, fuel line blockage, etc., can all cause poor combustion of the engine mixture. Poor combustion of the mixture leads to engine carbon deposits or knocking problems, which are ultimately detected by the engine's oxygen sensor and reported to the ECU, naturally triggering the fault light as a warning.
16
2
Share

Can a 4S shop directly license a car?

4S shops can handle the license application procedures on behalf of the car owner, for which a certain service fee will be charged. The following is an introduction to car license plates: 1. Introduction: License plates are commonly known as car plates, which are plates hung on the front and back of the car. The materials usually used are aluminum, iron, plastic or paper, on which the car's registration number, registration area or other relevant information are engraved. 2. Function: The license plate is the numbering and information registration of each vehicle. Its main function is to know the area to which the vehicle belongs through the license plate, and the owner of the vehicle and the registration information of the vehicle can also be found according to the license plate. 3. Temporary license plate: The temporary license plate of a car refers to the temporary vehicle driving certificate issued by the vehicle management department of the public security organ before the car is officially registered due to the handling of some procedures. The use of temporary license plates is time-limited and regional.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.