What kind of transmission is used in the Peugeot 3008?

How Deep Can a Civic Go Through Water Without Any Impact?

Civic can go through water without any impact when the water depth is one-third of the tire height. Below are specific details about the Civic: 1. Background: Honda Civic (CIVIC) offers various models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedans. The Honda Civic launched in the domestic market shares the same production platform as the existing Dongfeng Honda model, the Honda CR-V, with both vehicles using the same chassis, which technically provides the prerequisite for the domestic production of the Honda Civic. 2. Advantages: The interior craftsmanship has improved, with a strong sense of design hierarchy; the storage space is reasonably designed, with ample passenger and trunk space; it accelerates quickly; gear shifting is smooth, and the steering wheel is flexible; it adopts ECON technology, resulting in ideal fuel consumption; the after-sales service network is comprehensive, making maintenance and repairs convenient; it is equipped with a variety of safety features, ensuring good safety.

19

0

Share

How Long Will a Flood-Damaged Car Last Before Problems Arise?

There isn't a precise answer to this question. Generally, such cars can run without major issues for three to four years. Some flood-damaged vehicles may last four years, while others, after repairs, might run for five years. Therefore, the actual lifespan depends on the specific condition of the vehicle. However, many auto repair professionals advise against purchasing used flood-damaged cars for the following reasons: 1. Flood-damaged cars are prone to short circuits in electronic systems: This poses a risk of spontaneous combustion. Critical systems like ABS (Anti-lock Braking System), ESP (Electronic Stability Program), and ECU (Engine Control Unit) may fail during crucial moments, leading to potentially disastrous consequences. 2. Dynamic flood damage: If the engine is started again after water ingress, it can cause deformation of internal connecting rods, essentially rendering the engine useless and requiring major repairs. 3. Rapid cooling and deformation of heated components like the engine and exhaust pipes: This introduces unbalanced stresses, significantly reducing the lifespan of these parts. 4. Corrosion risk: Metal parts damaged by dirty water can corrode the vehicle's structural integrity if not promptly treated with panel beating and repainting.

7

1

Share

How many series of cars does Volkswagen have?

Volkswagen has four series of cars, with specific information as follows: 1. Volkswagen CC: The Volkswagen CC is a sporty sedan under FAW-Volkswagen. The CC is the culmination of four years of dedicated research and development by the German Volkswagen design team, featuring an elegant silhouette and maintaining a mature business-oriented texture. 2. Volkswagen Phaeton: The Volkswagen Phaeton is a top-tier luxury sedan produced by the German Volkswagen Group, officially launched into mass production in 2002. 3. Volkswagen Audi: Audi is a luxury car brand under the Audi AG subsidiary of the German Volkswagen Group. Representing high technological standards, quality benchmarks, innovation capabilities, and classic model designs, Audi is one of the world's most successful car brands. 4. Volkswagen EOS: The Volkswagen 'Goddess of Dawn'—the EOS sports car, inherits the new generation of Volkswagen's family styling, including teardrop-shaped projection headlights and a glossy shield-shaped radiator grille.

6

0

Share

Will the engine water ingress warning light come on?

Engine water ingress warning light will illuminate. If the engine warning light turns on after driving through water, it indicates that water has affected the engine. Pay attention to the following aspects: 1. The car can still be driven, but the air filter is flooded: After the engine inhales air, it brings some water into the intake tract, forming water vapor. The water vapor mixes with gasoline and burns completely, having minimal impact on the engine. 2. A small amount of water enters the engine: When it reaches the cylinders and mixes with the engine oil, the oil quality deteriorates. Oil containing water will increase wear on engine components, potentially leading to increased engine noise and vibration during future driving. 3. The engine starts again but shuts off after a few seconds: This is the most severe situation. Since water cannot be compressed, when water enters the cylinders while the engine is still running at high speed, the inability to compress water during the power stroke directly causes the valves and connecting rods to bend, pistons to seize, severe cylinder wear, and crankshaft bending. It is recommended to change the oil as soon as possible. Some vehicle models are designed with the intake tract located on the fender or hood, and the height of splashes while driving through water varies, making it incomparable. Change the oil and blow the intake pipe clean.

13

4

Share

What are the two types of piston rings?

There are two types of piston rings: compression rings and oil rings. Below is an introduction to piston rings: 1. Introduction: Piston rings are metal rings fitted into grooves on the piston. Piston rings are divided into two types: compression rings and oil rings. Compression rings are used to seal the combustible gas mixture in the combustion chamber, while oil rings are used to scrape excess oil from the cylinder walls. 2. Applications: Piston rings are widely used in various power machinery, such as steam engines, diesel engines, gasoline engines, compressors, hydraulic machines, etc. They are extensively employed in automobiles, trains, ships, and yachts. 3. Functions: Piston rings are core components inside fuel engines, working together with cylinders, pistons, and cylinder walls to seal fuel gases. The functions of piston rings include sealing, regulating oil (oil control), heat conduction (heat transfer), and guidance (support), totaling four main roles.

16

3

Share

What is the refrigerant charge amount for Nissan Tiida?

Nissan Tiida refrigerant charge amount is 550 grams. Methods to determine if a car's air conditioning lacks refrigerant: Use a thermometer to measure the temperature difference between the indoor unit's air inlet and outlet. A difference of more than 8 degrees is considered normal, indicating better air conditioning performance, and can reach around 15 degrees. If the difference is below 8 degrees, refrigerant may need to be added. Methods for adding refrigerant: Currently, one bottle of refrigerant on the market is generally 220 grams or 250 grams. For mid-to-low-end car models, add 3-4 bottles; for high-end models, add 4-6 bottles. The amount to be added for each car model is specified, and the car manual will indicate the required amount. Alternatively, the charge amount can be controlled based on the pressure gauge's display. If a dedicated charging machine is used, the amount can be set automatically.

5

3

Share

What kind of transmission is used in the Peugeot 3008?

How Deep Can a Civic Go Through Water Without Any Impact?

How Long Will a Flood-Damaged Car Last Before Problems Arise?

How many series of cars does Volkswagen have?

Will the engine water ingress warning light come on?

What are the two types of piston rings?

What is the refrigerant charge amount for Nissan Tiida?

Why is there smoke after changing the engine oil?

Is the Sagitar a Joint Venture or Domestic Car?

What is the ground clearance of the Trumpchi Shadow Leopard?

Should the Tesla Model 3 opt for the 19-inch wheels?