What kind of transmission does the VELITE6 use?

How much horsepower can an Audi A4 be tuned to?

Audi A4 has 1.4T and 2.0T models, which can gain 30 to 40 horsepower after a stage 1 tune. The new domestically produced Audi A4 uses three engines in total: These are the low-power version 2.0-liter turbocharged engine, the medium-power version 2.0-liter turbocharged engine, and the high-power version 2.0-liter turbocharged engine. The low-power version 2.0-liter turbocharged engine has 150 horsepower and a maximum torque of 270 Nm. The medium-power version 2.0-liter turbocharged engine has 190 horsepower and a maximum torque of 320 Nm. The high-power version 2.0-liter turbocharged engine has 252 horsepower and a maximum torque of 370 Nm. All three engines are paired with a 7-speed dual-clutch transmission. Audi A4's front suspension: uses a five-link independent suspension, and the rear suspension also uses a five-link independent suspension. The five-link independent suspension is a structurally complex independent suspension, and its cost is relatively high. The five-link independent suspension can improve the car's handling and ride comfort.

19

2

Share

How many thermostats does the Nissan Teana have?

Nissan Teana has one thermostat. Thermostat: It is a valve that controls the flow path of coolant. It is an automatic temperature-regulating device, usually containing a temperature-sensing component, which opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The steps for replacing the thermostat are as follows: Turn off the engine and open the front hood. Disconnect the negative battery cable to prevent the electric fan from suddenly operating during work, which may cause personal injury; Remove the plastic cover outside the timing belt; The position of the generator may affect the replacement of the thermostat, so the generator assembly needs to be removed; First, place a water collection tray under the car, then prepare to remove the water hose and wait for the antifreeze to drain completely; Remove the faulty thermostat and install the new one. After installing the thermostat, apply a layer of sealant to the hose area; Reinstall the removed water hose, generator, and timing plastic cover in their original positions. Reconnect the negative battery cable, add new antifreeze, and then start the car for testing.

11

0

Share

Which Performs Better, China 5 or China 6?

China 6 performs better. The differences between China 5 and China 6 are as follows: Emission Limits: The China 6 standard imposes 40% to 50% stricter emission limits compared to China 5. The emissions under China 6 are significantly lower than those under China 5. Simply improving engine technology as before is insufficient to meet the China 6 standards. A comprehensive optimization approach is required, which involves integrated improvements (some through retrofitting) such as engine upgrades, PDF (Particulate Diesel Filter), and particulate traps. Fuel Neutrality: China 6 adopts the principle of fuel neutrality, meaning the same emission limits apply regardless of the fuel type. In contrast, during the China 5 phase, diesel and gasoline vehicles had different emission standards. Emission Standards: Compared to China 5, China 6 reduces nitrogen oxides (NOx) by 77% and particulate matter (PM) by 67%. It also introduces limits on particulate number (PN) and tightens requirements for emission control device durability and On-Board Diagnostics (OBD) systems.

10

5

Share

Does Rusty Steering Column on Volkswagen CC Indicate a Flood-Damaged Vehicle?

Steering column rust could be caused by a flood-damaged vehicle or inherent material issues. Causes of rust: Without anti-rust treatment or heat treatment, friction inevitably occurs during steering column movement, damaging the protective layer and leading to rust. High humidity in southern regions makes inventory vehicles more prone to rust. Whether domestic, joint-venture, or imported brands, steering column rust is common due to multi-supplier production chains. Poor-quality or untreated steering columns rust more easily. Methods to identify flood-damaged vehicles: Damaged wiring (visible in dashboard with sediment in connectors). Rust on seat mounting brackets. Muddy sound insulation under carpets (becomes loose when waterlogged). Moldy seatbelt bases with rusty mechanisms and stiff operation. Check cigarette lighter for mud/rust. Accelerated underbody corrosion compared to normal vehicles. Moisture inside headlights.

17

4

Share

What RPM at 120 km/h Indicates a Good Engine?

Currently, the displacement of mainstream engines is mostly around 1.5. For engines of this displacement, the RPM generally stays between 2200 and 3200. Naturally aspirated engines and turbocharged engines have different RPM values. Due to the boost from the turbine, turbocharged engines typically have lower RPM values compared to naturally aspirated engines. Depending on the vehicle class, the RPM at 120 km/h can be roughly categorized as follows: For A-class vehicles, priced between 100,000 to 150,000 yuan, the corresponding engine RPM at 120 km/h is 2500~3500 rpm. For A+ class sedans, the RPM at 120 km/h is around 2500 rpm. For B-class sedans, it is approximately 2000 rpm, and for C-class sedans, it is around 1800 rpm. Owners can match these values to their own vehicles. If your vehicle's engine RPM at 120 km/h exceeds 3500 rpm, it is definitely abnormal or may be quite old, and the owner should consider replacing it with a new car.

14

0

Share

Does BMW Need a Bug Mesh?

BMW needs a bug mesh. Reasons for installing a bug mesh: It is best to install a bug mesh for highway driving. During high-speed driving, if small stones hit the condenser, they may break it. Additionally, installing a bug mesh can prevent small insects or other debris from entering the condenser, which could affect cooling. Functions of a bug mesh: Installing a bug mesh not only prevents insects from entering but can also block leaves, insects, sand, stones, and other debris from passing through the front bumper gaps and hitting the radiator, thereby protecting the radiator and maintaining its cleanliness. The car radiator bug mesh is installed at the front radiator frame position, adding an extra layer of protective mesh outside the radiator to prevent various external debris from hitting the radiator, thus protecting it from damage. This is known as the radiator protective mesh. The car radiator protective mesh is very fine and, when installed in front of the radiator, can reduce the entry of more tiny debris. The fine design of the bug mesh can easily block the radiator during vehicle movement. The radiator cools down through high-speed airflow during driving, but after installing the bug mesh, the airflow will be weakened. The bug mesh needs to be cleaned periodically, and if damaged, it should be replaced promptly. Note that when cleaning the bug mesh, avoid using a high-pressure water gun, as the strong water pressure can damage the radiator fins. The radiator fins are made of numerous thin and fragile aluminum fins.

12

0

Share

What kind of transmission does the VELITE6 use?

How much horsepower can an Audi A4 be tuned to?

How many thermostats does the Nissan Teana have?

Which Performs Better, China 5 or China 6?

Does Rusty Steering Column on Volkswagen CC Indicate a Flood-Damaged Vehicle?

What RPM at 120 km/h Indicates a Good Engine?

Does BMW Need a Bug Mesh?

What are the gear ratios for each gear of the Audi A6?

What is the range of the Sunra 2F in kilometers?

What does the wrench symbol on the Civic dashboard mean?

What is the small Golf car?