···
Log in / Register

What kind of transmission does the Tang fuel version use?

4 Answers
JulietteDella
07/29/25 8:08am
The Tang fuel version uses a 6-speed automatic manual transmission. More information about the Tang fuel version is as follows: 1. Power configuration. This car is equipped with a 2.0T turbocharged engine, and the transmission system configuration is a 6-speed automatic manual transmission that matches the engine. The transmission used in this car is produced by Hyundai Powertech. It has an ECO energy-saving mode, and during the driving process, you can use both manual mode and automatic mode. 2. Although this transmission does not have a significant advantage in terms of gear count, its technology is very reliable, and the transmission effect is excellent. During driving, the gear shifts are smooth, with almost no noticeable jerking, which to some extent enhances the driving comfort of the car. 3. An automatic manual transmission refers to a transmission that has both manual and automatic modes, allowing for both manual and automatic gear shifting. During the driving process, the two modes can be switched at will.
Was this review help?
14
0
Share
Ariana
08/13/25 3:57am
I remember my Tang fuel version has been running for almost five years, equipped with a 6-speed wet dual-clutch transmission. The gear shifting is quite fast, especially smooth at start-up without any jerking. For maintenance, I change the transmission oil at the 4S shop every two years, and haven’t encountered any major issues. On highways, it feels fuel-efficient, averaging around 8 liters per 100 kilometers, which is above average for SUVs in its class. If you switch to sport mode, the response becomes more sensitive, but the automatic mode is sufficient for daily city driving. This transmission is quite stable, suitable for long-distance drivers like me, but avoid stomping the throttle too hard to prevent overheating protection.
Was this review help?
9
4
Share
Expand All
SanPresley
10/05/25 4:30am
I just test-drove the Tang fuel version, which is equipped with a 6-speed DCT transmission. It's very convenient to handle, with instant gear shifts at traffic lights and no sense of delay. On congested city roads, the automatic mode avoids frequent jerks, making it much more comfortable than some manual transmission cars. The fuel consumption is also satisfactory, running well on 92-octane gasoline. It also supports manual shifting for fun, but it's basically unnecessary. I think it's very practical for commuters, with ample space to carry colleagues without any pressure. The only downside is occasional minor noise at low speeds, but regular checks can solve that.
Was this review help?
4
4
Share
Expand All
DiSabrina
11/18/25 6:02am
I've been using the Tang fuel version to pick up and drop off my kids for several years. The transmission is a 6-speed dual-clutch, and the automatic gear operation is straightforward—just push it into drive without much manual intervention. The gear shifts are quite smooth, especially when making slow turns in the neighborhood, with no sense of vibration, making it safe and reliable. The spacious interior is great for family outings, and the low fuel consumption saves a lot on expenses. With regular maintenance, it has had no issues, making it very suitable for moms' daily commuting.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the source of the Roewe RX5 engine?

The Roewe RX5 engine is produced at SAIC's Lingang factory and is a domestically manufactured engine. Below are the specific details about the Roewe RX5: 1. The Roewe RX5 is an internet-connected SUV launched by SAIC Roewe in 2016. It adopts the 'Blue Core' high-efficiency powertrain technology and is equipped with two turbocharged engines: a 2.0T and a 1.5T, both featuring in-cylinder direct injection. 2. Specifically, the 2.0T engine delivers a maximum power of 220 horsepower and a peak torque of 350 Nm, with a combined fuel consumption as low as 8.1L per 100 km. The 1.5T engine produces a maximum power of 169 horsepower and a peak torque of 250 Nm, with a combined fuel consumption of just 6.8L per 100 km. 3. Additionally, the Roewe RX5 features Porsche-tuned chassis, GKN intelligent all-wheel-drive system (shared with Land Rover), a fully independent suspension system, and a four-way high-speed CANBUS system bus, all of which significantly enhance driving and riding quality.
16
4
Share

How to Switch to Manual Mode in a Tiptronic Transmission?

On a tiptronic transmission car, the M position represents the manual mode. While driving, release the accelerator and shift the gear lever to the M position. The car will automatically select a gear based on your current speed, and you can then shift up or down by pushing or pulling the gear lever. Here is some additional information: 1. A tiptronic transmission car refers to a vehicle equipped with a 'tiptronic' transmission, which combines both manual and automatic shifting modes. 2. You can manually switch gears by pushing the lever up to shift up or pulling it down to shift down. You can start the car in 2nd gear. When in a high gear, releasing the accelerator without braking will not cause a downshift. If you press the accelerator and the speed is too low, the transmission will automatically downshift to an appropriate gear. The transmission will not upshift automatically while driving, allowing you to rev up to the redline.
16
0
Share

What is the matching method for the Santana anti-theft x431?

Use the decoder to enter the anti-theft unit, input the password of the new anti-theft box for login. Select matching, enter the channel to input the original car's password, then enter the channel for matching. The original car password can be read from the engine computer memory. Below is more relevant information: 1. The third-generation anti-theft locking system of Volkswagen models consists of the following components: a matched anti-theft locking system control unit (integrated in the combination instrument); an indicator light in the combination instrument; a reading coil on the ignition switch; a matched engine control unit and a matched ignition key with electronic components. 2. System matching is divided into the following types: car key matching, matching after replacing the combination instrument, matching after replacing the engine control unit, and matching after replacing both the combination instrument and engine control unit. Before matching, check the fault storage. If there are fault codes, troubleshoot the faults and clear the fault codes. After completing the matching, check the fault memory in the fault storage. If no fault memory is stored, it indicates that the key matching has been successfully completed.
19
0
Share

How to Remove the Transmission of Great Wall Haval H6?

Below is the method for removing the transmission of the Great Wall Haval H6: 1. Remove the front subframe; 2. Disconnect the connection between the engine and the transmission; 3. Take off the transmission and proceed with disassembly. Here is some related information about the Great Wall Haval H6: 1. The Great Wall Haval H6 is a 5-door, 5-seat compact SUV with exterior dimensions of 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. 2. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 110 kW and a maximum torque of 210 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a double-wishbone independent rear suspension.
5
5
Share

What Are the Maintenance Items for Private Cars?

Here are the specific maintenance items for private cars: 1. Engine oil and oil filter replacement: Primarily for the maintenance of the lubrication system. 2. Air filter replacement: Its function is to filter the air before it enters the cylinders, removing impurities, dust, sand, and other foreign particles. 3. Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Here is more information about car maintenance: 1. The optimal time for the first car maintenance is between 4,000 to 5,000 kilometers of driving, but the car should not be used for more than six months. Beyond this time, the 4S shop will not perform the first maintenance. 2. The first maintenance of the car must be done at a car 4S shop. All car manufacturers stipulate that only cars with their first maintenance performed at a 4S shop can enjoy the car quality guarantee.
15
0
Share

What is the difference between PS4 and PS4S tires?

Here are the differences between PS4 and PS4S tires: different positioning, different formulations used, different performance, and different tread designs. Below are the specific introductions to PS4 and PS4S tires: 1. PS4 is not a run-flat tire. Compared to run-flat tires, its advantages are that the tires are relatively light, which can help save fuel consumption, and the tire material is soft, providing better comfort, especially noticeable during high-speed driving. 2. PS4S is mainly targeted at high-performance models, suitable for 80% street use and 20% track use. It adopts a dual tread compound technology, with the outer tread using a composite elastic compound to enhance dry performance, and the inner tread adding a functional elastomer compound to improve wet grip and braking performance.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.