What kind of tires does the Vision SUV use?

What grade of gasoline should be used for the Changan Oshan X5?

All models of the Changan Oshan X5 should use 92-grade gasoline. This gasoline grade is recommended in the official vehicle user manual. In addition to checking the appropriate gasoline grade in the vehicle user manual, you can also find it on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-grade gasoline, those between 10.0-11.5 should use 95-grade gasoline, and those with a higher compression ratio should use 98-grade gasoline. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower-grade gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-grade gasoline contains 92% isooctane and 8% n-heptane, while 95-grade gasoline contains 95% isooctane and 5% n-heptane. If the Changan Oshan X5 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is much lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

20

0

Share

What type of engine oil is used for the Great Wall Wingle 5?

The original engine oil for the Great Wall Wingle 5 is 5W-30. In terms of applicability, the original oil is more suitable for the engine. However, depending on different needs, engine oil can also have other benefits such as noise reduction, fuel efficiency, and improved performance. Therefore, you can also choose engine oils from brands like Mobil, Shell, or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The second number represents the kinematic viscosity of the oil at 100°C. The higher this number, the better the oil maintains its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil for the Wingle 5 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some new oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the bottle. Start the engine and let it run for 5 minutes, then check for any leaks around the drain plug and oil filter. If there are leaks, they should be repaired. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

11

2

Share

What are the new regulations for vehicle scrapping?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, non-commercial small and mini vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping process. In addition to the above vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and mini taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and mini commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Mini commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice" accordingly. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Inspection Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle cannot be driven back to the registration location due to damage, the owner can submit the vehicle for scrapping to a local recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must still be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a new vehicle. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation; (2) The owner must have owned the original vehicle for more than three years.

8

2

Share

How many meters before a turn is parking prohibited?

Driving a motor vehicle within 50 meters of a curve is prohibited from parking. Because parking at the turn affects the line of sight, which is not conducive to safe driving and can easily cause accidents. Therefore, when driving and about to turn, you must prepare to slow down in advance, honk the horn or flash the headlights to alert oncoming vehicles. Slower speed makes the vehicle easier to control. According to Article 63 of the "Road Traffic Safety Law Implementation Regulations", temporary parking of motor vehicles on the road shall comply with the following provisions: In sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as crosswalks and construction areas, parking is prohibited; Intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and sections within 50 meters of the above locations, parking is prohibited; Before the vehicle comes to a complete stop, doors must not be opened and passengers must not board or alight. When opening doors, other vehicles and pedestrians must not be obstructed; In sections without sidewalk railings (hedges), crosswalks, construction areas (except for construction vehicles), and opposite obstacles, parking is prohibited; Roadside parking should be on the right side of the road in the direction of travel. The driver must not leave the vehicle and should depart immediately after passengers board or alight or goods are loaded or unloaded; In front of bus stops, emergency stations, gas stations, fire hydrants or fire stations, and sections within 30 meters of the above locations, parking is prohibited except for the use of the above facilities. According to Article 56 of the "Road Traffic Safety Law of the People's Republic of China": Motor vehicles shall be parked in designated places, and parking motor vehicles on sidewalks is prohibited; except for parking spaces marked in accordance with Article 33 of this Law. When temporarily parked on the road, other vehicles and pedestrians must not be obstructed; Article 93: For violations of the laws and regulations on motor vehicle parking and temporary parking, the illegal act may be pointed out, and an oral warning may be given, ordering immediate departure. If the motor vehicle driver is not present or refuses to leave immediately, obstructing the passage of other vehicles and pedestrians, a fine shall be imposed, and the motor vehicle may be towed to a location that does not obstruct traffic or to a location designated by the traffic management department of the public security organ. The traffic management department of the public security organ shall not charge the party for towing and shall promptly inform the party of the parking location. If the motor vehicle is damaged due to incorrect towing methods, compensation liability shall be borne according to law. More precautions for car parking are as follows: Be sure to turn on the turn signal when parking. Before parking, that is, during the process of transitioning from driving to parking, the turn signal must be turned on to alert the vehicles behind and reduce the possibility of accidents. Leave enough space for the vehicle to exit. Try to park compactly, but also pay attention to the distance in front and behind to ensure that the vehicles in front and behind have space to exit the parking space. If unsure, get out of the car to observe. If you do not have enough understanding of the terrain when parking, do not act blindly. Instead, you should stop first, get out of the car to observe to avoid accidents.

5

Share

What are the dimensions of the Sehol E10X?

Sehol E10X has dimensions of 3650/1670/1540mm. Specifications: The Sehol E10X is an A00-class mini electric vehicle launched by Sehol New Energy, with a wheelbase of 2390mm. All models are equipped with 165/65R14 specification wheels. Powertrain: The Sehol E10X is equipped with a permanent magnet synchronous motor and a lithium iron phosphate battery. It offers models with pure electric ranges of 150km, 200km, and 302km. The 302km range model has a maximum power of 45kW and a maximum torque of 150Nm.

3

2

Share

What are the reasons for a car not starting in the morning?

There are several main reasons why a car may not start in the morning: 1. Insufficient battery power: The most direct impact on family cars is the battery. In low temperatures, a car's power consumption is significantly higher than in other seasons, and the battery's capacity also decreases due to the cold environment. 2. Restricted oil flow: In winter, the viscosity of engine oil increases, making it more difficult to flow, which in turn increases engine resistance, leading to cold start difficulties. 3. Frozen exhaust pipe or electronic throttle carbon buildup: Frozen exhaust pipes mainly occur in situations where the car is used for short distances or infrequently.

11

5

Share

What kind of tires does the Vision SUV use?

What grade of gasoline should be used for the Changan Oshan X5?

What type of engine oil is used for the Great Wall Wingle 5?

What are the new regulations for vehicle scrapping?

How many meters before a turn is parking prohibited?

What are the dimensions of the Sehol E10X?

What are the reasons for a car not starting in the morning?

What is the fuel consumption of the Verano?

Is the Changan CS55plus equipped with a Blue Whale engine?

What is the difference between a nearly new car and a brand new car?

What are the hidden features of the Toyota IZOA?