What kind of paint is used for motorcycle shell spraying?
3 Answers
Motorcycle shell spraying should use special plastic paint for motorcycles. More information about special plastic paint for motorcycles is as follows: 1. Special plastic paint for motorcycles is a plastic paint made of high-performance resin, imported additives, weather-resistant color paste, and glitter powder. 2. Advantages of special plastic paint for motorcycles: strong adhesion, high hardness, and good decorative effect. 3. Uses of special plastic paint for motorcycles: used for painting motorcycle, electric bicycle, and electrical appliance shells. 4. Before using special plastic paint for motorcycles, stir the paint evenly, adjust the construction viscosity to about 11-13 seconds with matching thinner, the air compressor pressure during spraying should be around 2-3kg/m², the construction temperature is best within the range of 12-30℃, and the relative humidity of the construction site should not exceed 70%.
As an enthusiast who has personally modified several motorcycles, I believe choosing the right paint is crucial! For motorcycle bodywork, it's best to use durable coatings like polyurethane or acrylic paints. Polyurethane paint is particularly scratch-resistant and UV-resistant, making it last for years without fading even under constant exposure to wind and sun—I've tested it myself and am very satisfied with the results. For the primer, I recommend epoxy primer as it prevents rust and helps subsequent paint layers adhere better. If you don't want to use a professional spray gun, spray paint cans available at supermarkets can work, but remember to clean the bodywork and sand it smooth before starting. After painting, add a layer of clear protective paint to enhance the gloss. From my last DIY project, I learned to check the paint's uniformity to avoid bubbles or sagging. Overall, taking the time to choose the right paint can save money and make your bike look cooler!
From my experience working in the workshop, choosing paint for motorcycle bodywork requires considering both protection and finish. Polyurethane or acrylic paints are generally the top choices for topcoats due to their fast drying, excellent gloss, and resistance to oil stains and corrosion. For primers, epoxy-based ones are best to ensure strong adhesion. I always advise customers against using cheap paints, as they tend to peel when exposed to rain. Additionally, water-based paints are becoming popular now—they're less polluting and safer, but spraying them requires the right temperature. Tools are also crucial: spray guns provide more even coverage than aerosol cans. One last tip: sand and remove rust before applying primer, and let each layer dry thoroughly before applying the topcoat. A slightly thicker paint layer can effectively prevent impact marks. Professional treatment ultimately extends the lifespan.
