What kind of oil should be used in a turbocharged engine?

1 Answers
PenelopeRose
07/29/25 3:15pm
Turbocharged engines have higher requirements for oil, and it is recommended to use fully synthetic oil. Here is an introduction to fully synthetic oil: 1. Because the lubrication effect of fully synthetic oil is better than other types of oil, it can reduce the wear of internal engine components and extend the engine's lifespan. 2. Fully synthetic oil is a high-grade oil product, derived from ethylene and propylene dispersed from natural gas or crude oil, which are then polymerized and catalyzed through complex chemical reactions to form a lubricating fluid composed of large molecules. 3. The molecules of fully synthetic oil are arranged neatly, giving it strong resistance to external variables, resulting in better performance. Its thermal stability, oxidation resistance, and viscosity change resistance are naturally much stronger than those of mineral oil and semi-synthetic oil.
Was this review help?
8
2
Share
More Forum Discussions

Is the Trunk of the 718 in the Front or the Back?

The 718 has trunks both in the front and the back. Here are the ways to open the car trunk: 1. Mechanical Key: Insert the key into the tailgate lock to open or close the tailgate. This is a mechanical method and dates back to the era when car tailgates first appeared. Nowadays, this method is considered too cumbersome and has largely been phased out. 2. Remote Key Direct Opening: Using the remote key to open the car trunk is the most direct and simplest method. It's quite straightforward—just press the trunk opening button on the remote key. 3. Pressing the Unlock Button: Some car models may not have a dedicated trunk opening button on the remote key. In such cases, simply pressing the unlock button will also unlock the tailgate. 4. Smart Key + Tailgate Switch: Some models come with a smart key. As long as the remote key is within a certain range (usually about 1 meter), pressing the switch on the tailgate will directly open the trunk.
11
5
Share

What licenses can be added to a C2 license?

C2 license holders can upgrade to any level of driving license, such as C1, B1, B2, etc. Below is relevant information about driving license upgrades: 1. Upgrade requirements: To upgrade a driving license, you must have a local household registration where you intend to upgrade, and the issuing authority of the license must also be local. If you do not have a local household registration and local license relationship, the upgrade will not be processed, and you must transfer the relationship. All types of driving licenses require the probationary period to be completed before an upgrade can be applied for. 2. Scoring cycle: After adding a permitted vehicle type and obtaining a new driving license, the validity period of the license will not be recalculated. Additionally, the scoring cycle always starts from the initial issuance date of the original license. It is important to note that during the probationary period after the upgrade, if the license has a record of 12 penalty points, the probationary permitted vehicle type driving qualification will be revoked.
13
4
Share

What are the dimensions of Audi?

2021 Audi A6L dimensions are 5038/1886/1475mm. Here are the related details: 1. Introduction: Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group. Representing high technology, quality standards, innovation capability, and classic car models, Audi is one of the leading automotive brands. The company headquarters is located in Ingolstadt, Germany, and has subsidiaries in many countries including China. 2. Main Models: The main models include A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, and the S and RS performance series.
10
5
Share

Are Daytime Running Lights the Same as Width Indicator Lights?

Daytime running lights are not the same as width indicator lights. Width indicator lights are located at the four corners of the vehicle and are used to display the width of the vehicle. Daytime running lights are lights that turn on when the vehicle is powered on, and their purpose is to make the vehicle visible to others. Below are specific details about width indicator lights: 1. Introduction: Vehicle width indicator lights are the front and rear position lights of the car. Essentially, clearance lights and width indicator lights are quite similar. The location of width indicator lights varies depending on the vehicle model. On smaller cars, width indicator lights are commonly referred to as small lights. On larger vehicles, due to their size, the lights on the front and rear sides are called width indicator lights. On trucks, width indicator lights are commonly known as side lights. 2. Function: Their primary purpose is to indicate the presence of the vehicle and its approximate width during nighttime driving, helping other vehicles judge when passing or overtaking.
5
5
Share

What are the differences between 7nr and 5nrfe?

Both the 7nr and 5nrfe engines belong to Toyota's NR series of engines, and there is essentially no difference between them. Below is an introduction to the classification of automotive engines: 1. Gas turbine: The working characteristic of this type of engine is that combustion produces high-pressure gas, which is used to drive the turbine blades to rotate, thereby outputting power. Gas turbines have a wide range of applications, but due to the difficulty in finely adjusting the output power, they are rarely used in cars and motorcycles. Only some racing cars have been equipped with gas turbines. 2. Jet engine: This refers to an engine that directly generates thrust by the high-speed jet of gas from the nozzle. It is widely used as the power unit for aircraft. Fuel and oxidizer undergo chemical reactions in the combustion chamber to release thermal energy, which is then converted into the function of adjusting the airflow in the nozzle. Engines that carry oxidizer in addition to fuel are called rocket engines, including solid-fuel rocket engines and liquid-fuel rocket engines.
17
2
Share

What does HA fault mean?

HA fault refers to the automatic electronic parking indicator, indicating insufficient battery power. Additional information: 1. Auto Hold: Auto Hold is an automatic braking function. After activating this function, for example, when stopping at a red light, it is equivalent to not needing to pull the handbrake, simplifying operations by avoiding the use of the handbrake or electronic handbrake. For automatic transmission models, it also eliminates the need for frequent shifting between D to N or D to P. 2. Function: Auto Hold proves particularly useful when waiting in traffic on slopes. During hill starts, some vehicles may roll back slightly due to operational errors between releasing the brake pedal and pressing the accelerator, leading to unnecessary losses. However, vehicles equipped with electronic parking can remain stable on slopes. When starting again, simply applying a bit of throttle allows the vehicle to move forward without worrying about rolling back.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.