What kind of oil should be used for the maintenance of the Lamando 230?

1 Answers
McFinley
07/29/25 12:39pm
The Lamando 230 car recommends the use of 5W-30 fully synthetic engine oil, and 0W-30 fully synthetic engine oil can also be used, such as Mobil 1, Shell Helix, Castrol Edge, etc. These types of engine oils have excellent lubrication effects. The following is a brief introduction to the Lamando 230: 1. In terms of appearance, the Lamando has only some subtle changes compared to the concept version, and the design remains very sporty. The front face adopts a family-style design, with a three-bar grille connected to the headlights, and round fog lights on either side of the bumper. The side lines of the new car are very smooth, with a straight and deep waistline extending all the way to the rear of the car, leaving a very impressive impression. As for the rear, the lower part of the bumper features a two-tone design, with black color matching to highlight a sporty feel. 2. The 230 car is equipped with a 1.4T low-power turbocharged engine. Unlike a naturally aspirated engine, the turbocharged engine experiences greater wear and tear on internal components during operation, so it is recommended to use higher-performance engine oil to protect the engine.
Was this review help?
16
5
Share
More Forum Discussions

How to reset the maintenance light on an Infiniti Q50?

Method to reset the maintenance light on an Infiniti Q50: 1. Start the engine; 2. Find the information option on the central control screen and click to enter; 3. Select the maintenance information and then click reset. The Infiniti Q50 uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. Both the front and rear suspensions of this car are equipped with stabilizer bars, which can reduce the degree of body roll during fast cornering. The Infiniti Q50 comes with two engine options: a 3.7-liter V6 naturally aspirated engine and a 3.5-liter naturally aspirated engine. The model equipped with the 3.5-liter naturally aspirated engine is the hybrid version. Both engines are paired with a 7-speed automatic transmission.
17
3
Share

What Causes Unstable Car Idling?

There are several reasons for unstable car idling, including severe engine carbon buildup and excessive carbon deposits in the throttle body and intake manifold. The details are as follows: Severe Engine Carbon Buildup: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start the engine. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become overly rich. The combustible mixture in the engine alternates between lean and rich, leading to unstable idling after a cold start. It is necessary to clean the fuel system and inspect the idle air control valve. It is recommended to use high-quality fuel to reduce carbon buildup. Excessive Carbon Buildup in the Throttle Body and Intake Manifold: Excessive carbon deposits and dirt in the throttle body and surrounding intake manifold change the cross-sectional area of the air passage, making it difficult for the control unit to precisely regulate the idle air intake. This results in an overly rich or lean air-fuel mixture, leading to abnormal combustion. Spark plugs can also accumulate carbon deposits, which can be cleaned to restore their activity. However, some spark plugs may be nearing the end of their service life, leading to reduced performance. Weak sparks from spark plugs in individual cylinders can affect the car's performance. Faulty spark plugs can cause misfires, but minor faults in spark plugs of individual cylinders may result in unstable idling. It is necessary to regularly maintain the car at an auto shop for thorough and professional inspection and repair. Regularly clean the throttle body and intake system to remove carbon deposits.
18
4
Share

What does the ESC indicator on the dashboard mean?

The ESC indicator on the dashboard indicates a malfunction in the vehicle's ESC system, meaning the Electronic Stability Control system is not operational. The primary function of ESC is to enhance stability and safety when the vehicle is changing lanes or navigating curves. Under normal driving conditions, the ESC system remains inactive. When the ignition is turned on, ESC activates, the warning light illuminates, and the ESC off indicator lights up for approximately 4 seconds before turning off. If the ESC function is deactivated and the ESC off button is pressed again, the system will reactivate ESC, the ESC off indicator on the dashboard will turn off, and the ESC system will continue to operate.
15
5
Share

Is the CHR equipped with an imported engine?

In the early production stages, the CHR's engine might have been imported, or it may have contained many imported components. For later production models, the engine may no longer be imported, or the number of imported parts may decrease. As production progresses, the localization rate of various components in the vehicle tends to increase. The CHR is positioned as a compact SUV, with dimensions of 4360 mm in length, 1795 mm in width, and 1555 mm in height, and a wheelbase of 2640 mm. For the interior, the overseas version of the CHR features an 8-inch multimedia touchscreen, an extremely minimalist center console button layout for optimal visual appeal, and also comes equipped with an upgraded Toyota HMI human-machine interface system as the vehicle's multimedia information system.
10
0
Share

What are the disadvantages of independent suspension?

The disadvantages of independent suspension are its complex structure, high cost, and inconvenient maintenance. Additionally, due to its complex structure, it may occupy some of the passenger space inside the vehicle. An independent suspension system is one where the wheels on each side are individually suspended under the frame or body via an elastic suspension system. Its advantages include: 1. Light weight; 2. Reduced impact on the body and improved wheel ground adhesion; 3. The use of softer springs with lower stiffness to enhance vehicle comfort; 4. Lowering the engine position and the vehicle's center of gravity, thereby improving driving stability; 5. Independent movement of left and right wheels, reducing body tilt and vibration.
19
0
Share

What is the shutdown sequence for the Volvo XC40?

Volvo XC40 shutdown sequence: 1. Press the brake to ensure the vehicle is stationary and shift the gear to N; 2. Pull up the handbrake; 3. Shift to P, then release the brake; 4. Turn off all unnecessary electrical equipment in the car; 5. Check that the gear is in P, all unnecessary electrical equipment is turned off, and the steering wheel is straightened; 6. Turn the key counterclockwise to the end, or press the one-button start switch to adjust the ignition switch position to OFF. The Volvo XC40 is the first model produced by Volvo Cars based on the advanced CMA basic modular architecture, and it is the first compact SUV in the Volvo lineup. The car has a length, width, and height of 4425 mm, 1863 mm, and 1652 mm respectively, with a wheelbase of 2702 mm.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.