What kind of oil should be used for a grass trimmer?

What to Do When the Car Stalls While Driving?

In this situation, if the road conditions ahead are good and it is possible to not stop, you can restart the vehicle. The specific steps are: 1. Quickly shift the gear lever to the neutral (N) position, turn the ignition switch to restart the engine, and once the engine starts, promptly shift the gear lever to the D position to resume normal driving. 2. Of course, if repeated attempts to start the engine fail, it indicates a more serious fault, and you should stop to inspect and repair the vehicle. Points to note: 1. Be very careful when using this method to avoid applying excessive force that could push the gear lever directly into reverse (R), which could cause significant damage to the transmission. 2. Additionally, some cars have a secondary start prevention function, requiring you to first turn the key back to the off position before restarting. Therefore, be careful not to let the steering wheel lock if the vehicle is still moving. 3. Moreover, after the engine stalls, the power assist for the brakes and steering will also fail, requiring more effort to control the vehicle. 4. If you are a novice driver, it is best to pull over and restart the car.

7

5

Share

How to Set Cruise Control on A6?

A6's cruise control switch is lever-type. Operation method: Pushing backward cancels and turns it off, pulling forward activates and resumes, lifting upward increases the set speed value, and pressing downward decreases the set speed value. Check the green icon on the speedometer to see if cruise control is on—if it's lit, it's activated. More details are as follows: 1. The Audi A6 cruise control system maintains a constant speed starting from 30km/h by adjusting engine power or activating brake intervention. The control switch is located on the left rear side of the steering wheel. 2. The cruise control system can maintain the vehicle speed on continuous, unobstructed roads without requiring constant driver input, thereby improving fuel efficiency. Locate the cruise control switch (on the right side of the steering wheel) and press it once when driving over 40 km/h to maintain that speed. 3. To cancel, press the cruise lever once, and the vehicle returns to normal driving. To restore the most recent cruise setting, lift the cruise lever upward. Push the lever forward to accelerate, pull backward to decelerate, and press the lever all the way down to the off position to deactivate the entire system.

9

4

Share

Is the Corolla's interior space small?

The Corolla's interior space is not small. The Toyota Corolla has body dimensions of 4620/1775/1480mm (length/width/height) and a wheelbase of 2700mm. It offers well-balanced performance in terms of storage space, passenger space, and trunk capacity, giving it a competitive advantage in its class. Additional details are as follows: Exterior: The Corolla features an overall stylish and sporty design. The upper grille is minimized to a single air intake, while the lower grille adopts a large-mouth design. The headlight assembly has a sharper shape with adjusted internal structure, complemented by prominent LED daytime running lights that echo the LED taillights. The rear profile remains largely unchanged, with creases on the bumper enhancing its muscular appearance, while the full-bodied design maximizes trunk space. The taillights incorporate LED light sources. Interior: The 1.2T model shows subtle changes in details, such as the replacement of polygonal air vents with circular ones on both sides of the dashboard. The chrome trim on the dashboard differs slightly in shape from the previous model, and the layout of the gearshift panel and buttons has been adjusted. Additionally, all Corolla models now come with a PM2.5 filtration system. The top-tier navigation system and the second-tier multimedia display have been upgraded, with the screen size increased to 8 inches. How is the Toyota Corolla's space? Powertrain: The Corolla is equipped with either a 1.2T turbocharged or a 1.6L naturally aspirated engine. The 1.6L engine delivers a maximum power of 122 horsepower and a peak torque of 154 Nm, paired with either a 5-speed manual or CVT transmission. The 1.2T engine produces a maximum power of 116 horsepower and a peak torque of 185 Nm, mated to either a 6-speed manual or CVT transmission. According to the Ministry of Industry and Information Technology, the 1.6L model has a combined fuel consumption of 5.9L/100km, while the 1.2T model achieves 5.4-5.8L/100km.

6

4

Share

What are the differences between the Trumpchi M8 and the Maxus G20 Plus?

Maxus G20-PLUS: Although this vehicle has certain "utility vehicle" attributes, the comfort of its seats should not be underestimated. Moreover, the seating position inside the Maxus G20PLUS is relatively high, giving a feeling of "overlooking everything from a commanding height." In terms of space, under the same conditions, testers found that the first row offers one fist and one finger of headroom; the second row provides one fist of headroom but extremely generous legroom—even with the seat moved all the way forward, there are still more than two fists of legroom. The third row offers four fingers of headroom, and notably, the Maxus G20PLUS's third row can also be adjusted forward and backward, offering high flexibility and excellent space performance. Trumpchi M8: Positioned as a mid-to-large MPV, it is a facelifted version of the GM8. Its fuel consumption is 7.1L/100km in suburban conditions, 10.6L/100km in urban conditions, and 8.4L/100km in combined conditions. In terms of the transmission system, it is paired with an AT gearbox. The power performance is not particularly strong but is sufficient for daily use.

5

1

Share

How much over the speed limit is considered speeding in highway interval speed measurement?

On highways, interval speed measurement regulations consider exceeding the speed limit by 10% as speeding. If the speed is within 10% of the limit, no penalty is imposed, only a warning text message will be sent to the driver to remind them of the speeding violation, with no points deducted or fines issued. Highways should clearly mark the speed limits for each lane, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. The maximum speed for small passenger cars on highways should not exceed 120 kilometers per hour, while other motor vehicles should not exceed 100 kilometers per hour, and motorcycles should not exceed 80 kilometers per hour. The following are the regulations regarding speeding for ordinary vehicles on highways: exceeding the speed limit by less than 10% will not result in penalties; exceeding the speed limit by 10% to less than 20% will incur a fine of 50 RMB and 3 penalty points; exceeding the speed limit by 20% to less than 30% will incur a fine of 50 RMB and 6 penalty points; exceeding the speed limit by 30% to less than 50% will incur a fine of 200 RMB and 6 penalty points; exceeding the speed limit by 50% to less than 70% will incur a fine of 1000 RMB and 12 penalty points, with the possibility of driver's license suspension; exceeding the speed limit by 70% or more will incur a fine of 2000 RMB and 12 penalty points, with the possibility of driver's license suspension. If speeding occurs on urban roads with a speed limit of less than 50 kilometers per hour, exceeding the limit by 10% to less than 20% will only result in a fine without penalty points. However, exceeding the limit by 20% to less than 50% will incur 6 penalty points and a fine for the driver. Interval speed measurement refers to the setup of two monitoring points on the same road section. By calculating the time it takes for a vehicle to pass these two points, the average speed of the vehicle is determined to infer whether the vehicle is speeding. This is the most common method of speed measurement, and the high-definition cameras on highways can accurately capture the movement of vehicles. As long as a driver exceeds the speed limit, it is highly likely to be recorded by the cameras.

18

4

Share

Can the knob shift be replaced with a gear lever shift?

Can the knob shift be replaced with a gear lever shift? It is recommended to go to a professional modification shop for the change, as general shops may not make it work well. The extended knowledge about knob shift and gear lever shift is as follows: The drawback of knob shift is that it cannot perform blind shifting like a gear lever. With a gear lever, the position and feel allow the driver to know which gear the car is in. Therefore, when using button shift, the driver must glance at it every time; otherwise, it is easy to press the wrong button. Sometimes, certain models may design the shift buttons together with the engine and transmission buttons, increasing the chance of misoperation. During driving, this can easily lead to situations like accidentally turning off the engine, posing significant safety hazards. As for the gear lever shift, it makes driving operations more convenient, simpler, and helps prevent misoperation. On the other hand, button shift effectively saves space, enhances the car's style, and uses differentiated designs for each gear, allowing the driver to distinguish the gears by feel and shape. In conclusion, both button shift and gear lever shift have their own advantages and disadvantages. As long as it suits your habits, it is the best to use.

5

0

Share

What kind of oil should be used for a grass trimmer?

What to Do When the Car Stalls While Driving?

How to Set Cruise Control on A6?

Is the Corolla's interior space small?

What are the differences between the Trumpchi M8 and the Maxus G20 Plus?

How much over the speed limit is considered speeding in highway interval speed measurement?

Can the knob shift be replaced with a gear lever shift?

How to Turn on the High Beam of Volkswagen Sagitar?

What are the differences between Volkswagen Santana and Jetta?

Can power banks be left in the car without direct sunlight?

What Causes Abnormal Noises When Using the Air Conditioner?