What kind of oil should be added to the Volkswagen Tiguan transfer case?

1 Answers
StSawyer
07/30/25 8:38am
Volkswagen Tiguan transfer case requires gear oil and hydraulic oil. Function of transfer case: It can reasonably distribute the engine's power, delivering it to the rear axle or simultaneously to both the front and rear axles. The transfer case is a device that distributes engine power, generally found only in four-wheel-drive vehicles. It allows the vehicle to switch between drive modes on stable road surfaces, such as switching to two-wheel-drive mode. Maintenance methods for transfer case: The transfer case contains specialized gear oil inside, which should be replaced regularly. It is recommended to replace it when the vehicle has traveled approximately 60,000 to 80,000 kilometers. When switching drive modes using the transfer case, it is best to do so when the vehicle is stationary to prevent wheel reaction forces from damaging the transfer case.
Was this review help?
7
4
Share
More Forum Discussions

Is It Normal for a New Car's Exhaust Pipe to Rust?

Rust on the exhaust pipe is actually a very normal phenomenon. Since the surface temperature of the exhaust pipe can become extremely high during operation, and manufacturers generally apply paint, the surface is essentially fully exposed. Over time, exposure to various acidic and alkaline substances, sewage, and other corrosive elements, combined with the high-temperature working environment, makes it inevitable for the exhaust pipe to rust. Maintenance Tips: Regular maintenance should include cleaning the drainage holes to prevent clogging. When driving in the rain or passing through deep water areas, water may seep into the exhaust pipe. Additionally, during car washing, avoid spraying water directly into the exhaust pipe. If water enters the exhaust pipe, let the engine idle for more than ten minutes to allow the water to gradually drain out.
6
2
Share

Where to Collect the Driver's License After Passing the Full-Score Exam?

After passing the full-score exam, the driver's license will be mailed to the car owner. At the same time, the demerit points will be cleared. Below is a detailed introduction about the automobile driver's license: Overview: The permission to drive a vehicle is realized through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal act with a specific format, which must be issued by a specialized authority. Driving a motor vehicle requires certain driving skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Others: The full name of the driver's license is the motor vehicle driver's license, also known as the "driving license," which is a certificate required by law for motor vehicle drivers. Driving without a license is not allowed on the road.
15
4
Share

How early can a driver's license be renewed?

Driver's license renewal procedures can be processed three months in advance. There is no significant impact if the driver's license exceeds its validity period for a short time, but if it remains unprocessed for over a year, the license will be revoked. Below is detailed information about automobile driver's licenses: Overview: The full name of a driver's license is a motor vehicle driver's license, also known as a "driver's permit," which is a certificate required by law for individuals who drive motor vehicles. Driving a motor vehicle requires certain driving skills, and those lacking these skills may cause traffic accidents if they drive recklessly. Driving without a license is prohibited. Notes: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal process that must be carried out by a specialized authority.
10
2
Share

How many times can I schedule the Theory Test (Subject 1)?

There is no limit to the number of times you can take the Theory Test (Subject 1). Each test attempt provides two opportunities to pass. If you fail both attempts, you will need to reschedule the test. The total duration of the Theory Test is 45 minutes, and the exam consists of 100 questions, including true/false and multiple-choice questions. The test questions are randomly selected and combined by the computer-based driver's test system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." The test content covers fundamental driving theory, road safety laws and regulations, traffic signals, traffic rules, and other basic knowledge, along with local regulations. The scheduling of the Theory Test is arranged by the local Vehicle Management Office. Important notes for the Theory Test: Bring and present your ID card for verification by the invigilating officer; mobile phones must be turned off upon entering the test area; no loud talking is allowed in the test area; textbooks or study materials are not permitted in the examination area (or must be kept in your bag). Test procedure: Follow the instructions of the staff and collect your driving school file in order in the waiting area. Bring and present your ID card for verification by the invigilating officer. Mobile phones must be turned off upon entering the test area. No loud talking is allowed in the test area. Textbooks or study materials are not permitted in the examination area (or must be kept in your bag). After the test, keep your ID card safe and submit your file to the "Submission Window" at the front of the examination room. Candidates who pass the test will sign under the guidance of the staff at the exit and leave the examination room. Candidates who fail the test may leave the examination room and await notification from their driving school regarding the retake schedule.
12
5
Share

Do I need to go to the DMV for an annual inspection two years after buying a new car?

New cars do not require an in-person inspection at the DMV after two years. You only need to apply for the inspection compliance mark on the Comprehensive Traffic Safety Service Management Platform. Below are detailed explanations about vehicle annual inspections: Overview: Vehicle annual inspection refers to the yearly examination of vehicles that have obtained official license plates and registration certificates, conducted according to the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. Others: For passenger vehicles used for commercial purposes, inspections are required once a year within the first five years. After five years, inspections are required every six months. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first ten years. After ten years, inspections are required every six months. Motor vehicle annual inspections are divided into initial inspections and regular inspections.
1
5
Share

Does mixing a small amount of coolant have any impact?

It is not recommended to mix coolants. However, adding a small amount of a different coolant will not affect the vehicle. If you must mix coolants, ensure they are of the same brand. Different brands of coolants may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose gets its name from having five connection points to different parts of the vehicle. Coolant flows through the five-way hose and is distributed to various parts of the car to function. If there are any signs of coolant leakage in this area, replace the hose or resecure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Continue adding clean water until the outflow is clear. Remember to remove the heater hose and drain all water from the heater core. After about an hour of draining, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop. Top up the coolant to the maximum mark "MAXT" on the reservoir.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.