What kind of oil is used in a transfer case?

What is the torque and horsepower of the Lavida?

Automobile engines have two important parameters: horsepower and torque. Horsepower refers to the maximum speed a car can achieve. Generally speaking, the higher the horsepower, the higher the top speed. For example, ordinary sedans typically have around 200 horsepower, allowing them to reach speeds of over 200 km/h, while sports cars usually have 400-500 horsepower, enabling them to reach speeds exceeding 300 km/h. Torque, on the other hand, refers to the burst power, or the ability to accelerate. For family sedans, higher horsepower usually means higher torque, resulting in faster acceleration during overtaking. The horsepower affects the car's top speed, i.e., the maximum speed. The higher the horsepower, the higher the top speed, though other factors like vehicle weight and drag coefficient also play a role. Generally, the larger the engine displacement, the higher the horsepower. However, modern technologies such as turbocharging allow smaller-displacement engines to produce higher horsepower. Some people believe that "smaller-displacement cars should be more fuel-efficient," but in reality, what matters most is suitability. The horsepower of an engine refers to its output capability, i.e., its power output. Power output is the most critical parameter for measuring vehicle performance and engine capability. When we say "this car has a lot of power," it’s often due to the engine's strong torque, which requires a higher power output. Engine displacement is the total volume of all the engine's cylinders, calculated as the product of single-cylinder displacement (Vh) and the number of cylinders (I).

4

1

Share

Can you enter the waiting zone when the light is red?

The waiting zone cannot be entered when the light is red, because the waiting zone is only for left or right turns. If a vehicle intends to turn, it can wait in the waiting zone until the red light turns green. Below are relevant details: 1. Always pay attention to road conditions: When driving, vehicles should pay more attention to road conditions. Before entering the traffic light area, the speed should be reduced in advance, and a safe distance should be maintained from the vehicle ahead. 2. Relevant regulations: Entering the left-turn waiting zone is only allowed when either the left-turn signal light, the straight signal light, or both are on. Otherwise, it constitutes running a red light, which will result in fines and penalty points.

18

5

Share

What Causes the Car Horn Sound to Become Weaker?

The reason for a car horn's sound becoming weaker may include excessive battery discharge, burnt or poor contact points, loose or poor connections at the terminals, etc. Below is a detailed introduction to car horns: 1. Introduction: The horn is the audio signal device of a car. During driving, the driver uses it to emit necessary sound signals as required or regulated, to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. 2. Working Principle: The car electric horn produces sound through the vibration of a metal diaphragm. It consists of an iron core, magnetic coil, contact points, armature, diaphragm, etc. When the driver presses the horn switch, current flows through the contact points to the coil, generating a magnetic force that pulls the armature down, forcing the diaphragm to move. The movement of the armature opens the contact points, interrupting the current and causing the magnetic force to disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate, closing the contact points again and restoring the circuit. Current flows through the contact points to the coil once more, generating magnetic force and repeating the above actions. This cycle continues, causing the diaphragm to vibrate repeatedly and produce sound.

3

2

Share

What is the Definition and Content of Daily Vehicle Maintenance?

Daily maintenance is essential for vehicles. Below are the definition and content of daily vehicle maintenance: 1. Definition: Daily maintenance refers to a type of "vehicle technical maintenance." It aims to maintain the vehicle's excellent appearance and ensure driving safety, and is performed by the driver as part of routine maintenance. The main tasks include: adhering to the "three inspections," which involve checking the vehicle's safety mechanisms and the tightness of various connections before driving, during driving, and after parking. Maintaining the "four cleanings," which means keeping the oil filter, air filter, fuel filter, and battery clean. Preventing the "four leaks," which involves avoiding water leaks, oil leaks, air leaks, and electrical leaks, while keeping the vehicle clean and tidy. 2. Content: Cleaning the vehicle's exterior and engine to maintain a neat appearance; inspecting and replenishing lubricants (grease), fuel, coolant, brake fluid, various working fluids, and tire pressure; inspecting and tightening safety components such as brakes, steering, transmission, suspension, lights, signals, and the engine's operating state to ensure safe driving.

1

0

Share

What Causes a Hot Engine to Fail to Start?

Reasons: Engine carbon buildup, intake air temperature sensor, fuel quality, damaged carbon canister solenoid valve, fuel injector leakage, etc. 1. Fuel injector leakage: While fuel injectors normally spray fuel, leakage constitutes additional fuel supply. The more severe the leakage, the richer the air-fuel mixture becomes, making hot starts difficult. 2. Damaged carbon canister solenoid valve: During a hot start, fuel atomization is normally adequate without additional fuel vapor. If the carbon canister continues supplying vapor to the intake, it will over-enrich the mixture, causing starting difficulties. 3. Fuel quality: After a hot engine shutdown, the engine bay remains quite warm. If the fuel is highly volatile, it can create excessive vapor pressure in the fuel rail. When this pressure exceeds the fuel system pressure, vapor lock occurs, resulting in overly lean fuel vapor from the injectors and starting problems. 4. Intake air temperature sensor: Similar to the coolant temperature sensor, this sensor adjusts fuel injection. However, while a faulty coolant sensor causes cold-start issues, a faulty intake air temperature sensor leads to hot-start difficulties. 5. Engine carbon buildup: Carbon deposits strongly adsorb gasoline. Excessive carbon on intake valves, throttle bodies, or pistons can absorb fuel, creating an overly lean mixture that affects starting. This issue also occurs during cold starts.

15

2

Share

What is the concept of Michelin rating?

Michelin rating refers to the high quality and durability of car tires. The following is an introduction to Michelin: 1. Basic information: Michelin (MICHELIN) is a tire manufacturing company founded in 1889 in Clermont-Ferrand, France. In 1898, the Michelin Man "Bibendum" was born. In 1946, the radial tire was invented. In 1993, the C3M tire manufacturing process was invented. In 1995, the first joint venture in China, "Michelin Shenyang Tire Co., Ltd.", was established. In 1996, the PAX-System tire was invented. 2. Fortune ranking: In May 2021, the "2021 Forbes Global 2000" was released, with Michelin ranking 470th.

17

5

Share

What kind of oil is used in a transfer case?

What is the torque and horsepower of the Lavida?

Can you enter the waiting zone when the light is red?

What Causes the Car Horn Sound to Become Weaker?

What is the Definition and Content of Daily Vehicle Maintenance?

What Causes a Hot Engine to Fail to Start?

What is the concept of Michelin rating?

How to Control the Brake and Clutch at Traffic Lights?

What does the lim button on a BMW mean?

What Grit Sandpaper is Used for Car Glass Polishing?

Are Michelin Tires Run-Flat Tires?