What kind of oil does the Corolla use?

What Causes the Transmission to Fail to Engage Gear?

Reasons why the transmission fails to engage gear: 1. Clutch cable failure: Some manual transmission vehicles use cables to control the clutch. The outer sheath of the cable can easily crack, making it impossible to control the clutch for gear shifting. This issue is relatively simple to fix—just replace the cable. 2. Clutch slippage: This usually occurs when components on the vehicle's clutch wear out. Severe wear on the clutch pressure plate, friction disc, or release bearing can cause the transmission to fail to engage gear while driving. 3. Clutch master cylinder failure: The clutch hydraulic master cylinder may experience pressure loss or oil leakage during use, leading to difficulty engaging gears when pressing the clutch. In such cases, the clutch master cylinder should be replaced at a repair shop, followed by a bleeding operation. 4. Transmission failure: Insufficient transmission fluid, stuck gearshift mechanism, or a malfunctioning gear or shift fork can all result in difficulty shifting or the inability to engage gears.

9

2

Share

Is Transmission Control Module Failure Serious?

Transmission control module failure is very serious. Here is information about the transmission: Introduction to transmission: An automotive component that changes the speed ratio and direction of motion. Definition of transmission: A gearbox that alters the transmission ratio and direction of motion, located between the clutch and the central drive. Functions of the transmission: (1) Change the transmission ratio between the engine and the wheels, allowing the engine to operate under optimal conditions, expanding the torque and speed transmitted to the drive wheels, and achieving different speeds. (2) Enable the vehicle to move in reverse. (3) Provide a neutral gear setting.

16

0

Share

What are the states and performances of drivers under different levels of fatigue?

Different levels of fatigue lead to different states and performances in drivers. Mild fatigue: Drivers may yawn frequently, have heavy eyelids, and experience untimely or inaccurate gear shifting; Moderate fatigue: Drivers tend to lose focus, have slower reactions, and sometimes even forget operations; Severe fatigue: Drivers often operate subconsciously or experience short periods of sleep, and may lose control of the vehicle in severe cases. Additional information is as follows: Driving fatigue refers to the phenomenon where drivers experience a decline in driving skills due to physiological and psychological dysfunction after prolonged continuous driving. Poor or insufficient sleep quality and long hours of driving can easily lead to fatigue.

3

2

Share

Does accidentally starting the car in gear have any impact on the vehicle?

It depends on the situation. Normally, if the clutch is fully depressed, starting the car in gear won't have any impact. However, if the clutch is not depressed or not fully engaged, directly starting the car can damage the starter, brake system, and may cause the vehicle to lurch forward, increasing the risk of an accident. When starting on a steep slope, engaging the first gear is necessary to prevent the vehicle from rolling back, but the clutch must still be depressed while starting. Additional information: For manual transmission vehicles, it's recommended to depress both the clutch and brake pedals when starting. Depressing the clutch pedal while starting is equivalent to starting in neutral, as it cuts off the power transmission, and strictly speaking, it won't harm the vehicle.

8

5

Share

What Does Label Removal Mean?

It means the device is currently unavailable and needs to be reinstalled and reactivated at the original processing point or any expressway ETC service office. Here is additional information: Most ETC devices display "label removal" because users dismantled the ETC equipment to replace the battery. Recovery method: The anti-tamper lever on the back of the ETC electronic tag is essentially a reset button switch. Once the button pops out, the information stored in the ETC device will be erased, requiring reactivation to input the data again. You can try the ETC self-service activation method. If that doesn't work, you'll need to take it to an ETC service point or ETC service center for reactivation or cancellation, and replace it with a new ETC electronic tag.

7

4

Share

What Causes Excessive Transmission Oil Temperature?

Here are the reasons for excessive transmission oil temperature: Transmission oil level too high or too low: Check the oil level in the transmission oil pan and adjust the transmission oil to the specified level. Damage to the transmission pump or blockage in the oil suction line: The transmission pump controls the distribution of high-pressure oil generated by the torque converter through the transmission distribution valve to the second shaft assembly, enabling the loader to move forward and backward. Damage to the transmission pump can lead to insufficient oil supply to the transmission. With prolonged use of the loader, increased wear can cause internal leakage in the transmission pump, resulting in insufficient transmission pressure and mechanical efficiency. This can lead to poor oil supply in the suction line, preventing the oil from lubricating moving parts and increasing friction, which also causes system overheating. It is important to note that air leaks or blockages in the transmission pump suction line can also cause insufficient flow, leading to excessively high oil temperature.

3

4

Share

What kind of oil does the Corolla use?

What Causes the Transmission to Fail to Engage Gear?

Is Transmission Control Module Failure Serious?

What are the states and performances of drivers under different levels of fatigue?

Does accidentally starting the car in gear have any impact on the vehicle?

What Does Label Removal Mean?

What Causes Excessive Transmission Oil Temperature?

Is it easy to repair a transmission oil leak caused by a stone impact?

What are the consequences of not repairing a damaged transmission flywheel?

Can You Still Drive When the Transmission Warning Light Comes On?

What's the matter with water in the transmission?