What kind of marking is composed of white dashed lines and triangular zone markings?

1 Answers
SanRiley
07/29/25 7:08pm
The marking composed of white dashed lines and triangular zone markings is called a road entrance marking. It is primarily used at highway entrances to guide traffic flow, with arrow directions distinguishing between entrance and exit lanes. Functions of road entrance markings: Road entrance markings are white and generally consist of longitudinal markings at the entrance and triangular zone markings. They are used to guide the trajectory of entering vehicles, ensuring safe merging and reducing the possibility of collisions with protruding curbs. Functions of white dashed lines in different positions: White dashed lines: When painted on road sections, they serve to separate same-direction traffic flows or act as safe driving distance indicators; when painted at intersections, they guide vehicle movement.
Was this review help?
20
4
Share
More Forum Discussions

What Causes the Car Brake Warning Light to Illuminate?

The reasons for the parking brake warning light to illuminate are as follows: 1. The handbrake is not fully released: Although the handbrake is released, it may not press the switch properly. In this case, the driver should repeatedly confirm whether the handbrake is fully engaged. 2. Lack of brake fluid: Insufficient brake fluid can also cause the handbrake light to illuminate. When the brake fluid level falls below the safety line, the handbrake light may stay on constantly. Additionally, when driving uphill or braking sharply, the steep angle and fluid movement can trigger a false alarm from the fluid level indicator. 3. Worn brake pads or foreign objects in the brake pads: These issues can lead to insufficient braking force, longer braking distances, or a spongy brake pedal, resulting in the handbrake light staying on.
6
3
Share

Why can't the windows of Volkswagen Golf 4 be raised or lowered?

The reasons why the windows of Volkswagen Golf 4 cannot be raised or lowered are as follows: Window lift motor damage or poor contact of the electrical control wiring harness: If there is a burnt smell or abnormal noise in the door panel when the window button is pressed for a long time, it is likely that the window lift motor components are damaged. In this case, it is recommended to directly go to a 4S store or auto repair shop to replace the window lift motor. Motor overheating protection: To protect the power supply circuit, window lift motors are generally equipped with an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, resulting in window lift failure. Excessive resistance in the glass guide channel: The door glass guide channel is a detail that is easily overlooked. During use, dust will accumulate in the glass guide channel, increasing the resistance, which may make it difficult to raise the glass over time.
16
0
Share

What is the ground clearance of the Audi A4L?

The ground clearance of the Audi A4L is 107mm. Here is the relevant content introduction: The entire chassis of the Audi A4L is equipped with complete protective plates, and the heat insulation treatment of the exhaust pipe is also thorough, which facilitates rapid airflow passage, resulting in better overall aerodynamic performance. Both front and rear brakes use disc brake structures, with the front brake caliper adopting a fixed four-piston design. The dimensions of the Audi A4L are 4818mm in length, 1843mm in width, and 1432mm in height, with a wheelbase of 2908mm. The interior of this car continues the Audi family-style design, featuring exquisite craftsmanship and high-quality materials. The Audi A4L is also equipped with the Audi dynamic steering system, which can adjust the gear ratio based on driving speed and the selected Audi driving mode.
14
3
Share

Where is the sunroof drain pipe of Haval H9 located?

Haval H9's sunroof drain pipe is located in the A-pillar. Here are some related details: 1. A leaking sunroof can cause malfunctions in many electronic devices inside the car. To prevent clogging of the sunroof drain holes, it's advisable to clean the dust around the sunroof drain holes during maintenance. 2. There is a sealant ring around the sunroof glass of the car. During rain, some water may enter the sunroof track through this sealant ring, and this water can be drained outside the car through the drain holes on the sunroof track. If the sunroof drain holes are clogged, rainwater may accumulate on the sunroof track and enter the interior of the car. To check if the sunroof drain holes are clogged, you can simply open the sunroof and pour a small amount of water onto the sunroof track. If the water drains smoothly, then there is no clogging.
4
5
Share

How are the letters arranged on Jiangsu license plates?

Jiangsu license plate letter arrangement is primarily based on the chronological order of city or provincial-level city establishment, as follows: 1. The first character is a Chinese character representing the provincial-level administrative region where the vehicle owner resides, which is the abbreviation of provinces, municipalities directly under the central government, or autonomous regions. For example, Jiangsu is abbreviated as 'Su'. 2. The second character of the license plate is an English letter representing the prefecture-level administrative region where the vehicle owner resides, serving as the letter code for prefecture-level cities, regions, autonomous prefectures, or leagues. This is generally determined by the vehicle management office based on the rankings of prefecture-level administrative regions assigned by the provincial vehicle management office. For example, 'Su A' represents Nanjing City, and 'Su B' represents Wuxi City.
15
1
Share

What is the parking sequence for an automatic transmission car?

The parking sequence for an automatic transmission car is: 1. Step on the brake pedal to slow down and come to a stop. When driving in D gear, gently press the brake pedal to decelerate until the car stops. 2. After coming to a complete stop, shift into N gear. 3. Engage the handbrake and release the foot brake. 4. Release the foot brake and confirm that the vehicle is stationary. 5. Press the foot brake again, and after the car has stopped, shift the gear to P. 6. Turn off the engine and exit the vehicle. If parking on a slope, first shift the gear to N, then press the brake, engage the handbrake, wait for the car to stabilize, then shift the gear to P, release the foot brake, and finally turn off the engine.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.