What kind of liquid is sprayed during car window tinting?

1 Answers
IanLynn
07/29/25 5:56pm
During car window tinting, specialized tint film cleaning solution and installation fluid are sprayed, diluted with purified water, to achieve strong adhesion between the film and glass. The functions of window tint film include: 1. Blocking heat generated by infrared rays; 2. Filtering ultraviolet rays to prevent skin damage; 3. Providing safety and anti-explosion protection, as the film has excellent tear-resistant and puncture-proof capabilities; 4. Maintaining privacy and security; 5. Reducing air conditioning load; 6. Minimizing accidents caused by glare factors. The installation method for window tint film involves: 1. Adding interior protection to the vehicle; 2. Cutting the automotive sun film according to window dimensions; 3. Wiping and cleaning the front and rear windshield glass; 4. Using a heat gun to shape the film; 5. Performing fine trimming of the film after heat shaping is completed.
Was this review help?
19
3
Share
More Forum Discussions

What is the difference between a guide line and a waiting zone line?

The difference between a guide line and a waiting zone line is: The left-turn waiting zone line is marked with arrow indicators within the lane and has a white stop line at the end. Left-turning vehicles must wait here, guiding them to enter the left-turn waiting zone during the straight-through phase, extending into the intersection without obstructing the normal flow of straight-through traffic, thereby improving traffic efficiency. The guide line allows left-turning vehicles to proceed in an orderly manner in this lane, a design that enhances intersection efficiency. Introduction: The left-turn guide line demarcates the boundary between left-turning motor vehicles and non-motor vehicles, primarily used at irregularly shaped intersections. The left-turn guide line is white, dashed, with 2m solid segments and 2m gaps, and a width of 15cm. It connects adjacent left-turn lanes and non-motorized lanes with a circular curve. Left-turning motor vehicles travel to the left of the guide line, while non-motorized vehicles travel to the right. Precautions: When entering the waiting zone for a left turn, do not cross the zebra crossing. The left-turn waiting zone is exclusively for left-turning vehicles. When the straight-through signal is green, even if the left-turn signal is red, left-turning vehicles are permitted to enter the waiting zone and proceed only when the left-turn signal turns green.
4
0
Share

Can a New Car Be Replaced Due to Abnormal Noises?

It is unlikely to directly replace a new car due to abnormal noises, but the 4S store has the responsibility and obligation to eliminate the fault. During the warranty period, it is necessary to promptly go to the car after-sales service for handling. Abnormal noises from the car body: First, check whether there are unfixed, easily rolling objects in the trunk or rear seats that may cause noise, and eliminate the possibility of noise caused by improperly fixed items. If abnormal noises are found to be caused by friction at the doors or windows, methods such as applying adhesive tape to the doors and windows or padding rubber at the friction points may reduce or eliminate the noises, but these solutions only address the symptoms, not the root cause. If none of the above issues are found, it is necessary to go to a regular repair shop for inspection and troubleshooting. Abnormal noises from the engine: Abnormal noises from the engine indicate that the technical state of a certain mechanism in the engine has changed. This is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some abnormal noises may even predict potential catastrophic damage to the engine. Therefore, when abnormal noises occur in the engine, timely repairs should be carried out to prevent the fault from expanding. Abnormal noises from the transmission: The transmission has many parts, and the causes of abnormal noises are relatively complex. Check whether the noise is related to specific speeds, such as some planetary gears making noticeable noises at around 50Km/h. Check whether the noise is related to certain gears, which is very important for judging transmission faults. If a certain gear makes noise, it is definitely related to the components affecting the transmission of that gear; if all gears make noise, it is often a fault with the constant-mesh gear shaft or insufficient oil in the transmission. Check whether the noise is related to specific actions, such as shifting gears, starting, rapid acceleration, rapid deceleration, turning, etc., which are effective means for judging abnormal noises. Among these, changing speed and direction are particularly important for determining rear axle faults.
12
4
Share

Can You Make a U-Turn Without Waiting for the Red Light?

If the gap is marked with a dashed line, making a U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly, provided it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with a solid line, then making a U-turn requires crossing the pedestrian crossing and is subject to traffic signals. If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk, not reaching the centerline of the road. Vehicles on the left side of the road should slow down and proceed cautiously, ensuring safety while allowing pedestrians to cross. Pedestrians waiting outside the boundary line between motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed cautiously, ensuring safety while allowing them to cross. If pedestrians cross the boundary line between motorized and non-motorized lanes, vehicles failing to stop and yield are committing a traffic violation and should be penalized. When pedestrians enter the motorized lane along the crosswalk, vehicles in the adjacent lane must slow down and proceed cautiously, ensuring safety while allowing them to cross. If the vehicle in the original lane fails to stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. If vehicles fail to stop and yield, it is a violation and should be penalized. Pedestrians crossing the centerline into the motorized lane. If vehicles fail to stop and yield, it is a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the middle area must be yielded to. Vehicles must slow down and proceed cautiously, ensuring safety while allowing them to cross. Cases where U-turns are allowed: Intersections with U-turn signs permit U-turns: If there is a clear U-turn sign at the intersection, you can make a U-turn. If there is a U-turn signal light, follow its instructions. If there is no signal light, make the U-turn based on the situation, ensuring it does not interfere with other vehicles or pedestrians. Intersections without explicit "No U-turn" or "No Left Turn" signs allow U-turns: If there is no explicit prohibition, U-turns are permitted. "No explicit prohibition" means the intersection lacks signs like "No U-turn" or "No Left Turn," and the centerline is not solid. In such cases, U-turns are allowed. Yellow grid lines also permit U-turns: Yellow grid lines indicate no-parking zones, typically placed at intersections prone to congestion due to temporary stops, important facility entrances, or other designated areas. Parking on these lines (including waiting at traffic lights) is a violation. However, while stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. Yellow grid lines without barriers are equivalent to "U-turn permitted." If "No Left Turn" and "U-turn Permitted" signs appear together: U-turns are allowed, but left turns are prohibited. Note that "No U-turn" is not the same as "No Left Turn." Things to note when making a U-turn at an intersection: Check road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, even if "No U-turn" is not mentioned, U-turns are not allowed at that intersection, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with their movement; otherwise, you will bear full responsibility for any accidents. Near the intersection stop line, lanes often have guiding arrows indicating permitted movements. The leftmost lane is not always for left turns only. If it has a straight arrow, U-turns are prohibited even if no explicit "No U-turn" signs are present.
9
1
Share

What to Do When Car Key Buttons Malfunction?

There are several solutions for malfunctioning car key buttons: 1. First, check if the battery has poor contact, then inspect whether the buttons are damaged. If some buttons trigger the indicator light while others don't, it's likely a button malfunction requiring repair. 2. If the remote control is functioning properly, the issue may be insufficient battery power—replace the battery, ensuring correct polarity during installation. 3. Use the spare mechanical key. Some car models hide the keyhole for aesthetic purposes—simply remove the decorative cover to access it.
5
4
Share

What to Do When One Car Window Won't Close?

Here are the solutions for when one car window won't close: 1. If foreign objects are stuck in the window glass, you need to remove the door's interior trim panel to extract the obstruction. During regular use, always be mindful of small cards or items lodged between the door and window glass—ensure these are removed before operating the window. 2. If the electric window regulator malfunctions, the door's interior trim panel must be removed to replace the electric window regulator. 3. Over time, car windows may exhibit slower movement or sticking during operation due to aging window seal strips. In this case, replace the window seal strips.
15
0
Share

What does car adaptive headlight mean?

Adaptive headlights, also known as adaptive lighting systems or AFS (Adaptive Front-lighting System), refer to a vehicle lighting feature. Here is more information about car adaptive headlights: 1. Adaptive headlights can rotate a certain angle in the direction of your turn when the car is turning, expanding the field of vision. Conventional headlights have blind spots during turns, which can be dangerous. 2. Adaptive headlights can automatically adjust the deflection of the headlights based on driving speed and steering angle to illuminate the "unreached" area in advance, providing all-round safety lighting to ensure the driver has optimal visibility at all times.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.