···
Log in / Register

What Kind of License Plate Does a New Energy Vehicle Use?

4 Answers
VanCarter
07/29/25 4:20pm
New energy vehicles must use green license plates. The following are the conditions for applying for a new energy license plate: 1. The company must be registered in China and have the appropriate scale of self-owned funds and financing capabilities to match the project investment. 2. The applying company can only produce "pure electric passenger vehicles," including pure electric and extended-range (series hybrid with external charging capability) passenger vehicles, which must meet relevant national standards. The following is an introduction to the special license plates for new energy vehicles: 1. The outer dimensions of the special license plate for new energy vehicles are 480mm × 140mm. 2. The special license plate for small new energy vehicles is gradient green. 3. The special license plate for large new energy vehicles is a combination of yellow and green. 4. The first character of the special license plate for small new energy vehicles uses the letters D or F (D represents pure electric new energy vehicles, F represents non-pure electric new energy vehicles). 5. The sixth character of the special license plate for large new energy vehicles uses the letters D or F (D represents pure electric new energy vehicles, F represents non-pure electric new energy vehicles).
Was this review help?
1
0
Share
OAnderson
08/14/25 5:08am
I'm particularly interested in the license plates of new energy vehicles, which typically feature green plates and are quite common domestically, distinguishing them from traditional blue plates. The green background with white or yellow characters is designed to be eye-catching, primarily to promote energy conservation and environmental protection. Technically speaking, pure electric vehicles have plates starting with 'D', while plug-in hybrids start with 'F', facilitating traffic management. Identification is much easier; for instance, on highways, it's quick to distinguish which vehicles are new energy and thus eligible for road priority. I believe this license plate system aids in combating smog and improving air purification, with the government implementing this policy to encourage the public to opt for green transportation. The plate application process has been simplified, speeding up approvals and saving a lot of queuing time. In the long run, green plates might also integrate charging data to support the development of smart cities.
Was this review help?
11
3
Share
Expand All
VanGabriella
10/12/25 7:13am
As an experienced driver, I'd like to share details about green license plates for new energy vehicles. In mainland China, new energy vehicles directly receive green license plates, which is a truly convenient policy: in major cities like Beijing and Shanghai, you can apply directly without participating in the lottery system, while blue plates for fuel vehicles require long waiting queues. The plates feature special codes, such as pure electric vehicles starting with 'D', to help identify vehicle types. Owners enjoy privileges like unrestricted access in certain zones and discounted parking fees. Personally, I find green plates hassle-free and connected to policy benefits like purchase tax exemptions. This encourages more people to switch to new energy vehicles, reducing pollution emissions. In future trends, these plates may be upgraded to support more smart features, making travel more efficient.
Was this review help?
6
2
Share
Expand All
DiCharlie
11/25/25 8:16am
New energy vehicle license plates are green, which my friend experienced firsthand when he picked up his new car. His pure electric vehicle's license plate features white characters on a bright green background, making it very eye-catching. The registration process was straightforward: after submitting the required documents at the vehicle management office, he received it quickly without the hassle associated with fuel-powered vehicles. The design of the license plate is beneficial for daily use, such as driving in the city without being troubled by traffic restrictions, and quick identification at charging stations, reducing long queues. I think these small green plates represent the concept of environmental protection, making people more willing to pay attention to energy conservation and emission reduction when they see them on the road. My friend also mentioned insurance discounts because the license plate identifies the vehicle as new energy. In short, choosing a green plate makes life more convenient.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Is it illegal to raise the chassis?

Arbitrarily raising the chassis is illegal. Here is some relevant information about the chassis: Introduction: The chassis refers to the combination of the transmission system, running system, steering system, and braking system on a car. It supports and installs the car's engine and its various components and assemblies, forming the overall shape of the car, bearing the engine's power, and ensuring normal operation. Function: The role of the chassis is to support and install the car's engine and its various components and assemblies, forming the overall shape of the car, and receiving the engine's power to make the car move and ensure normal operation. At the same time, a good chassis can ensure the driver's life safety.
12
0
Share

What Causes a Car to Lose Power When Accelerating?

Reasons why a car loses power when accelerating include: Fuel system blockage: First, check if the fuel filter is clogged, whether the fuel pump pressure is sufficient, and if the fuel injectors are blocked. Exhaust system blockage: Inspect the catalytic converter and the entire exhaust pipe for any blockages. Possible excessive carbon buildup in the throttle body: Check the idle position sensor and whether the air flow meter is damaged. Here are precautions when operating the accelerator: When driving normally, do not rest your foot on the clutch pedal. While driving, minimize the time spent in the semi-clutch state to prevent burning out the clutch friction plates. Do not release the clutch too abruptly. The first gear should be the slowest, while other forward gears can be slightly faster. When starting in first gear, press the clutch pedal all the way down. When shifting up, press the clutch pedal until the friction plates disengage, then shift—there’s no need to press it all the way down again. Solutions: Check the fuel pump in the tank to see if it is functioning properly. Remove the rear seat, open the fuel tank, and inspect the fuel pump. Excessive impurities in the pump may prevent fuel from being drawn in. Blockage in the intake system, such as the air filter. Inspect the intake system and seek professional repairs. Check if the battery is the issue. Insufficient battery power may cause unstable voltage output. The solution is to clean the battery regularly and replenish the electrolyte. Incorrect valve timing, such as poorly sealed intake or exhaust valves. The solution is to clean the throttle body or add a fuel system cleaner additive when refueling.
5
5
Share

What is the complete explanation of the fault lights on the Delong X3000 dashboard?

Here are all the fault lights for the Delong X3000: Six analog gauges and one LCD display: speedometer, tachometer, fuel gauge, water temperature gauge, air pressure gauge 1, and air pressure gauge 2 are pointer-type gauges. Mileage, oil pressure gauge, voltage gauge, urea level, LNG gas level and CNG gas level, vehicle driving signals, etc., are displayed on the LCD. LCD display: shows oil pressure gauge, voltage gauge, urea level, short mileage (Ttip)/total mileage (ODO), current fuel consumption, comprehensive fuel consumption, cumulative engine fuel consumption, engine working hours, clock and date, cruise speed, gear information, and faults. Related operations: In the trip mileage interface, you can reset it by holding the left button for more than 2 seconds; the engine type can be selected via button operation when the dashboard is powered on; the menu (including language, unit, parameter query, factory settings) can be set via button operation.
4
5
Share

What is the trick to prevent a motorcycle from stalling when starting on an uphill slope?

When downshifting on an uphill slope with a motorcycle, the clutch release operation must be done smoothly in one go to avoid engine idling or stalling. Below is relevant information about stalling: Causes of stalling: Automatic transmission models: Automatic transmission models are less likely to stall, whereas manual transmission models may stall frequently due to insufficient driving skills. However, it is not impossible for automatic transmission vehicles to stall, mainly caused by using low-quality fuel leading to engine carbon buildup and stalling. Precautions: For automatic transmission vehicles stalling, the primary cause is the use of substandard fuel. One should refuel at reputable, larger gas stations with higher-grade fuel, such as using 97-octane gasoline. Although it is more expensive, it ensures a longer lifespan for the vehicle and better driving performance.
5
1
Share

What are the causes of car air conditioning cooling failure?

The causes of car air conditioning cooling failure include: clogged condenser fins, insufficient air conditioning compressor pressure, and clogged evaporator fins. Below are detailed explanations of the causes of air conditioning cooling failure: Clogged condenser fins causing excessive system pressure: The air conditioning system operates under pressure because the compressor components are pressurizing. When too much refrigerant is added or there is a blockage in the pipeline, it can lead to excessive system pressure. In such cases, the control system will disconnect the compressor's electromagnetic clutch to shut down the compressor, preventing further pressure increases that could damage the system. At this point, the compressor does not operate smoothly, and the air conditioning will not cool. The solution is simple: measure the system pressure, confirm if it exceeds the standard, and then release some refrigerant to restore normal pressure. Insufficient air conditioning compressor pressure: The compressor is the core component of the air conditioning system. Abnormal refrigerant pressure, circuit faults, damaged temperature sensors, or loose belts can all cause compressor malfunctions, leading to insufficient compressor pressure and affecting cooling performance. Clogged evaporator fins: If the evaporator is too dirty, it reduces air flow and heat exchange efficiency. The air may not be cool at high fan speeds but normal at low speeds. The condenser is located at the front of the car, placed alongside the cooling system radiator, and is about half the size of the radiator. Some cars have two fans at the front, one for the car's cooling system and the other for the condenser. If the condenser is too dirty, its cooling efficiency will decrease, naturally lowering the refrigeration efficiency.
8
5
Share

Can the Exhaust Valve Be Closed for a Long Time?

It is best not to keep the exhaust valve closed for a long time. Here is some relevant information about the exhaust valve: Introduction: The exhaust valve is a component in a turbocharged engine system that separates exhaust gases from the turbine. The separation of exhaust gases reduces the speed of the turbine, which in turn lowers the speed of the compressor. Working Principle: During the exhaust state, the float, due to gravity, pulls one end of the lever downward, causing the lever to tilt. At this point, a gap appears between the lever and the exhaust port, allowing air to escape through this gap. As the air is expelled, the water level rises, and the float, buoyed by the water's buoyancy, begins to rise. The sealing end of the lever gradually presses against the exhaust port until it is completely blocked. At this stage, the exhaust valve is fully closed.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.