What kind of glue is good for bonding car bumpers?

1 Answers
MacTucker
07/30/25 4:53am
AB glue is good for bonding car bumpers. The functions of the bumper: 1. Safety protection; 2. Mitigating external impact; 3. Protecting pedestrians; 4. Decorative purpose; 5. Improving the vehicle's aerodynamics. The bumper consists of an outer panel, cushioning material, and a crossbeam. The process of bumper painting is: 1. Clean the bumper; 2. Dry the moisture; 3. Spray the surface; 4. Sand and wipe clean; 5. Flame treatment; 6. Electrostatic dust removal; 7. Spray painting operation; 8. Spray gray primer; 9. Spray the pre-mixed color paint, then spray clear gloss paint, polish after baking.
Was this review help?
17
5
Share
More Forum Discussions

How to Adjust the Time on the Passat Dashboard?

Method to adjust the time on the Passat dashboard: 1. Press the vehicle's one-touch start button to start the vehicle; 2. Locate the SET button on the dashboard to begin adjusting the time; 3. Use the volume adjustment buttons on the left side of the multifunction steering wheel to increase or decrease the time, adjusting it to the correct display; 4. Press the OK button on the right side of the multifunction steering wheel to confirm the time adjustment and return to the main interface. The Passat is a front-wheel-drive sedan powered by a water-cooled engine, with dimensions of 4870 mm in length, 1834 mm in width, and 1472 mm in height, and a wheelbase of 2803 mm. In terms of suspension, the Passat features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
4
3
Share

Which country is Bentley from?

Bentley is from the UK and is currently under the Volkswagen Group in Germany. Bentley is a British luxury car brand headquartered in Crewe, England. The Bentley logo features smooth and simple lines forming a pair of flying wings, with the letter "B" in the middle representing the first letter of the founder's name, Bentley, giving the brand a regal and noble aura while also commemorating its designer. The Bentley Mulsanne is a flagship luxury car launched by Bentley Motors in the UK, with dimensions of 5575mm in length, 1926mm in width, and 1521mm in height, and a wheelbase of 3266mm. The interior of the Bentley Mulsanne is equipped with advanced technologies such as Bluetooth communication, SIM card reader, satellite navigation, and a 3G network-based MMI human-machine operating system, along with an 8-inch touchscreen, a built-in 40GB hard drive multimedia system, and a standard 14-speaker audio system for entertainment.
8
1
Share

What are the reasons for a diesel generator failing to start?

Reasons for a diesel generator failing to start: 1. Untimely lubrication of friction surfaces; 2. Damage to the lubricating oil film on the cylinder wall; 3. Corrosion by acidic substances. The normal temperature of the transmission part is often maintained by the heat generated from the friction between parts and oil stirring. If the temperature rises too slowly, gears and bearings will not be sufficiently lubricated, leading to increased wear. This not only raises fuel consumption but also reduces engine power. A diesel generator is a small-scale power generation device that uses diesel as fuel and a diesel engine as the prime mover to drive the generator. The complete unit generally consists of components such as the diesel engine, generator, control box, fuel tank, starting and control battery, protection devices, and emergency cabinet.
1
3
Share

What is the tire model of the Sagitar?

The tire model of the Sagitar is 205/60R16. Tires are circular elastic rubber products installed on various vehicles or machinery for ground rolling, typically mounted on metal rims. The Sagitar is a compact 4-door, 5-seater sedan with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50L. The Sagitar is equipped with a 1.2T turbocharged engine and a 5-speed manual transmission, delivering a maximum power of 85 kW and a maximum torque of 175 N·m. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
1
3
Share

What is the AUX in a car used for?

AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, audio from electronic devices can be transmitted through the headphone jack and AUX interface to the car audio system, allowing the audio to be played through the car's audio broadcasting facilities. The USB interface can be used to insert a USB drive for audio playback. To use it, connect one end to the AUX interface and the other end to devices like smartphones, MP3 players, or MP4 players. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is typically a 3.5mm standard headphone jack). Aux is short for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. These can be used for special applications, such as additional audio output or input. Such backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting to a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are suited to different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically impossible in user mode, such as initialization, restoring default settings, or correcting abnormal user modes. It provides a fixed port for the device, which can function as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup for hardware products can be achieved. Note: When using the AUX interface, make sure to buy the correct connecting cable and avoid plugging the audio cable into the wrong port. It's best to follow the steps outlined in the product's user manual. If you're still unsure, you can consult the product's official website or call for assistance.
2
4
Share

What is the 0-100 km/h acceleration time of the Porsche Taycan?

The 0-100 km/h acceleration time of the Porsche Taycan varies by model: 1. The rear-wheel-drive version accelerates from 0-100 km/h in 5.4 seconds; 2. The Turbo version achieves it in 3.2 seconds; 3. The 4S model completes it in 4 seconds; 4. The Turbo S accomplishes it in 2.8 seconds. The Porsche Taycan is a mid-to-large-sized 4-door, 4-seater sedan with body dimensions of 4963mm in length, 1966mm in width, 1395mm in height, and a wheelbase of 2900mm. The Taycan is equipped with a permanent magnet or synchronous 409-horsepower single motor and a 2-speed automatic transmission. The rear motor delivers a maximum power of 300 kW and a maximum torque of 345 Nm. It features a rear-engine, rear-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.