What kind of fuel should be used for the Mercedes-Benz E300?

2 Answers
VonStella
08/31/25 5:37am
Mercedes-Benz E300 manufacturer requires the use of 95-octane or higher gasoline that meets national standards. In fact, the Mercedes-Benz E-Class can use either 92-octane or 98-octane gasoline. From the perspective of fuel economy, there is not much difference between the two. Actually, for a car like the Mercedes-Benz E-Class, there is really no need to use 98-octane gasoline; 95-octane is sufficient, and using a higher octane rating may not be beneficial. Below is the relevant introduction: 1. Octane rating: Although higher octane gasoline has better anti-knock performance, it does not mean that the highest 98-octane gasoline is suitable for all cars. If the engine is designed to use a minimum octane rating of 95, then 98-octane gasoline can also be used. 2. Impact of excessively high octane rating: For example, the Mercedes-Benz E-Class is designed for a minimum of 95-octane. Using 98-octane gasoline may result in incomplete combustion of the fuel, which not only wastes the energy in the fuel but also increases carbon deposits.
Was this review help?
11
5
Share
DelJace
09/13/25 2:05am
After driving the Mercedes-Benz E300 for so many years, I've concluded that fuel quality is truly crucial. This car should be filled with 95 or 98 octane gasoline, and never opt for 92 octane to save money, as it may cause engine knocking, reduced power, and significant long-term damage. I personally tried lower-octane fuel a few times and experienced noticeable acceleration hesitation. Later, I consistently used 95 octane or higher, and the car's performance returned to smooth operation. The Mercedes official manual also emphasizes that higher-octane fuel improves combustion efficiency and reduces carbon buildup. Regularly check the oil pressure after refueling to ensure it's within the normal range, and be extra careful before long trips. Choose reputable gas stations to ensure fuel purity, making your drive both safe and comfortable.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty ignition coil in an old Jetta?

There are three main symptoms of ignition coil failure: short circuit, open circuit, or grounding of the ignition coil winding; surface discharge; and insulation aging. Here is a related introduction about the igniter: 1. Composition: The igniter is mainly composed of a power source, ignition coil, distributor, ignition switch, spark plug, additional resistor and its short-circuit device, high and low voltage wires, etc. 2. Identification method: When all the wiring of the igniter is connected, do not connect the power line (the charging end of the AC igniter) first, or disconnect the high-voltage output line of the magneto in advance. After ensuring that the ground wire of the igniter is well connected to the ground wire of the vehicle circuit, pull the high-voltage cap out of the spark plug and insert a spare spark plug to ground it on the vehicle body. Finally, connect the DC circuit of the motorcycle (the live wire is connected to the positive terminal of the battery) to the charging end of the igniter.
6
5
Share

Where is the Lexus Defogger Switch?

The Lexus defogger switch is located on the leftmost button in the center of the longest row of switches on the center console. Here is a related introduction to defogging methods: 1. Using the car air conditioner: Adjust the air vent to the windshield position, turn on the air conditioner, engage the compressor, and rotate the temperature knob to the warm air position. This method can both defog and provide warmth. 2. Using anti-fog spray: Spray "car glass anti-fog spray" (such as Fog Fighter) onto the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a thin transparent protective film on the surface, effectively preventing moisture from condensing into fog. One application can prevent fogging for about 10 days.
16
0
Share

Why does the Beidouxing's low beam not work while the high beam does?

The low beam of the Beidouxing car may not be working while the high beam does because the low beam filament might have burned out. Here is more information about high and low beams: 1. High beam: Adjusts the intensity of the light based on the distance of the filament. The high beam is at its focal point, emitting light that is parallel and highly concentrated, providing greater brightness and the ability to illuminate distant and high objects. When the high beam is beyond its focal point (between 1 and 2 times the focal distance), the emitted light diverges, illuminating a larger area of nearby objects. 2. Low beam: The low beam is designed for close-range illumination. Its design requirements include a wide coverage angle (160°) and short illumination distance, with no adjustable focus.
6
5
Share

What do ODO and TRIP mean on a car?

ODO is the abbreviation for odograph, which means odometer; TRIP represents the single-trip mileage, i.e., the distance recorded after manually resetting the odometer. Extended information about the car dashboard is as follows: 1. Introduction: The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Odometer: The odometer is a digital instrument that operates through the meshing of the counter drum gear with the worm gear on the speedometer drive shaft, causing the counter drum to rotate. Its characteristic is that when the upper drum completes a full rotation, the lower drum rotates 1/10 of a turn. Like the speedometer, modern odometers also include electronic versions, which obtain mileage signals from speed sensors. The accumulated mileage data in electronic odometers is stored in non-volatile memory, preserving the data even when power is off.
9
0
Share

Where is the one-touch window lift for the 2021 Leiling Sport Edition?

Open the car door, press the one-touch start switch, raise the power window to the top, continue pressing the switch for 5 seconds, then lower the power window to the bottom, and keep holding the switch for another 5 seconds to complete the setup for one-touch window lift. Here is an introduction to the one-touch start feature: 1. Introduction: The car one-touch start is a part of smart car devices, a button mechanism designed to simplify the ignition process, which can also be used to turn off the engine. The car one-touch start can be installed at the original key lock position or as an independent panel modification. 2. Functions: The functions of the one-touch start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-touch start, one-touch shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, and a trunk opening function.
1
3
Share

How Many Years Until the Wuling Hongguang is Mandatorily Scrapped?

There is no mandatory scrapping period for the Wuling Hongguang; it only needs to pass the annual inspection. Additional information is as follows: 1. Introduction: The Wuling Hongguang is the first self-developed crossover product between commercial vehicles and passenger cars launched by SAIC-GM-Wuling. This product features a sleek exterior design, a versatile and practical spacious cabin. 2. Exterior: The Wuling Hongguang adopts the currently very popular double-U front face design and a three-dimensional vertical waterfall-style chrome grille, which not only makes the front look more stylish and dynamic but also inherits some characteristics of the GM series. The striking eagle-eye crystal diamond headlights and feather-shaped crystal diamond front fog lights further enhance the vehicle's premium feel.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.