What kind of engine oil should be used for the second maintenance of Geely Vision?

1 Answers
ColinRose
07/29/25 9:52pm
For the second maintenance of Geely Vision, you can replace it with a well-known brand of semi-synthetic 5W-30 engine oil. When changing the engine oil during maintenance, be sure to refer to the vehicle's maintenance manual. Generally, turbocharged engines are recommended to use fully synthetic oil, while naturally aspirated engines can use semi-synthetic or original equipment manufacturer (OEM) engine oil. Second maintenance contents: Replace the three filters and engine oil; check whether the brake fluid, transmission oil, and power steering fluid should be replaced; inspect the brake pads, tires, shock absorbers, and suspension; check the spark plugs, throttle body, and fuel supply system; rotate the front and rear wheels and perform routine checks (lights, battery, etc.). Body cleaning: Interior cleaning every 3-6 months; especially during seasonal changes, consider the entire interior, not just the dashboard, including the air conditioning ducts and under the seats; for the exterior, wash the car after rain, and promptly clean bird droppings and insect remains on the body; wax the car approximately once a month. Vehicle maintenance: Proper maintenance not only ensures safety but also significantly extends the vehicle's service life and usage cycle, reduces cost expenditures, and achieves twice the result with half the effort.
Was this review help?
1
3
Share
More Forum Discussions

What is the method for bleeding antifreeze?

Antifreeze coolant refers to a coolant with antifreeze function. Press the button to open the front engine hood. Then lift the front engine hood. After that, open the cap of the small coolant reservoir. Then drain all the antifreeze. Next, fill the reservoir with antifreeze until it is full. Run the engine until the water temperature reaches 90 degrees and no longer rises. Then open the reservoir cap to release the air.
17
2
Share

What are the specific steps for vehicle exhaust emission testing?

Information entry needs to be performed inside the login booth. The testing scheduler will log into the computer and allocate the testing lines. Vehicles ready for inspection can only proceed when they arrive at the designated testing line. Test personnel will follow the computer's instructions to perform the operations. After passing a series of tests successfully, the testing department will issue the environmental label to the vehicle owner.
16
1
Share

What are the steps for rear axle removal and installation?

First, lift the vehicle to be disassembled to a suitable height, and begin by removing the rear stabilizer link. Remove the rear stabilizer bar, then proceed to disassemble the outer end screws of the left and right upper link swing arms. Loosen the connecting screws. Remove the four 17mm screws securing the rear axle, and the rear axle can then be taken off. Tighten the screws of the left and right upper link swing arms and the exhaust pipe fixing rubber block, and finally reinstall the rear stabilizer bar.
20
0
Share

Difference Between 97 and 98 Octane Gasoline

Compared to 97 octane, 98 octane gasoline has a higher anti-knock index (RON) by one octane unit. Increasing the octane number of 97 octane unleaded gasoline by one unit requires greater technical difficulty and higher processing costs. The higher the octane rating, the stronger the anti-knock performance. What people generally consider as "purer" and better is mainly reflected in the gasoline's anti-knock properties. The applicable ranges for different octane ratings are as follows: 1. 90 octane gasoline: Suitable for vehicles with engine compression ratios between 7.5 and 8.0. 2. 93 octane gasoline: Suitable for vehicles with engine compression ratios between 8.0 and 8.5. 3. 97 octane gasoline: Suitable for vehicles with engine compression ratios between 8.5 and 9.5.
16
1
Share

What to Do When the Baojun 560 Remote Key Fails?

It is recommended to replace the battery. Here are some precautions for using car keys: 1. Do not leave the spare key in the car: If the smart key is lost due to improper storage, it can cause many inconveniences, and the cost of re-matching is relatively high. 2. Avoid contact with metal objects: Contact with or coverage by metal objects may cause the smart key to malfunction. Additionally, other items may damage the smart key during bumps. For smart induction keys, changing the key requires modifying computer parameters and re-matching a new set of keys. The owner needs to provide vehicle and identity proofs, and the manufacturer must provide the corresponding parameters or password for the vehicle model. After replacement, the lost key can no longer start the engine. 3. Do not use the wrong battery: Be cautious when replacing the battery for the smart car key. Any mistake can burn out the circuit board inside the key. Owners should try to replace the battery at a professional 4S shop. 4. Avoid rough handling: Most smart keys have internal circuits that are not highly impact-resistant and can be easily damaged by severe collisions. Moreover, if the smart car key gets wet, the internal circuits may burn out, causing the remote to fail. Additionally, avoid placing the smart key under the windshield or in other high-temperature environments where it is exposed to direct sunlight.
8
1
Share

How to Solve the Restricted Function Issue of BYD Qin EV?

When the vehicle has restricted EV functions, it is necessary to immediately take it to a repair shop or 4S store for professional repair to avoid unnecessary trouble during use. About EV: EV stands for electric-vehicle, which is the abbreviation for electric vehicles. Advantages of pure electric vehicles: They are quite environmentally friendly, generally do not produce any tailpipe emissions, and therefore do not cause pollution to the environment. Moreover, pure electric vehicles produce very little noise during driving, making them quite comfortable to ride in. Disadvantages: Their range is certainly not as good as that of fuel-powered vehicles. In remote areas, charging may not always be convenient. Additionally, in terms of nationwide coverage, pure electric vehicles still have a long way to go. Related information: Besides EV, there is also HEV, which stands for hybrid-electric-vehicle, referring to hybrid vehicles that mostly use fuel and electricity as the vehicle's power source. Compared to pure electric vehicles, this type of vehicle eliminates the hassle of self-charging.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.