What kind of engine oil should be used for the Avancier 370?

2 Answers
ElainaMarie
07/25/25 2:03am
The Avancier 370 is recommended to use fully synthetic engine oil. Detailed information about the Avancier 370 is as follows: 1. The Avancier is a mid-size SUV launched by GAC Honda. Compared to models equipped with naturally aspirated engines, turbocharged engines require higher-performance engine oil to protect the engine. 2. In terms of power, this car has two models: the 240 model and the 370 model. The 240 model is equipped with a 1.5T turbocharged engine, while the 370 model is equipped with a 2.0T turbocharged engine. Since this car uses a turbocharged engine, it is recommended to use fully synthetic engine oil to protect the engine and extend the maintenance cycle. 3. There are three types of engine oil used in cars: mineral oil, semi-synthetic oil, and fully synthetic oil. Compared to mineral oil and semi-synthetic oil, fully synthetic oil performs better and has a longer usage cycle. In cold start conditions, using fully synthetic oil makes the engine run more smoothly, saves fuel, and improves the engine's fuel economy.
Was this review help?
3
5
Share
McAustin
08/10/25 4:25pm
I've been driving the Honda Avancier 370 for over two years, consistently using 0W-20 full synthetic engine oil. This oil flows quickly during cold starts, preventing engine wear, especially suitable for turbocharged engines. After each oil change, the car runs smoother with reduced noise and slightly better fuel efficiency—average fuel consumption dropped by about 0.5L. I recommend checking and replacing it every 8,000 km or six months; don't delay too long. I use brands like Shell and Mobil, choosing API SN grade or higher to ensure cleanliness and prevent carbon buildup. If you frequently drive on highways or in high-temperature areas, you might consider 5W-30 viscosity, but generally, 0W-20 is sufficient. The oil has a mild odor, maintenance is simple, and cold starts in winter are super quick.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Where is the windshield washer switch located on the old Buick GL8?

The windshield wiper switch of the old Buick GL8 is located on the wiper control lever on the right side of the steering wheel. To use the windshield washer function, pull the wiper control lever toward the driver to spray water. When the transparency of the front windshield becomes poor, especially during nighttime driving when dust on the glass scatters light, it is necessary to spray windshield washer fluid to maintain the windshield in optimal transparency. If you frequently use the wipers, it is important to check the windshield washer fluid level. If the fluid level is too low, make sure to add more in time to avoid dry wiping. Do not operate the wipers without spraying washer fluid, as dry wiping can easily cause abnormal wear to the wiper blades and damage to the wiper motor. If the front windshield is very dirty, it is best to gently clean the dirt off the windshield with a dry cloth first to reduce unnecessary wear on the wipers. When the wiper blades are not wiping effectively, try soaking them in water first, then sand them back and forth with water sandpaper, rinse them clean with water, and reattach them to the windshield. Then test the wipers to see if there are any uneven spots. If the problem persists, repeat the process a few more times. This method is mainly used when the wiper blades are slightly damaged.
17
3
Share

How to Deal with the Ford Edge Sunroof Abnormal Noise?

The solutions for the Ford Edge sunroof abnormal noise are as follows: 1. The sunroof sealing strip, if exposed to rain or sunlight for a long time, can easily age. Rubber conditioner can temporarily restore the performance of the sealing strip. 2. Loose screws may cause roof noise and even pose a risk of the sunroof falling off. Locate the sunroof screws and tighten them. 3. If there are dust particles in the sunroof slide rail, remove them with a towel. Sunroof maintenance suggestions are as follows: 1. During car washing, avoid directing the high-pressure water jet directly at the sealing ring. This not only easily deforms the sealing ring under the pressure of the high-pressure water jet, causing water to enter the car, but also greatly damages the sealing ring. 2. On extremely bumpy roads, it is best not to fully open the sunroof, as the strong vibration between the sunroof and the slide rail may cause deformation of related components or even damage the motor. Additionally, it is strictly forbidden to open the sunroof during rain or car washing. 3. The biggest concern when using a sunroof is leakage. Proper use and maintenance of the sunroof can effectively prevent leaks. Before the rainy season, in addition to cleaning dust from the slide rail and sealing strip gaps, a small amount of plastic protective agent or talcum powder should be sprayed on the sealing strip and other components.
14
4
Share

Is the BMW N54B30 engine twin-turbo or single-turbo?

N54B30 is a 3.0L twin-turbocharged engine that incorporates almost all technologies BMW could offer for an engine except turbocharging. To comply with stricter emission regulations while meeting consumers' demands for driving pleasure, BMW introduced the N54 twin-turbo engine in 2007, marking the beginning of its turbocharging journey. More details are as follows: 1. The 3.0L twin-turbo N54B30 engine comes in various tuning versions to match different BMW models. The highest-power version delivers 335 horsepower (250kW) at 5900rpm and 450N·m at 1500-4500rpm. 2. The N54 engine evolved from the exceptionally well-designed naturally aspirated inline-six N52 engine from 2001, which utilized nearly all BMW engine technologies except turbocharging, achieving best-in-class performance. Building upon N52's excellent and mature design, the N54 added two small-diameter turbochargers and introduced advanced direct fuel injection technology, significantly improving power output compared to N52. 3. BMW engineers conducted extensive experimental work on the N54 engine, resulting in substantial power gains. The two small-diameter turbos can spool up at lower RPMs, giving the N54 nearly instantaneous throttle response similar to naturally aspirated engines. However, the twin-turbo design made the N54's intake/exhaust systems relatively complex and necessitated the removal of BMW's advanced Valvetronic electronic valve technology. The N54 engine represents BMW's bold attempt and innovation in turbocharging technology.
18
4
Share

What is the purpose of the heat shield above the exhaust pipe?

The exhaust pipe remains in a high-temperature state. Without a heat shield, the heat can raise the temperature of the car floor, affecting the interior temperature and posing a risk of melting the felt layer covering the car floor. Below is some information about the exhaust pipe: 1. During vehicle idling and low-speed driving: It reduces radiant heat flow and also serves to block hot air from directly conducting convective heat exchange with the car body. Therefore, during this time, it is preferable for the heat shield to dissipate heat as quickly as possible. 2. During high-speed driving: Its role is primarily limited to reducing the transfer of radiant heat flow, as the airflow beneath the car body is faster at this time, providing a cooling effect on the heated components. In other words, convective heat exchange at this stage will help dissipate heat from the car's underbody parts.
5
1
Share

Can the Excelle still be driven with the engine yellow light on?

The Excelle should not be driven for a long time with the engine yellow light on. It is necessary to go to the repair shop immediately for treatment. The engine yellow light indicates that the engine has a fault, mainly caused by sensor problems, maintenance problems, oil quality problems, etc. The following is a specific analysis of these problems: Sensor problems: The sensors mentioned here include water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or the signal is interrupted, the car's ECU cannot accurately obtain the engine data, and the engine fault light will come on. Maintenance problems: Poor engine maintenance is the most common cause of the engine fault light coming on. Vehicles have a certain maintenance cycle. If the owner does not maintain the vehicle on schedule, coupled with poor driving habits, the burden on the engine operation will increase, and eventually, the yellow light will come on as a reminder. Oil quality problems: The oil quality mentioned here includes fuel and engine oil. The fuel injected into the car generally has a label, and the engine oil is also divided into semi-synthetic and full synthetic. The manufacturer usually recommends which label of fuel and which type of engine oil the owner should use. If the owner does not add as required, it will cause engine wear over time, and the fault light will also come on.
7
2
Share

How to Raise and Lower the Spoiler on Tesla Model X?

Below are the methods for raising and lowering the spoiler on Tesla Model X: The Tesla Model X allows for both manual and automatic control of the spoiler. 1. On the car's central console, you can manually control the spoiler's movement via the central display screen. 2. During driving, the spoiler automatically adjusts based on the vehicle's speed. Here is a detailed explanation of the Tesla spoiler: The Tesla Model X features a rear spoiler, which enhances driving stability and adds to the car's sporty appeal to some extent.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.