···
Log in / Register

What kind of engine oil should be used for maintenance of Volkswagen Bora 1.5L?

4 Answers
LaJaxson
08/30/25 8:18am

Volkswagen New Bora uses 5W-30 engine oil for maintenance. Additional information: 1. Introduction to engine oil: Engine oil, also known as engine lubricating oil (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption for the engine. It is often referred to as the 'blood' of automobiles. 2. Composition of engine oil: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, imparting new characteristics. Additives are an essential part of lubricating oil.

Was this review help?
8
4
Share
BrandonRose
09/12/25 5:12am

I've been driving a Volkswagen Bora 1.5L, and it's crucial to pay attention to specification standards when choosing engine oil. This engine typically uses 5W-30 or 5W-40 full synthetic oil, which must meet Volkswagen VW 502 00 or 508 00 certification; otherwise, it may affect performance. Synthetic oil offers better fluidity, stronger cold-start protection, and can reduce engine wear to extend its lifespan. I recommend Castrol Edge or Mobil 1, as they are more stable under high temperatures. Change the oil every 7,500 to 10,000 kilometers, preferably with an original equipment manufacturer (OEM) oil filter. Remember to check the owner's manual for details, as there may be slight variations between different model years. For example, post-2019 models tend to favor lower viscosity oil. Regular maintenance can save you from major repair costs and keep the car running smoothly.

Was this review help?
17
4
Share
Expand All
OLilah
10/26/25 6:01am

As a Bora owner, I prioritize cost-effectiveness and efficiency when it comes to engine oil. Synthetic oil is sufficient, and a 5W-40 viscosity suits most road conditions—reasonably priced yet durable. I opt for brands like Mobil Super or Shell Helix, purchasing genuine products online to save costs. I get it changed at a small workshop for just 300 yuan, replacing it every 8,000 kilometers to prevent carbon buildup. Don’t skimp on this expense—low-quality oil can lead to increased fuel consumption or malfunctions. Replacing the oil filter at the same time improves efficiency. Also, avoid using oil that’s too thin or thick for the season to maintain quick engine response. With proper maintenance, this car is economical and hassle-free.

Was this review help?
7
5
Share
Expand All
OliveDella
12/09/25 6:20am

After driving a Bora 1.5L for several years, the key to oil maintenance lies in regular servicing. I use full synthetic 5W-30 oil with a replacement cycle set at one year or 10,000 kilometers. This protects engine components such as pistons and bearing shells from wear. Choosing quality oil like Castrol and having it changed at authorized shops is crucial. Neglecting maintenance can lead to issues like increased sludge clogging pipelines, affecting driving safety. During oil changes, it's also good to check the coolant and brake fluid. Developing this habit prevents future troubles, ensuring the car runs smoothly and quietly.

Was this review help?
16
0
Share
Expand All
More Forum Discussions

What Causes the CVT Noise in Corolla?

The reason for the CVT noise in Corolla is the presence of persistent dirt and impurities inside. Blockage Formation: Especially when dirt and impurities accumulate inside the valve body, forming a blockage that prevents effective regulation of oil pressure. Example Introduction: Taking the Corolla 2021 1.2T S-CVT Pioneer PLUS version as an example: It is a compact 4-door, 5-seater sedan equipped with a CVT continuously variable transmission, with a top speed of 180 km/h. The Corolla 2021 1.2T S-CVT Pioneer PLUS version has a length, width, and height of 4635mm, 1780mm, and 1455mm respectively, a wheelbase of 2700mm, and uses a 1.2T turbocharged engine with a maximum torque of 185 Nm, maximum horsepower of 116 HP, and a fuel tank capacity of 50L.
20
3
Share

What is the reason for the Elantra getting stuck when shifting in and out of P gear?

Elantra getting stuck when shifting in and out of P gear is due to P gear lock. Release the brake: First release the brake pedal, then press it again, and try to shift gears; if it doesn't work, try turning the steering wheel slightly before shifting. If it still doesn't work, restart the ignition, press the brake again, and then shift gears. Open the hood: If the above methods cannot solve the problem, open the hood, disconnect the battery, and then reconnect it. After restarting the ignition, press the brake again and shift gears. This method usually solves the P gear lock problem; if the P gear remains stuck and cannot be shifted, then you need to contact a 4S store. This is likely caused by damage to the gear limit switch, brake light switch, or brake light fuse, and repairs are required.
1
0
Share

What is the tire maintenance reminder for the X-Trail?

The tire maintenance reminder for the X-Trail is low tire pressure. Impact absorption: Car tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb the shocks encountered during driving. Comfort: They ensure good ride comfort and smooth driving, maintain excellent adhesion between the wheels and the road, improve the vehicle's traction, braking, and off-road capability, and bear the weight of the car. Tire pressure function: Low-pressure tires are mainly used for private cars. High-pressure tires are primarily used for large trucks or buses. The recommended tire pressure for high-speed driving is 2.5 kilograms per cubic centimeter.
6
0
Share

What is the introduction of the gear positions for the Mercedes-Benz 350 automatic transmission?

Below is an introduction to the gear positions of the Mercedes-Benz 350 automatic transmission car: Parking Gear: The P gear is the parking gear, used for long-term parking of the vehicle; the R gear is the reverse gear, which is engaged when the vehicle needs to move backward. Neutral Gear: The N gear is the neutral gear, used when the vehicle is parked for a short time without turning off the engine; the D gear is the drive gear, and when the gear lever is placed in the D position, the vehicle will automatically shift gears based on throttle opening and speed data. Sport Mode: The S gear is the sport mode, making the vehicle's driving experience more sporty; the M gear refers to the manual mode, where gear shifting is manually completed by the driver when the gear lever is engaged in the M position; the I gear is the low-speed gear.
18
1
Share

What is the difference between 24V brushed and brushless motors?

The differences between brushed and brushless motors: 1. Brushed motor: It uses carbon brushes as the two power contacts of the motor, controlled by a speed-regulating handle and controller, achieving stepless speed regulation for electric bicycles from 0-20 km/h through secondary gear reduction and an overrunning clutch. Currently, this type of brushed high-speed motor has high gold content, strong gear strength, good wear resistance, and reasonable design, resulting in a low repair rate. Moreover, the cost of repairing and replacing gears and the motor is relatively low, effectively reducing the maintenance costs of electric bicycles. Additionally, brushed motors can easily achieve human-powered riding through an overrunning clutch and flywheel. Brushed motors use mechanical commutation via brushes! 2. Brushless motor: The cost of its speed control system is higher than that of brushed high-speed motors, and the controller is prone to failure during use. Electric bicycles equipped with brushless motors must reach speeds of 35 km/h or more to achieve their optimal working efficiency. However, since electric bicycles are managed as non-motor vehicles with a speed limit of 20 km/h or below, brushless motors are not highly practical for electric bicycles as they reduce working efficiency. Currently, their main advantage is low noise. Brushless motors use electronic circuits for commutation! They have detection components to detect polarity!
18
2
Share

Does the Audi A6 Need to Warm Up?

The Audi A6 also requires warming up before starting. Warm-up Duration: In summer, you can warm up the car for about one minute while stationary, whereas in winter, it's necessary to idle for approximately 3 minutes to complete the warm-up. Reasons: After being parked overnight, the engine oil flows back to the oil pan. Upon restarting, it takes time for the oil to gradually return to its original position. Therefore, idling for about a minute after starting the car provides a buffer period for the oil to circulate back to its working areas and perform its lubricating function. Additionally, this helps raise the engine's operating temperature to its normal working range. In winter, due to lower temperatures, the engine's operating environment is colder, and the oil's fluidity decreases, requiring a longer idle time for both the engine temperature and oil to reach optimal working conditions.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.