What kind of engine oil should be used for Land Rover diesel models?

1 Answers
MacEmersyn
07/29/25 10:35pm
Land Rover diesel models use Mobil Delvac 1, API-CI-4, 5W-40 engine oil. Here is relevant information about Land Rover diesel models: 1. Precautions for using Land Rover diesel engines: (1) Never let the diesel fuel run out before refueling for Land Rover diesel engines, as the engine will idle and draw in air under such conditions, causing severe damage. (2) Diesel engines have different requirements for engine oil compared to gasoline engines and require specialized oil. (3) Most modern diesel engines are equipped with glow plugs, and the indicator light informs users that the glow plugs are heating up. 2. Advantages of Land Rover diesel models: Diesel Land Rovers have stronger climbing capabilities. Due to their higher compression ratio and thermal efficiency, diesel engines provide greater torque, more power, and can safely maintain high-speed climbing performance without power loss. Diesel Land Rovers are more fuel-efficient than gasoline models. The fuel supply system of diesel engines is relatively simpler in construction compared to gasoline engines, resulting in fewer failures and a longer service life.
Was this review help?
17
2
Share
More Forum Discussions

Where is the auto hold function located in the Mercedes-Benz GLC260?

The auto hold function of the Mercedes-Benz GLC260 is set via the AUTO button on the center console panel. Exterior design: The Mercedes-Benz GLC features elegant body lines, presenting a sophisticated and refined appearance. It is equipped with large-size thick-walled tires, creating a minimalist impression. The rear design echoes the front styling, with the taillights exuding a sense of stability, complemented by dual exposed exhaust pipes on both sides. Interior design: The interior adopts a youthful and distinctive design, showcasing an overall refined and elegant atmosphere. The steering wheel perfectly matches the interior style, featuring electric adjustment (up/down, forward/backward), memory function, and paddle shifters, exuding a premium feel. The center console is adorned with a 10.25-inch touchscreen, while the instrument cluster utilizes a dual-barrel design for easy and clear information reading.
15
5
Share

Is the New Santana Equipped with Independent Suspension?

The front suspension of the New Santana is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension. Exterior of the Santana: The front face is more rounded, with smoother lines, and both the headlights and taillights are more aesthetically pleasing and eye-catching. Interior of the Santana: It features a variable-frequency air conditioning system, which not only enhances cooling capacity but also reduces energy consumption. The advanced central electronic control system allows for intelligent centralized control of functions such as central locking, power windows, headlight warning alerts, and remote control. Features of the Santana: The high-end models of the New Santana are equipped with ESP, cruise control, and leather seats. Some manual transmission models also come with automatic air conditioning, though the control panel differs from that of automatic transmission models. The seat heating buttons are placed in front of the gear shift lever.
13
4
Share

How to turn on the air conditioning in a Citroën?

Citroën air conditioning activation method: To turn on the cold air, press the AC switch and adjust the temperature by turning the left button toward the blue area. The middle position represents a moderate temperature. For warm air, adjust the temperature button toward the red area, and note that turning on the warm air does not require activating the AC switch. Below are precautions for using Citroën air conditioning: 1. Do not smoke in the car with the air conditioning on. If smoking, adjust the air ventilation control to the "exhaust" position to expel smoke from the vehicle. 2. Avoid resting or sleeping for extended periods in a stationary car with the air conditioning on. The poor ventilation inside the car can lead to CO poisoning from engine exhaust leaking into the cabin, which may even result in death. 3. Try not to use the air conditioning when driving at low speeds, as this can negatively impact the lifespan of both the engine and the air conditioning compressor.
3
0
Share

What are the differences between imported and domestically produced Audi A6?

Audi A6 imported and domestically produced differences are: 1. Different engines used: The imported Audi A6 is equipped with 1.8T engine, 2.0T engine, and 3.0L supercharged engine; The domestically produced Audi A6 is equipped with low-power version 2.0T engine, high-power version 2.0T engine, and 3.0L turbocharged engine. 2. Different models: The imported Audi A6 is a station wagon; The domestically produced Audi A6 is an extended sedan. The domestically produced Audi A6's low-power 2.0T engine has a maximum power of 140kW and a maximum torque of 320Nm; The high-power version 2.0T engine has a maximum power of 165kW and a maximum torque of 350Nm; The 3.0L turbocharged engine has a maximum power of 250kW and a maximum torque of 500Nm.
2
0
Share

What type of rear axle oil should be used for the BMW X6?

BMW X6 rear axle oil requires synthetic gear oil that meets API certification standards GL4 and GL5, with a viscosity of 75w90. Fuel must be clean: High impurity content in fuel can accelerate the wear of the electric fuel pump, reducing its service life. If the fuel is not clean, it can also lead to clogging of the fuel filter and fuel injectors, affecting fuel supply pressure and normal injection volume, thereby reducing the engine's performance. Correct fuel selection: The engine has high requirements for fuel quality and grade, with even higher demands for fuel-injected engines. For cars equipped with catalytic converters and oxygen sensors, only unleaded high-octane gasoline should be used. If leaded gasoline is used, the exhaust catalytic converter will fail after driving more than 400 kilometers, and the oxygen sensor will also malfunction, affecting the normal operation of the engine.
9
0
Share

What are the functions of the automotive electronically controlled automatic transmission system ECT?

There are many functions of the automotive electronically controlled automatic transmission system ECT. Here is a detailed introduction to ECT: 1. Specific functions of ECT: The main functions of the automatic transmission ECT are to automatically transmit and cut off the vehicle's power, automatically change the speed and wheelbase, automatically change the vehicle's driving direction, automatically engage and disengage the torque of each drive axle, and automatically drive various devices. Through the electronic control device, it automatically controls each hydraulic or pneumatic valve, thereby changing the working state of the planetary gear system and the torque converter ratio of the hydraulic torque converter. 2. Advantages of ECT: It has a higher power load capacity than CVT and has been more fully verified in the market. Therefore, its reliability is relatively the highest among automatic transmissions. It features mature technology and relatively lower R&D costs.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.